I have the (mis)fortune of having a large project source-base in which I am working primarily on PHP and JavaScript. I have to have the full project area as the project root in Eclipse, but unfortunately this includes several directories that drive the validation built into WST/DLTK/etc. nuts.
I have tried disabling all validators in the project properties. I have gone into the validators one at a time and added rules to the "Exclude Group" set to exclude the specific folders. I have removed the folders from the PHP build path in the project properties. And yet, my Problems view/tab is still littered with thousands of red flags that stem mostly from a folder that we use to keep copies of external elements (Apache, PHP, etc.). You know, typical "have a copy of the specific versions we currently use" sort of thing.
The signal-to-noise ratio is so bad that I'm unable to use the view at all, which is a shame. If I'm not going to have the benefits of the IDE, I might as well be using vim for this (I use it for other stuff, but for this codebase a good IDE is a better choice, providing I can get it to work). It seems to me that it would be an obvious feature to be able to right-click a folder in a project and select "Exclude from Validation", but alas there is no such feature. Is there another way to get the validators (PHP, HTML, etc.) to ignore the folders I need ignored?
Tried solution;
Right click project
Select properties
Select validation
Check Enable Project specific settings
On the XML Validator row, click the '...' button
Select Exclude Gruop
Click Add rule
Select 'Folder or file name'
Click Next
Select files or folder which are not validated.
Click Finish
Click OK
Click OK
This solved my problem. Because eclipse validation gives error for generated GWT files.
Best regards.
I came upon this question while looking for the same answer. I will list the steps I did here and hopefully it will help someone in the future.
I am using Eclipse 4.1 and I do the following to exclude validation for specific xml files. I am sure if you configure the different validators it will work for other files as well.
Go to Preferences -> Validation
Find the Validator you wish to change and select settings (not all of the validators have settings, hopefully yours do).
In the settings you can add an Exclude Group where you can add a rule to specify to exclude the validator for specific extensions, folder or file name, project nature, facet or content type.
I have Eclipse for PHP Developers and I was dealing with the same issue.
In addition tot he excellent answers above, I have one more suggestion.
My first recommendation is not to use Aptana unless you actually want those validators (as they are nearly impossible to turn off from my experience).
Beyond that, go to File -> Properties -> Builders, and deselect "Validation" and "Script Builder" and "JavaScript Validator".
So far it's helped speed up some operations tremendously.
I also recommend disabling "Automatic Build". Because you're using PHP, the odds that you actually need it to build anything if you don't want validation is slim.
In the main menu, go to Project and uncheck "Build Automatically". You will want to build your project every now and then by right clicking on the project and selecting "Build Project".
All the above steps have helped me get the basic editor, which is exactly what I wanted.
I used to exclude resources from validation via project specific Exclude Group (as the most answer here suggests). But in case anyone is still having problems with disabling validation for a specified folder in 2014 - just mark the folder resource as Derived:
This should disable validation for that folder.
If you are using EGIT you might also want to disable automatic inclusion of derived resources in .gitignore:
It is not really possible to select a directory, at least under Windows.
After having pressed Preferences->Validation->Settings->Add Exclude Group->Add Rule->Folder or filename->Browse Folder->(selecting some directory)->[OK]
The "Browse for folder" dialog is being closed, with the "File or folder" field staying empty.
I had the same problem with the web app i'm developping.
I ended up disabling automatic build, and building once a day (Project->Build automatically), that way i still get the benefits of code completion from libraries, while speeding up the program on older computers.
I found in the project properties there is a Builders category. In the list of builders I had a JavaScript Builder. I deselected this builder and all my annoying javascript validation woes went away.
this worked for me:
Properties > Builders section and unchecking the corresponding box. https://bugs.eclipse.org/bugs/show_bug.cgi?id=317833
seems to be a bug in some versions of eclipse.
There are more gloabal validation parameters. You can suspend all validation (or only the ones you don't need) by going to:
Window > Preferences > Validation.
Here, check the box "Suspend all validators".
Alternatively, uncheck the validators you don't need from the list below.
A full build will be requested which might take some time. But Eclipse will run a lot faster afterwards [But without validation of course]
http://www.flickr.com/photos/jesuspresley/5094048124/
Solution.
Go configure what's displayed in the Problems View like lothar proposed, create new custom filter and in "Scope" area choose "On working set". Now press the button right below this option to configure what working set would it be: in working set selection pop-up hit the "New" button and mark all your project files EXCEPT those you want to exclude from validation. You might want to save this working set under convenient name, like "No_Validation_Set".
Summary:
1) working set excluding problematic files.
2) custom Problems View filter to operate on this set.
Issues:
when adding new files to project you need to update your working set, so they are validated too.
When I excluded files from validation for the project, my setting didn't seem to be recognised until I restarted Eclipse and cleaned the project.
Related
I have a custom build-script for my site. I want to invoke this script whenever I press ctrl+b in eclipse.
I have configured a new builder seen at the top. While my own builder runs fine, eclipse also invokes "Validation" and "Script Builder". As far as I can tell these two do absolutely nothing, but take ages to complete.
I have tried to simply disable them, but eclipse just creates them again as another instance. (hence the duplicates)
I have tried to add an exclusion to * for the PHP Build Path, but that didn't do anything.
What do "Validation" and "Script Builder" do exactly? Why do they take so long and above all: how can I disable them?
The fact that these two builders are re-added after you disable them is a bug. Please file bug reports at bugs.eclipse.org. You will need to file separate bug reports as these two builders are maintained by different groups of people.
The Validation builder performs a variety of validation on artifacts in your project. You can see all validation that's performed under Validation property page in the same dialog. In that page, you can selectively disable the categories of validation that you don't want.
The Script Builder comes from PDT and presumably performs validation on the actual PHP artifacts. Outside of what you've already tried, I don't know of a way to disable it.
2 years later and I have the exact same problem with latest PDT.
This is what I did:
Validations:
Right-click project
Properties
Validation
Click checkbox "Enable project specific settings"
Click checkbox "Suspend all validators"
Script Builder:
Right-click project
Properties-
PHP Build Path
remove all folders from "Source folders on build path:"
or remove all but the ones you really want to be checked for syntax errors
Now "build" phase of PHP project is way shorter (like a half a second :)))
However, if you want to be able to navigate PHP source using Eclipse (like right-click on function and select "Open declaration" or pressing F3 on function name) then you need to leave folders in Script Builder with source you want to navigate. I had project with huge folders containing source of various frameworks and I removed those from "Source folders on build path:" and only left folder(s) with project source. That cut down build time to second or so.
The Eclipse content assist for PHP (and I'm assuming for other types as well) isn't using the currently active working set - it's searching ALL files in the project. How do I change it to only use the active working set?
When doing a Ctrl+Shift+R search, it was also looking for all files in the project (not what I wanted), until I clicked the small black triangle in that window and selected the working set I wanted it to use. Now it successfully only shows the files that match my search string in the working set. However, this doesn't change anything in the autocomplete content assist feature (i.e. doing a Ctrl+Space to complete the name of a function or variable). Is there any way to accomplish this?
I'm using Eclipse Indigo release, so it's very recent.
I'm afraid it's not possible the way you put it. Eclipse Working Sets just give you a way to organize your projects.
However you may want to take a look at Mylyn, which is fully integrated with Eclipse platform. Here and here is a nice overview of what you can do with Mylyn. But briefly, what it allows you to do is to create a task and maintain a context associated with it. This way, only the relevant files will be displayed in Project Explorer and autocomplete would suggest you only task-focused options.
Is there any way to specify a project, where you want to search?
It's been annoying me for a long time. Like when I hit Ctrl+H to search, the only scopes available are:
Workspace
Selected resources
Enclosing projects
Working set
So, the only 3 ways I see to perform a search in particular projects are:
Open a file from the required project, hit Ctrl+H and choose Enclosing projects scope
Add required project to Working set, and perform search on this set.
Select a project in Project Explorer and search in Selected resources
All of these methods are not always convenient.
Sometimes, I just want to manually specify projects, where the search is to be performed
Edit:
The last option is not good for 2 reasons:
1) I usually have "Link with editor" option on, which associates currently opened file with corresponding item in Project Explorer. Our project is quite large, so usually I would have to scroll all the way up to collapse the selected project to make others visible.
2) Also, Project Explorer is not reachable when I'm working in another perspective, such as Debug for example (I know I can add it through Window->Show View, but that just breaks the essence of perspectives).
I am using the most excellent ant/bin/complete-ant-cmd.pl for bash completion of ant targets and it caches its results in a file called .ant-targets-build.xml. The problem is, in my eclipse project, eclipse is a little overaggressive validating everything it believes is actually XML (which .ant-targets-build.xml isn't...its just the raw targets separated by newlines).
How do I get eclipse to relax its restrictions and treat .ant-targets-build.xml as NOT an xml file...just text or something.
Project->Properties
Check Enable project specific settings.
Click ellipsis next to XML Validator
Click on Exclude Group
Click on Add Rule
Follow wizard and create File exclusion.
One of the most annoying "features" of this dialog is that you cannot edit existing rules. If you make a mistake you will need to delete that rule and recreate it from scratch.
BTW, in your case it may be preferable to create a global workspace rule ( I usually like to keep special cases with the project ).
In any case after you finished with rule creation, right-click on a project with warnings and choose Validate. This will clear these warnings
If you decided to edit validation preferences in project and not in workspace, then add project-name/.setting/org.eclipse.wst.validation.prefs file to source control.
I have a project containing at least one DLL along with the executable output. I have added a Deployment Project to this solution, which asked me for a name and working directory upon creation like all projects.
I named this "MyProduc_Installer" and have been able to modify all aspects of the installation process except for changing the name of the installer itself. Throughout the install process, the user sees messages like "Welcome to the MyProduct_Installer Installer." Even in the Add/Remove Programs list, this is the application's ill conceived title.
How do I change this setting? I have tried right click/properties, as well as all the View options. I couldn't find anything in the assembly information for the executable project, or solution properties.
I have tried right-clicking on the project in the Explorer to change the properties, but here is what I see:
There is no setting here to change the project title.
If you haven't found the answer to this yet, here is the answer.
Visual Studio has 2 sets of properties for Projects -
1 which you can accesss by selecting the Project in Solution Explorer and then right clicking and selecting 'Properties'.
2nd set of properties is in the 'Properies' window which shows up below the Solution explorer. This is the same property window which is displayed for any of the Form property settings or any other control settings.
The 'Product Name' and other project properties for 'Setup' project can be found in the second property window.
Hope this helps.
AC
The easy way to get to the properties you are interested in is to use the F4 shortcut when the project is highlighted. As stated in previous posts this is a very different list to the one you get by right click and selecting properties.
If you mean a Setup project like for winforms, it's the ProductName property. In Studio, I just click on the project name in the Explorer and I get the property window typical to other projects, and it's right there. Other properties include the AddRemoveProgramsIcon, InstallAllUsers, and RemovePreviousVersions.
I happened across this post, where I was having trouble renaming the Product as well.. In regards to using Click Once Publishing.
Since updating all the old names I couldn't get the Publishing to correct itself.
It was found notepading the project file xyz.vbproj in my case and updating the <ProductName>xyz wrong name</ProductName> element that was still wrong.
It was the only place I could find to update it, since the publishing or any property window didn't expose this.