We have a working app and we want to field test it by putting on our client's iPhone. We've already put the app onto one of our phones through iTunes with no problems. When we tried to get it onto the other phone (after getting it onto iTunes) there was an error.
The other computer already has the provisioning profile on iTunes, both phones are included in the profile, both phones are the same model (4s) and are running the same OS.
The only difference I can think of is that we are trying to transfer through a PC for this one, whereas we used a Mac. I hope this isn't the problem.
Is there any way to know what's causing the problem? Or a workaround?
Please try testflight or diawi for installation of app. its very easy.
Have you tried selecting the device under "Organizer" and choosing "Use for development"?
Related
I believe this is a duplicate question, but examining the others I could not find my problem exactly.
I have developed a flutter app and I intend to publish it. So I rented a virtual Mac, loaded the project in XCode and tested it on a simulator. Everything worked fine.
I have an Apple Developer Account, Certificates, registered an iPhone, etc., but it seems that I have to physically connect the device to the computer to be able to run it on the iPhone. No way to do that remotely (I'm in Brazil and the virtual Machine in NY).
XCode tells me to plug in the device so it can register it (but I have registered it already in the developer's site).
I thought it would be possible to generate some kind of executable to download to my iPhone, but it appears that is note the case.
Is there any other way I can do that?
Maybe I can skip this step and try to publish the app, because it is the same project as an Android app already tested and published in Play Store.
The answer is yes, the modern answer is probably TestFlight. But this has always been possible using OTA downloads. To do this, archive your app, create an OTA manifest and put this on a web server somewhere. Then you can download the app straight to your phone (assuming it's signed with the correct provisioning profile and all that). We used to do this a lot before TestFlight came along.
This question and
this article are somewhat related to what you want to do
I was having trouble to test without an iphone what I did is register this device on my account https://messapps.com/wp-content/uploads/2016/08/udid.png and so far I could build the app for iOS.
I have created an iPhone application. I don't have the iPhone and I want to test the application on the iPhone of my friend who is far from me. How can I test it on his iPhone?
When I searched on google, it told me that you need to have the device with you. Is it possible to send the wrap and send the application to a remote location and get tested from there? I also have the Apple ID and license.
Yes with a tool like TestFlight you will be able to check wether or not your will work on a device. Thus is good for acceptance testing but never for technical working of an app.
But when it comes to really testing a device is needed, there is not way around it. You should do performance testing on a device.
Also there is no way to use the debugger unless it is connected to your development machine.
If you are developing for iOS get an iOS device.
It's possible, check Test Flight:
https://testflightapp.com/
I used it in the past for the same scenario as you
You should have a device yourself for testing on, before you publish anything in the App Store. Testing in the simulator is just not the same as testing on a device.
On developer.apple.com you will need to create a Ad Hoc distribution profile. You will also need to add all the devices you want to run the app on to this profile. Once you have the profile and you have it installed in Xcode, you can run an Archive build and sign it with the distribution profile. After this you can select the archive and click on 'Distribute...' to generate a .ipa file.
Once you have this .ipa file, you could use a site like testflightapp.com to distribute the app to test-devices. (you could also just email it ;-) )
If you are looking for just a way to transfer the ipa to someone else the best simplest solution for that would be http://www.diawi.com/ or https://appsendr.com
Get the target Device UDID and add it to your testing list, Create your IPA, drag it to the site above, Done.
No need to signup or anything like that.
I like appsendr better because of the small app they provide.
Lets you drag the IPA to your tool bar and have the ipa url right in your clipboard once it's uploaded.
Anyone having problems deploying Enterprise apps on iPhone/iPads running the released version of iOS 5 using the OTA ("over the air") methodology?
During the installation process, we get the alert box: "the app could not be installed at this time". Tapping the Retry button does nothing. In some cases, repeated tapping of the Retry button eventually results in a gray, empty launch icon being left on the home screen. No app installed. No other errors.
Anyone else seeing this or have a resolution?
The below description is a bit involved, but please bear with me as it may help others who run into the situation. I will post the resolution if get a resolution from Apple. So far, no joy there.
Our app refuses to install OTA on iOS 5. This same app WILL install on iPhone/iPad devices running iOS 4.x.x AND the same app will install on iOS 5 devices physically connected to a desktop machine using the iTunes app.
The Apple Developer forums under the IOS 5 Beta category complained about the problem but no indication of resolution as of last week just before the official release of iOS 5.
Cookies are set to be accepted.
Bowser cache and history cleared.
Using mobile safari originally installed with original iOS version 4.x.x.
System hardware and operating system configuration
iPad 2, iPhone 4 or any iPhone device running iOS 5 RELEASED version.
Browser and version
Mobile safari that is installed with iOS 4 on ipad2. Don't know if mobile safari upgrades with ios 5 upgrade.
Using a corporate wifi network. Yes, we are behind a firewall and use a proxy server. Since iOS4 devices install without problems, I don't think installation being blocked by the proxy or firewall.
Enterprise app built with Xcode 4 and ios5 sdk provided with it. Built to be backward compatible with iOS 4.0.
Distribution provisioning profile is correct as we have been using it for several weeks.
This app installs properly on iOS 4 devices both over the air and via iTunes application method.
This app installs properly on ios5 devices through the physical connection with iTunes application on the Mac desktop.
Steps to reproduce:
User types in the URL in mobile safari on iPhone/iPad running ios5.
The resulting webpage shows the download app link.
User taps on the link and is asked if they want to install the app.
User taps the yes, install button.
App proceeds to install.
A gray launch icon shows up on the home screen with the progress bar empty at the bottom of the icon.
Message below the icon indicates "loading".
Seconds later, user gets the "cannot download app at this time" error message as seen in screen shot attached.
Tapping the retry button results in the same action just described.
Tapping done results in the download stopping.
If you tap retry several times, user sometimes is left with the gray empty launch icon, which will not launch and cannot be deleted.
Note: In the apple developer forums, under the iOS 5 beta category, people are describing the exact same problem with no resolution.
Had the same problem, and was able to resolve it. However, the error noted is not specific to a single cause that handles every case... some detailed investigation needs to occur.
Your best bet is to connect the device to your Mac, and using the Organizer of xCode view the console logs while you are attempting to do a wireless deployment. There will be some useful information available -- please post the logs.
For my case -- the icon files were missing from the build, as a result of moving from xCode3 to xCode4 and also, the distribution plist was referencing an image that returned a 404. Both were logged in the console, but not very clearly.
Also, as a sanity check, manually verify the URL to your IPA file also.
I had this same problem and was sure everything was correct in my project; but restarting Xcode and doing a clean revealed my Enterprise scheme had somehow defaulted to the wrong provisioning profile.
Re-selecting the correct profile and re-archiving the app fixed the issue for me, I'm able to install an enterprise app on both iOS4 and 5.
I wanted to chime in after fighting this for a few hours. It is iOS 5 specific.
We had an htaccess password protection on the directory. Removing this allowed the app to finally download. So if you have htaccess, perhaps you can point the user to a parent directory that is password protected, then navigate to the subdirectory containing the app that isn't password protected. This is a temporary solution, apple needs to fix this.
Another thing to consider is the URL you specified in your over-the-air Application.plist file. I received the same error message ("-application- could not be installed at this time") because the URL I specified was too unspecific. Rather than writing "directory/directory/application.ipa", I had written "directory/directory/". You must include your application in the complete URL of the plist file's configuration.
If you didn't do this, don't fret! You don't have to rebuild the entire thing from step one, you can open your .plist file in any standard text editor and simply change the URL.
We had the same thing.
Our mistake was to point to a wrong 512.png icon in the manifest.
Which was no problem on iOS4 but turned out to stop iOS5 into a "...at this time" alert.
Wanted to chime in on my experience.
In my case, we were changing the address where the IPA file was hosted. Although I updated the PLIST file with the proper URL to the IPA file, iOS was still going after the old URL almost as if it cached the PLIST data. Creating a copy of the PLIST file and renaming it resolved the issue (data within the file remained unchanged)
I met the same problem today. The app can be installed in ios4, but failed in ios5 with "** could not be installed at this time" alert.
According to patricksan's suggestion, I download iPhone Configuration Utility 3.5 for Mac OS X, and try to catch the log while install the app through OTA.
The log helped me finally, one sentence of the log says entitlement 'get-task-allow' has value not permitted by a provisioning profile. It remind me that if the code signing identity in build settings of Project and Targets are correct, after checking them in Xcode, I found the code signing identity are not correct one, they should be iPhone distribution:.... other than iPhone developer:..... After correcting them, and re-Archiving the ipa file, it can be installed in iOS 5 now.
Check your Info.plist for Required device capabilities property. I recommend to delete completely this property if you haven't any restrictions on use.
I have finally gotten my first app to work properly and I'm attempting to send it to the App Store. In my Application Loader, I'm getting this error:
Info.plist does not contain a CFBundleResourceSpecification
I have read on the following SO question that this could be because I am Building on the simulator and then zipping up the app, and sending this instead of building on a proper device.
http://stackoverflow.com/questions/2180201/cant-upload-application-binary-to-the-app-store
However, when I provision a distribution profile, I can't select my IPod Touch under my devices when I have App Store selected. When I switch it to AdHoc I can select it, then I can Build it on the device perfectly, everything works. Has anybody had this issue before?
Any advice would help me here, Thanks!
An App Store build can't be run on a device using Xcode. It's only good for submission.
I want to build my iPhone app only using device ID without connecting the device to my apple PC. Can I do this?
You can use the simulator, and never develop on the device. Is that what you mean? I wouldn't like to be one of your customers when I bought that app from the appstore in that case though - there would be so many defects.
If you don't mean that, how would you get the app on your device? I'm confused.
Are you suggesting that you do not want to test your app on a real device before releasing it? Please don't do that. There are a lot of differences when testing the app on a device or on simulator.
If you want to create a build for adhoc testing without connecting a device to your mac, you can do that by simply creating a mobileprovision file for adhoc testing where you can specify upto 100 device ids. For this you need to be a member of the Apple Developer Program though.
If I read your question right, you want to put your app on your phone without actually connecting your phone?
If so, it is not possible. You must connect your phone to load applications you develop.
if you are registered iPhone developer, u can create Ad Hoc distribution via defining device ids that you want the app to be used (steps are listed at 'Program Portal User Guide' at apple's developer site). then u can install the app on your device via iTunes.
Well, you can't install just based on the device number or something else.
There are two solutions:
1/But what you can do without plugging the phone is to Post your App on some testing platform like TestFlight, or Answers. And you enter users' email address and they can get the email.
2/You can set up a config file that declare your OS X Server address. And add the iPhone into your Server Open Directory. Then you can send and deploy the app to iPhone devices.
If you have future questions, comment.