Using RAD 8.5/ClearCase 7.x, I checked out many files. I made my changes and was able to check many of the files back in (using the GUI RAD interface). However I'm unable to check in many other files by right-clicking on them in Eclipse. When I do right-click on them, the check-in & out options are disabled but the 'Add to source control' is enabled - RAD/CC react like these files are not in source control, but they've been controlled for many years. I am able to do a 'Find checkouts' (using RAD) and it lists those files. If I start up CC Explorer and check those files in my view, they show as 'View-private file'.
I've tried deleting one of these files via CC Explorer and then try to "re-add" it via the RAD GUI but I still get a generic error at that point that doesn't tell me anything.
How do I at a minimum get these files back in a state that I can check them out?
After working w/ our inhouse CC support staff, we've gone the route of them going in and undoing the check outs of the remaining files and then creating a new view. Then delete the "bad" view from my RAD workspace (as well as from the VOB) and import the new view. Because of additional CC plugin issues, we're also uninstalling RAD, WAS, and Clearcase to reinstall them. So this current situation is now closed.
I was facing the same issue in clear case view, this may not be the proper answer as I am not doing through eclipse, but it may help others. Solution was
Go to version tree of the file, right click on the checked-out node and there check in option was enabled.
Confluence version: 5.5.2.
I need to know how I can see the actual source code of a macro in Confluence. I tried adding macros, then right-clicking the page to view the source code, but that doesn't really help.
What I am trying to do:
With the existing macro, task list (the checkboxs), I need to modify the code in a way such that changing the value from true to false (pretty sure it is the onClick() function) or vice versa will send an e-mail to all "Watchers" of that page.
Would this even be possible? The changes I make need to be recognized on the server so that the changes don't only take place on my computer. Also, I don't even know if I can view the actual source without downloading an external plug-in (which won't work for certain reasons). Has anyone done something like this?
The source code for Confluence macros can be found either in the User Macro section of the Administration panel for inhouse macros or in the plugin code. The first port of call is bitbucket.org for Atlassian plugin code.
To view the code for Atlassian plugins you will need to access the source from Atlassian. E.g. Tasklist Plugin in BitBucket.
You can also download the jar installer for this plugin from the Atlassian Marketplace Dynamic Tasklist 2 page, change the extension from .jar to .zip and then unzip the plugin to view the plugin contents.
Found a work around. If you go into settings (under profile pic), then go to e-mail and select all the checkboxes provided, it will solve my problem. Any small cahnge made in the document will be e-mailed to all watchers.
I have read the other posts asking the same question but was unable to get my code to work. I have deleted my meta data and imported my files back in to no avail.
I have my workspace inside my dropbox folder to allow me to code from home or while away. Currently I am using my laptop which is not my primary coding machine. The project worked yesterday on this laptop however.
any help would be much obliged, I will provide any information that is required
First go to the Project menu and select "Clean...". That might solve it right off the bat.
If not, next you should right click on your "src" folder and select "Build Path" -> "Use as Source Folder". Then Clean again.
Try those two things and then report back with results.
Background: I am trying to use google analytics api's for java, to make their simple "helloAnalyticsApi" java code. But, I cannot even get past the basic steps of setting up eclipse and such.
Please see the link below:
https://code.google.com/p/google-api-java-client/wiki/Setup#google-api-client
In that link, they say:
Blockquote
Eclipse users will want to set the "Source attachment" for each class jar to its corresponding "-sources" jar
I dont know this means. Please tell me how to do what they say in the above sentence.
I tried a non-google tutorial, and it worked. But, when I try to make their sample java code, i get many errors which i mentioned in another post.
Thanks.
Download the API that is given.
Download the API that is given.
UNZIP the files in some directory
Make an eclipse Project say for example Analytics.
Goto the PROJECT tab click PROPERTIES and click on BUILD PATH
Click on ADD EXTERNAL JARS
Use the jars that you need for your project(Not all of them are REQUIRED).
you should be all set...
They have made simple steps really complicated by using the line
"Eclipse users will want to set the "Source attachment" for each class jar to its corresponding "-sources" jar..."
I have the (mis)fortune of having a large project source-base in which I am working primarily on PHP and JavaScript. I have to have the full project area as the project root in Eclipse, but unfortunately this includes several directories that drive the validation built into WST/DLTK/etc. nuts.
I have tried disabling all validators in the project properties. I have gone into the validators one at a time and added rules to the "Exclude Group" set to exclude the specific folders. I have removed the folders from the PHP build path in the project properties. And yet, my Problems view/tab is still littered with thousands of red flags that stem mostly from a folder that we use to keep copies of external elements (Apache, PHP, etc.). You know, typical "have a copy of the specific versions we currently use" sort of thing.
The signal-to-noise ratio is so bad that I'm unable to use the view at all, which is a shame. If I'm not going to have the benefits of the IDE, I might as well be using vim for this (I use it for other stuff, but for this codebase a good IDE is a better choice, providing I can get it to work). It seems to me that it would be an obvious feature to be able to right-click a folder in a project and select "Exclude from Validation", but alas there is no such feature. Is there another way to get the validators (PHP, HTML, etc.) to ignore the folders I need ignored?
Tried solution;
Right click project
Select properties
Select validation
Check Enable Project specific settings
On the XML Validator row, click the '...' button
Select Exclude Gruop
Click Add rule
Select 'Folder or file name'
Click Next
Select files or folder which are not validated.
Click Finish
Click OK
Click OK
This solved my problem. Because eclipse validation gives error for generated GWT files.
Best regards.
I came upon this question while looking for the same answer. I will list the steps I did here and hopefully it will help someone in the future.
I am using Eclipse 4.1 and I do the following to exclude validation for specific xml files. I am sure if you configure the different validators it will work for other files as well.
Go to Preferences -> Validation
Find the Validator you wish to change and select settings (not all of the validators have settings, hopefully yours do).
In the settings you can add an Exclude Group where you can add a rule to specify to exclude the validator for specific extensions, folder or file name, project nature, facet or content type.
I have Eclipse for PHP Developers and I was dealing with the same issue.
In addition tot he excellent answers above, I have one more suggestion.
My first recommendation is not to use Aptana unless you actually want those validators (as they are nearly impossible to turn off from my experience).
Beyond that, go to File -> Properties -> Builders, and deselect "Validation" and "Script Builder" and "JavaScript Validator".
So far it's helped speed up some operations tremendously.
I also recommend disabling "Automatic Build". Because you're using PHP, the odds that you actually need it to build anything if you don't want validation is slim.
In the main menu, go to Project and uncheck "Build Automatically". You will want to build your project every now and then by right clicking on the project and selecting "Build Project".
All the above steps have helped me get the basic editor, which is exactly what I wanted.
I used to exclude resources from validation via project specific Exclude Group (as the most answer here suggests). But in case anyone is still having problems with disabling validation for a specified folder in 2014 - just mark the folder resource as Derived:
This should disable validation for that folder.
If you are using EGIT you might also want to disable automatic inclusion of derived resources in .gitignore:
It is not really possible to select a directory, at least under Windows.
After having pressed Preferences->Validation->Settings->Add Exclude Group->Add Rule->Folder or filename->Browse Folder->(selecting some directory)->[OK]
The "Browse for folder" dialog is being closed, with the "File or folder" field staying empty.
I had the same problem with the web app i'm developping.
I ended up disabling automatic build, and building once a day (Project->Build automatically), that way i still get the benefits of code completion from libraries, while speeding up the program on older computers.
I found in the project properties there is a Builders category. In the list of builders I had a JavaScript Builder. I deselected this builder and all my annoying javascript validation woes went away.
this worked for me:
Properties > Builders section and unchecking the corresponding box. https://bugs.eclipse.org/bugs/show_bug.cgi?id=317833
seems to be a bug in some versions of eclipse.
There are more gloabal validation parameters. You can suspend all validation (or only the ones you don't need) by going to:
Window > Preferences > Validation.
Here, check the box "Suspend all validators".
Alternatively, uncheck the validators you don't need from the list below.
A full build will be requested which might take some time. But Eclipse will run a lot faster afterwards [But without validation of course]
http://www.flickr.com/photos/jesuspresley/5094048124/
Solution.
Go configure what's displayed in the Problems View like lothar proposed, create new custom filter and in "Scope" area choose "On working set". Now press the button right below this option to configure what working set would it be: in working set selection pop-up hit the "New" button and mark all your project files EXCEPT those you want to exclude from validation. You might want to save this working set under convenient name, like "No_Validation_Set".
Summary:
1) working set excluding problematic files.
2) custom Problems View filter to operate on this set.
Issues:
when adding new files to project you need to update your working set, so they are validated too.
When I excluded files from validation for the project, my setting didn't seem to be recognised until I restarted Eclipse and cleaned the project.