I do not know if this is a bug or rather stems from any customizations. I would like to know how to tackle this problem:
If I click on "add image" or "Link" in Plone's "Content Browser" the default view mode is "Album". In this mode the items are layed above each other, i.e. after 4 items the next items do not seem to be put into a new column.
See the screenshot:
Plone version is 4.3.2. How can I fix this? Pointers (relevant files, parts of code) welcome.
I have seen this happen too, depending on what I did with styling and skins. TinyMCE uses a grid system for showing these images and this needs the columns.css file from plonetheme.sunburst. I only now realize that this actually already goes wrong in the way you describe when you use standard Plone 4.3.2 and choose the classic theme as skin.
Ah, but it only fails because there is a typo in the columns.css that is shipped with plonetheme.classic, which actually includes the grid css as well. You can customize this file in portal_skins and fix the error. The problem is a line that is meant as a comment.
Change this line:
The 16-column Deco Grid System.
into this line:
/* The 16-column Deco Grid System.
Related
I have a document-level (dotx) customization, with a custom ribbon, and one of the controls in that ribbon is this:
<gallery idMso="CustomGallery1" label="Building Blocks" size="large" />
The only other part that makes this work is the creation of entries under Custom1 in the Building Blocks Organizer. In Word 2010, this would show all the building blocks under the Custom1 category. In Word 2013, it shows the name of each building block briefly, and then all of them are removed and the list is empty:
The building blocks themselves all contain either a document property or document variable.
I have tried the following to resolve this but without success:
Ensured that they are still present by opening the template outside of Visual Studio; they are.
Upgraded the template to the 2013 dotx format.
Re-created the building blocks.
Re-created the entire dotx file, and then re-created the building blocks.
I also tried using other ribbon IDs, they are empty too (they do all have entries) but they display it differently:
There should be four entries there, they exist in my Normal.dotm. The last two controls there, for equations and content controls, do work, except the content control that is inserted displays similar behavior as the Autotext gallery:
I don't know what should be shown in this case but I doubt it's nothing.
Right now I'm assuming that this is just a broken feature in 2013 and will have to replace it with something else. Does anyone know anything to the contrary?
I don't think it is a broken feature, after some struggle, I did get to understand how to use it:
The gallery button in the "toolbar" of a newly added Building Block Gallery Content Control indeed seems empty at first, because it is set to list QuickParts. You have to change it in the properties of the control so that it lists the content of the AutoText Gallery instead (or any other Gallery of Building Blocks you'd like). To do so, either directly click on the Properties button in the Developper tab while the control is selected, or switch to Design Mode so that the Properties appears in the context menu (right-click on the control):
AutoText is "Insertion automatique" in French, the rest you can guess ;)
As far as I could find, it's just a broken feature. There's also a ridiculous memory leak the first time you do a Find and add fields during that find.
I'd like to create a custom drag and drop template so I can increase the design possibilities without losing the functionality. I can't find anything in their documentation.
I was hoping to create something like this, not sure if I'm missing something obvious but I can't find a drag and drop that allows for the different coloured background with columns too.
I could use a block of code but I can't edit the css styles so it wouldn't be responsive for mobile and also not very friendly for those who don't know html.
Rather old question, but to who it might be helpfull:
If you code your own template and upload it to Mailchimp you lose the 'drag & drop' system/UX interface with the different blocks. You are able to create repeatable blocks but then it works with a dropdown list. This is (in my humble opinion) not that user friendly and takes a while before you fully understand how to use the dropdown. I had to explain it to a client earlier today and took a while before they understood it, so I decided to write them a manual for it.
But the design you want to create should be possible to make with a standard MC template. In the 'design' tab you will find settings to control background colors etc.
Still not possible, answer from the Mailchimp support: "At the moment, it's not currently possible to code a drag and drop template completely--one of our drag and drop template layouts will need to be selected, but you can drop in Code blocks to get a little more control over the styling of certain sections."
Though, if it's any help, it is possible to fully custom code your own template, and then add in mailchimps special Template language to the template to open up sections as editable within the campaign builder--or even duplicate certain sections of content. It's not quite the same as the drag drop templates, but adds similar functionality. More info on working with template language can be found here: https://mailchimp.com/help/getting-started-with-mailchimps-template-language/
I know this is an old question, but while searching for this myself I stumbled upon a solution posted here.
Basically it is possible to code your own drag n' drop template, but the solution has not been documented.
Find one of the Mailchimp templates (either one of the basic templates or a custom template from the 'Themes' menu.
Use 'Inspect element' and copy the source code of the iFramed html-email.
Paste in your preferred HTML-editor and modify as intended
Create your own template from the 'Paste in code' mode
If you want custom modules to be added by default, edit using the menu 'Edit design' in the bottom of the screen.
Save and exit :)
I found part of the answer on another topic: [Is it possible to code drag&drop templates for mailchimp?
If you add the following code into your main content div or td it will enable the drag and drop block editor:
mc:container="body_container" mccontainer="body_container"
example:
<div mc:container="body_container" mccontainer="body_container"></div>
This code will add a block editor region to the preheader section:
mc:container="preheader_container" mccontainer="preheader_container"
For the header:
mc:container="header_container" mccontainer="header_container"
For the footer:
mc:container="footer_container" mccontainer="footer_container"
Note: It doesn't seem to matter what you call the mc:container. Creating a new container with a different name worked. Although using just mc:container tag seems to work at first by itself, the mccontainer (no colon) tag is required for it to save properly.
You can create your own drag and drop template you need to add the following into your html coded template where you want the 'drag and drop' feature to exist.
<div id="templateBody" mc:container="container_name" mccontainer="container_name" class="tpl-container">
<div mc:block="3502204" mc:blocktype="text" mcblock="3502204" mcblocktype="text" class="tpl-block"></div>
</div>
This can be repeated in your code multiple times for multiple insertions. I could not find documentation to indicate if the container name or block number needs to be unique, I did make it unique in my template.
Two questions and maybe they are caused by the same thing/setting.
Using TinyMCE with full corporate account. Many of the publishers are just pasting HTML into the HTML Source Editor... we are just getting this going the results are very mixed.
So if someone has a well coded page it works well - as far as we think.
But if you create a page with a couple of (or one) open div tag. Holy cow! The editor can throw divs everywhere - 30 extra on one page someone sent me. Why is the editor changing content? Can we keep this from happening? If a publisher makes an HTML mistake we would rather that the mistake shows - not be scrubbed.
Also I noticed myself when creating menus that if you put in anything inside a link tag (like a div, ul, li, dd, dt, dl, h1-6... pretty much any tag) other than a span, that the editor will either push the tag content outside of the link tag or it will change the tag to a span.
http://www.tinymce.com/wiki.php/Configuration:Cleanup/Output
Looks like the verify html is the new setting. Will report back after testing.
David - I would have marked yours as right if you answered. Looks like that works for 3.4 and below.
For version 3, use
verify_html : false
From here http://archive.tinymce.com/wiki.php/Configuration3x:verify_html
im working on a CMS it is almost finished
but im struggling serious unfamiliar problems in WYSIWYG editor.
i was first using ckeditor but after experiencing problems with it i switched to tinymce.
some problems are solved but this time someother problems showed up.
problems occuring especially on tables.
1-Anchor element underline removal not working
2-Duplicating Phone numbers
--->might be due to skype phone number converting toolbar
3-too many s how to clean those why even those are there?
4-how to convert
<p>text</p>
back into just
text
because tinymce converting some texts into p element *automatically if it's not the client doing it unknowingly.
*=even though i did that force_paragraph:false setting.
5-As client reports : sometimes cursor turns into loading cursor and wysiwyg editor causes browser to stuck.not even allowing to click links outside of the editor.
6-as i experience sometimes it really does stuck and not allow you to edit anything at all.
here is that problematic page created with tiny_mce and causing lots of errors in process of editing:
Here some answers
2-Duplicating Phone numbers --->might be due to skype phone number converting toolbar
Might be - this cannot ba a tinymce related problem.
3-too many & nbsp;s how to clean those why even those are there?
Browsers will show several spaces (character code 32) as a single one. Thus & nbsp;s are inserted alternating instead of natural spaces.
4-how to convert
text
back into just text
Tinymce is a rte editor and will generate html code. In order to be able to style editor content, the content need to be wrapped inside a block element - eighter ps or divs. You may use server side code to remove tags.
6-as i experience sometimes it really does stuck and not allow you to edit anything at all.
Please describe a bit more in detail - there needs to be a reason for this.
I have a basic GWT Maven project going. I added SmartGWT and started playing around with some widgets and nothing displays correctly. The ListGrid seems to somewhat render but things are off and even data isnt showing up (though the rows respond to indicate there is data within the row). Sorting arrows dont appear but are clickable, and filters are wildy off. Whats causing this. I deleted everything in the .css file.
GWT newbie here.
Did you add the following to your host html file?
var isomorphicDir = "MODULE_NAME/sc/";
where MODULE_NAME is the name of your GWT module. ie the name you have in your GWT module xml file.
See http://forums.smartclient.com/showthread.php?t=8159#aImages
fyi the next release of Smart GWT will no longer require users to add the isomorphicDir variable to the host html file.