Im using query in crystal report like:
if({?User Name}) <>"ALL"
then
{COMN_USER_RESP_LINK_T.APPL_USER_NAME}={?User Name}
else
{COMN_USER_RESP_LINK_T.APPL_USER_NAME} ={COMN_USER_RESP_LINK_T.APPL_USER_NAME}
and
{COMN_USER_RESP_LINK_T.ENABLED}="Y"
this is actual query in sql:
SELECT
C.APPL_USER_NAME,
A.RESP_NAME,
B.MENU_NAME,
B.DESCRIPTION,
B.MODULE_NAME,
C.APPL_RESP
FROM COMN_RESPONSIBILITY_T A,
COMN_RESP_MENU_LINK_T B,
COMN_USER_RESP_LINK_T C
WHERE A.COMP_CODE = B.COMP_CODE
AND B.COMP_CODE = C.COMP_CODE
AND C.COMP_CODE = A.COMP_CODE
AND A.RESP_NAME = B.RESP
AND C.APPL_RESP = A.RESP_NAME
AND B.ENABLED = 'Y'
AND C.APPL_USER_NAME = c.APPL_USER_NAME
CASE #ACCT_CODE_FROM
WHEN 'ALL' THEN C.APPL_USER_NAME
ELSE #ACCT_CODE_FROM
END
ORDER BY APPL_USER_NAME,
RESP_NAME
I should select user name in parameter field(?user name), if I select ALL then I have to show all records ({COMN_USER_RESP_LINK_T.APPL_USER_NAME})
is the above query correct?
I would probably rephrase that as something like:
SELECT C.APPL_USER_NAME, A.RESP_NAME, B.MENU_NAME, B.DESCRIPTION,
B.MODULE_NAME, C.APPL_RESP
FROM COMN_RESPONSIBILITY_T A
INNER JOIN COMN_RESP_MENU_LINK_T B ON A.COMP_CODE = B.COMP_CODE
AND A.RESP_NAME = B.RESP
INNER JOIN COMN_USER_RESP_LINK_T C ON B.COMP_CODE = C.COMP_CODE
AND C.APPL_RESP = A.RESP_NAME
WHERE ((#ACCT_CODE_FROM = 'ALL') AND (B.ENABLED = 'Y'))
OR (C.APPL_USER_NAME = #ACCT_CODE_FROM)
ORDER BY APPL_USER_NAME, RESP_NAME
This gets you the details for either:
when ALL is selected, all accounts that are enabled; or
just the user code entered
i don't read your code because it is very dirty! but i think you can use SelectionFormula in crystal report. Certainly you can set it in code :
crystalReportViewer1.SelectionFormula ="(({?User Name}= 'ALL') AND ({B.ENABLED} = 'Y'))
OR ({C.APPL_USER_NAME} = #ACCT_CODE_FROM)"
Related
I would like to ask if it is possible to select again from a result set if a column contains a specific value?
For example, from the below query I want to select it as subquery and check if that subquery's first column contains both 2 and 3 result. Otherwise, no values should be return.
select e.evaluator_id, ROUND(avg(cast(e.rating_score as int))::numeric,1)::varchar, c.q_category_name
from tms.t_evaluation e
inner join tms.m_q_category c
on e.nendo=c.nendo
and e.q_category_id = c.q_category_id
and c.delete_flg = '0'
inner join tms.m_q_subcategory qs
on e.q_category_id = qs.q_category_id
and e.q_subcategory_id = qs.q_subcategory_id
and c.nendo = qs.nendo
and qs.delete_flg = '0'
where e.nendo = '2018'
and e.empl_id = 'empl05'
and e.delete_flg = '0'
and e.evaluator_id in ('2' , '3')
group by e.empl_id, e.nendo, e.q_category_id,
c.q_category_name, e.evaluator_id, e.history_no
Result contains both 2 and 3 in first column. Is this possible?
select e.evaluator_id, ROUND(avg(cast(e.rating_score as int))::numeric,1)::varchar, c.q_category_name
from tms.t_evaluation e
inner join tms.m_q_category c
on e.nendo=c.nendo
and e.q_category_id = c.q_category_id
and c.delete_flg = '0'
inner join tms.m_q_subcategory qs
on e.q_category_id = qs.q_category_id
and e.q_subcategory_id = qs.q_subcategory_id
and c.nendo = qs.nendo
and qs.delete_flg = '0'
where e.nendo = '2018'
and e.empl_id = 'empl05'
and e.delete_flg = '0'
and e.evaluator_id in (select case when evaluator_id=2 or evaluator_id=3 then evaluator_id else null from t_evaluation order by evaluator_id asc)
group by e.empl_id, e.nendo, e.q_category_id,
c.q_category_name, e.evaluator_id, e.history_no
I tried to update my table like below:
$query = "select *
FROM sites s, companies c, tests t
WHERE t.test_siteid = s.site_id
AND c.company_id = s.site_companyid
AND t.test_typeid = '20' AND s.site_id = '1337'";
$queryrow = $db->query($query);
$results = $queryrow->as_array();
foreach($results as $key=>$val){
$update = "update tests set test_typeid = ? , test_testtype = ? where test_siteid = ?";
$queryrow = $db->query($update,array('10','Meter Calibration Semi Annual',$val->site_id));
}
The above code is working good. But in update query , The column test_typeid is not updated with '10'. Column test_typeid is updating with empty value. Other columns are updating good. I dont know why this column test_typeid is not updating? And the column test_typeid type is integer only. I am using postgreSql
And My table definition is:
What i did wrong with the code. Kindly advice me on this.
Thanks in advance.
First, learn to use proper JOIN syntax. Never use commas in the FROM clause; always use proper explicit JOIN syntax.
You can write the query in one statement:
update tests t
set test_typeid = '10',
test_testtype = 'Meter Calibration Semi Annual'
from sites s join
companies c
on c.company_id = s.site_companyid
where t.test_siteid = s.site_id and
t.test_typeid = 20 and s.site_id = 1337;
I assume the ids are numbers, so there is no need to use single quotes for the comparisons.
I want to convert this query in yii
SELECT count(*) AS cnt, date(dt) FROM tbl_log where status=2 GROUP BY date(dt)
and fetch data from that. I try this command (dt is datetime field):
$criteria = new CDbCriteria();
$criteria->select = 'count(*) as cnt, date(dt)';
$criteria->group = 'date(dt)';
$criteria->condition = 'status= 2';
$visit_per_day = $this->findAll($criteria);
but no data will fetch!
wath can I do to get data?
Probably you see no data because you need assign data to model attributes which doesn't exist.
$criteria = new CDbCriteria();
$criteria->select = 'count(*) AS cnt, date(dt) AS dateVar';
$criteria->group = 'date(dt)';
$criteria->condition = 'status= 2';
$visit_per_day = $this->findAll($criteria);
This means that your model must have attributes cnt and dateVar in order to show your data. If you need custom query then check Hearaman's answer.
Try this below code
$logs = Yii::app()->db->createCommand()
->select('COUNT(*) as cnt')
->from('tbl_log') //Your Table name
->group('date')
->where('status=2') // Write your where condition here
->queryAll(); //Will get the all selected rows from table
Number of visitor are:
echo count($logs);
Apart from using cDbCriteria, to do the same check this link http://www.yiiframework.com/forum/index.php/topic/10662-count-on-a-findall-query/
If you use Yii2 and have a model based on table tbl_log, you can do it in model style like that:
$status = 2;
$result = Model::find()
->select('count(*) as cnt, date(dt)')
->groupBy('date(dt)')
->where('status = :status')
->params([':status' => $status ])
->all();
SELECT
nzy.NZPYYD
,nzy.NZZSYG
,nzy.NZJRYG
,acn.ANITCD
FROM
ACNTRA acn
LEFT OUTER JOIN NZYTFL nzy
ON (
nzy.NZCNO1 = acn.ANCNO1
AND nzy.NZCNO2 = acn.ANCNO2
AND nzy.NZCNO3 = acn.ANCNO3
AND nzy.NZCNO4 = acn.ANCNO4
AND nzy.NZCNO5 = acn.ANCNO5
AND nzy.NZSLKI = acn.ANSLKI
AND nzy.NZDLTM = ''
)
WHERE
acn.ANDLTM = ''
AND acn.ANTKCD = '1029'
AND nzy.NZTXKB = 1
The problem here is it gives 2 rows result.I want to get one unique row from the result of left outer join .Any help?
If both rows are identical, try
SELECT DISTINCT
nzy.NZPYYD
,nzy.NZZSYG
,nzy.NZJRYG
,acn.ANITCD
If not, you can try to SUM(), CONCAT(), MAX() or whatever the column with different values.
Difficult to be more precise without a sample output.
When I run the selects below, I do not get Field3 in the result set, why?
Select
a.Field1,
a.Field2,
a.Field3,
sum(IsNull(a.Field4, 0)) AS SomeAlias1,
a.SomeField5,
a.SomeField6,
a.SomeField7
From SomeTable a
INNER JOIN SomeView1 v on v.au = a.au
inner join (select Username, House from Users userBuildings where UserName = #UserName) as userHouses on userHouses.au = a.au
WHERE
(((where claus logic here....
Group BY a.Field1,
a.Field2,
a.SomeAlias1,
a.Field3,
a.Field4,
a.Field5,
a.Field6,
a.Fielf7
)
Select
transBudget.Field1,
transBudget.Field2,
transDiscount.Field4,
... some other fields...
IsNull(transDiscount.Actual, 0) - IsNull(transBudget.Actual, 0) AS Variance
from (Select * from Transactdions Where TransDesc = 'Budget') AS transBudget
FULL OUTER JOIN
(Select * from Transactions Where TransDesc = 'Discount') AS transDiscount
ON transBudget.Market = transDiscount.Market AND transBudget.SubMarket = transDiscount.SubMarket
I see every field except Field3 for some reason and it's beyond me how the heck this can happen.
In the second part of your query, you are missing field 3.
Select
transBudget.Field1,
transBudget.Field2,
transDiscount.Field4,
... some other fields...
IsNull(transDiscount.Actual, 0)
You appear to have two separate SQL queries there. The first one contains Field3, but the second one does not.