I am trying to execute this query on sql server 2008r2-
SELECT #lUpd1 = 'UPDATE ts1cust.dbo.t_grgr_xwalk
SET xwalk.WEB = info.WEB,xwalk.AVIVIA = info.AVIVIA,xwalk.MSP = info.MSP,xwalk.QO = info.QO
FROM ts1cust.dbo.t_plan_mspqo_info info, ts1cust.dbo.t_grgr_xwalk xwalk
WHERE info.PLANID = xwalk.ID_471'
but getting below mentioned error-
Msg 4104, Level 16, State 1, Line 1
The multi-part identifier "xwalk.WEB" could not be bound.
You're not allowed to use multi-part identifiers for the assignment side of columns in the SET clause.
SELECT #lUpd1 = 'UPDATE xwalk
SET WEB = info.WEB, --<-- no xwalk. here
AVIVIA = info.AVIVIA,
MSP = info.MSP,
QO = info.QO
FROM ts1cust.dbo.t_plan_mspqo_info info
INNER JOIN
ts1cust.dbo.t_grgr_xwalk xwalk
ON info.PLANID = xwalk.ID_471'
I've also taken the liberty of replacing the table reference with the alias you're using at the top of the UPDATE, and switched to using ANSI JOIN rather than ,
You alias your table t_grgr_xwalk as xwalk, so for the first expression Update Table You should use xwalk too.
SELECT #lUpd1 = 'UPDATE xwalk
SET WEB = info.WEB,
AVIVIA = info.AVIVIA,
MSP = info.MSP,
QO = info.QO
FROM ts1cust.dbo.t_plan_mspqo_info info, ts1cust.dbo.t_grgr_xwalk xwalk
WHERE info.PLANID = xwalk.ID_471'
you can try below:
SELECT #lUpd1 = 'UPDATE ts1cust.dbo.t_grgr_xwalk xwalk
SET xwalk.WEB = info.WEB,xwalk.AVIVIA = info.AVIVIA,xwalk.MSP = info.MSP,xwalk.QO = info.QO
FROM ts1cust.dbo.t_plan_mspqo_info info
WHERE info.PLANID = xwalk.ID_471'
Related
I am converting SQL stored procedure to PostgreSQL stored function. In this stored function inside Update there is From clause.
I want to know how to use From inside Update? Because I am getting error table name "account" specified more than once
CREATE OR REPLACE FUNCTION ETL_Insert_ModifyData( instID numeric)
RETURNS void
LANGUAGE 'sql'
AS $$
--Account
UPDATE account
SET namount = stg_account.namount,
slocation = stg_account.sLocation,
ndept_id = stg_account.ndept_id ,
account.naccount_cpc_mapping_id = stg_account.naccount_cpc_mapping_id
FROM account
INNER JOIN stg_account ON account.naccount_id = stg_account.naccount_id
INNER JOIN department ON stg_account.ndept_id = department.ndept_id
INNER JOIN accountcpcmapping ON stg_account.naccount_cpc_mapping_id = accountcpcmapping.naccount_cpc_mapping_id
WHERE account.ninst_id = instID
AND department.ninst_id = instID
AND accountcpcmapping.ninst_id = instID
--print 'Account completed '
$$
Move the JOIN condition with account table and stg_account to WHERE clause. Also, you need not refer to account in the SET.
Further, prefer shorter aliases (like one or 2 letters) rather than using complete table names.
UPDATE account
SET
namount = stg_account.namount,
slocation = stg_account.sLocation,
ndept_id = stg_account.ndept_id ,
naccount_cpc_mapping_id = stg_account.naccount_cpc_mapping_id
FROM stg_account
INNER JOIN department ON stg_account.ndept_id = department.ndept_id
INNER JOIN accountcpcmapping ON
stg_account.naccount_cpc_mapping_id = accountcpcmapping.naccount_cpc_mapping_id
WHERE account.naccount_id = stg_account.naccount_id
AND account.ninst_id = instID
AND department.ninst_id = instID
AND accountcpcmapping.ninst_id = instID
I tried to update my table like below:
$query = "select *
FROM sites s, companies c, tests t
WHERE t.test_siteid = s.site_id
AND c.company_id = s.site_companyid
AND t.test_typeid = '20' AND s.site_id = '1337'";
$queryrow = $db->query($query);
$results = $queryrow->as_array();
foreach($results as $key=>$val){
$update = "update tests set test_typeid = ? , test_testtype = ? where test_siteid = ?";
$queryrow = $db->query($update,array('10','Meter Calibration Semi Annual',$val->site_id));
}
The above code is working good. But in update query , The column test_typeid is not updated with '10'. Column test_typeid is updating with empty value. Other columns are updating good. I dont know why this column test_typeid is not updating? And the column test_typeid type is integer only. I am using postgreSql
And My table definition is:
What i did wrong with the code. Kindly advice me on this.
Thanks in advance.
First, learn to use proper JOIN syntax. Never use commas in the FROM clause; always use proper explicit JOIN syntax.
You can write the query in one statement:
update tests t
set test_typeid = '10',
test_testtype = 'Meter Calibration Semi Annual'
from sites s join
companies c
on c.company_id = s.site_companyid
where t.test_siteid = s.site_id and
t.test_typeid = 20 and s.site_id = 1337;
I assume the ids are numbers, so there is no need to use single quotes for the comparisons.
This is the MySQL query, now I need this below dynamic query to execute in TERADATA SQL.
set l_sql=concat('SELECT max(',l_rid_col,'), MAX(cid) INTO #c2, #c3 FROM ',p_database,'.',p_table);
SET l_rid = #c2;
SET l_cid = #c3;
And this update query:
update table_a
set row = ifnull(l_rid, 0),
column = ifnull(l_cid, 0)
where databasename = p_database
and tablename = p_table;
But In Teradata I tried this way:
update table_a as a
from (select max(l_rid) TR, MAX(l_cid) TCC
from DEVP.employees) as b
set a.row = b.TR, a.column = b.TCC
where a.databasename = 'DEVP'
and a.tablename = 'employees';
Please remove the alias name from the LHS of the update statement.
a.colA=b.colname should be colA=b.colname
I got the answer:
update table_a from (select max(l_rid) TR, MAX(l_cid) TCC from DEVP.employees )as b
set row= b.TR , column=b.TCC where databasename='DEVP' and tablename='employees';
ISSUE: I just removed the alias name in UPDATE. finally got it.
There are two update queries and 1st update query execute successfully but 2nd update query is not execute and show the following message:
Msg 512, Level 16, State 1, Line 10
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. The statement has been terminated.
1st update query:
update dbo.TblPrePostApproval
set
dbo.TblPrePostApproval.PAApprovedDate = (select dbo.TblMasterInfo.AppRefDate
from dbo.TblMasterInfo
Where dbo.TblMasterInfo.Appid = dbo.TblPrePostApproval.Appid),
dbo.TblPrePostApproval.PAApprovedTenor = '36',
dbo.TblPrePostApproval.PAApprovedAmt = (select dbo.TblMasterInfo.AppReqeustAmt
from dbo.TblMasterInfo
where dbo.TblPrePostApproval.Appid = dbo.TblMasterInfo.AppID),
dbo.TblPrePostApproval.PADisbBr = (select dbo.TblMasterInfo.AppSourceBrName
from dbo.TblMasterInfo
where dbo.TblPrePostApproval.Appid = dbo.TblMasterInfo.AppID)
2nd update query
update dbo.TblPrePostApproval
set
dbo.TblPrePostApproval.PAApprovedDate = (select dbo.TestPost.PADate
from dbo.TestPost
Where dbo.TestPost.Appid = dbo.TblPrePostApproval.Appid),
dbo.TblPrePostApproval.PAApprovedTenor = (select dbo.TestPost.PATenor
from dbo.TestPost
Where dbo.TestPost.Appid = dbo.TblPrePostApproval.Appid),
dbo.TblPrePostApproval.PAApprovedAmt = (select dbo.TestPost.PAAmt
from dbo.TestPost
where dbo.TestPost.Appid = dbo.TblPrePostApproval.AppID),
dbo.TblPrePostApproval.PADisbBr = (select dbo.TestPost.PABr
from dbo.TestPost
where dbo.TestPost.Appid = dbo.TblPrePostApproval.AppID)
Where is my problem? Pls any one suggest me.
One of your subqueries (I guess on line 10) is returning more than one row, so it can't check to see if it equals anything, because it's a set, not a value. Just change your query to be more specific. Try adding LIMIT 0, 1 to the end of the subqueries, or TOP (1) after the the SELECT in each subquery.
Why don't you use JOINs for your update? Much easier to read and understand!
Query #1:
UPDATE ppa
SET
PAApprovedDate = info.AppRefDate,
PAApprovedTenor = '36',
PAApprovedAmt = info.AppReqeustAmt,
PADisbBr = info.AppSourceBrName
FROM
dbo.TblPrePostApproval ppa
INNER JOIN
dbo.TblMasterInfo.TblMasterInfo info ON info.Appid = ppa.Appid
Query #2:
UPDATE ppa
SET
PAApprovedDate = tp.PADate,
PAApprovedTenor = tp.PATenor,
PAApprovedAmt = tp.PAAmt,
PADisbBr = tp.PABr
FROM
dbo.TblPrePostApproval ppa
INNER JOIN
dbo.TestPost tp ON tp.Appid = ppa.AppID
Im using query in crystal report like:
if({?User Name}) <>"ALL"
then
{COMN_USER_RESP_LINK_T.APPL_USER_NAME}={?User Name}
else
{COMN_USER_RESP_LINK_T.APPL_USER_NAME} ={COMN_USER_RESP_LINK_T.APPL_USER_NAME}
and
{COMN_USER_RESP_LINK_T.ENABLED}="Y"
this is actual query in sql:
SELECT
C.APPL_USER_NAME,
A.RESP_NAME,
B.MENU_NAME,
B.DESCRIPTION,
B.MODULE_NAME,
C.APPL_RESP
FROM COMN_RESPONSIBILITY_T A,
COMN_RESP_MENU_LINK_T B,
COMN_USER_RESP_LINK_T C
WHERE A.COMP_CODE = B.COMP_CODE
AND B.COMP_CODE = C.COMP_CODE
AND C.COMP_CODE = A.COMP_CODE
AND A.RESP_NAME = B.RESP
AND C.APPL_RESP = A.RESP_NAME
AND B.ENABLED = 'Y'
AND C.APPL_USER_NAME = c.APPL_USER_NAME
CASE #ACCT_CODE_FROM
WHEN 'ALL' THEN C.APPL_USER_NAME
ELSE #ACCT_CODE_FROM
END
ORDER BY APPL_USER_NAME,
RESP_NAME
I should select user name in parameter field(?user name), if I select ALL then I have to show all records ({COMN_USER_RESP_LINK_T.APPL_USER_NAME})
is the above query correct?
I would probably rephrase that as something like:
SELECT C.APPL_USER_NAME, A.RESP_NAME, B.MENU_NAME, B.DESCRIPTION,
B.MODULE_NAME, C.APPL_RESP
FROM COMN_RESPONSIBILITY_T A
INNER JOIN COMN_RESP_MENU_LINK_T B ON A.COMP_CODE = B.COMP_CODE
AND A.RESP_NAME = B.RESP
INNER JOIN COMN_USER_RESP_LINK_T C ON B.COMP_CODE = C.COMP_CODE
AND C.APPL_RESP = A.RESP_NAME
WHERE ((#ACCT_CODE_FROM = 'ALL') AND (B.ENABLED = 'Y'))
OR (C.APPL_USER_NAME = #ACCT_CODE_FROM)
ORDER BY APPL_USER_NAME, RESP_NAME
This gets you the details for either:
when ALL is selected, all accounts that are enabled; or
just the user code entered
i don't read your code because it is very dirty! but i think you can use SelectionFormula in crystal report. Certainly you can set it in code :
crystalReportViewer1.SelectionFormula ="(({?User Name}= 'ALL') AND ({B.ENABLED} = 'Y'))
OR ({C.APPL_USER_NAME} = #ACCT_CODE_FROM)"