I'd like to create a custom drag and drop template so I can increase the design possibilities without losing the functionality. I can't find anything in their documentation.
I was hoping to create something like this, not sure if I'm missing something obvious but I can't find a drag and drop that allows for the different coloured background with columns too.
I could use a block of code but I can't edit the css styles so it wouldn't be responsive for mobile and also not very friendly for those who don't know html.
Rather old question, but to who it might be helpfull:
If you code your own template and upload it to Mailchimp you lose the 'drag & drop' system/UX interface with the different blocks. You are able to create repeatable blocks but then it works with a dropdown list. This is (in my humble opinion) not that user friendly and takes a while before you fully understand how to use the dropdown. I had to explain it to a client earlier today and took a while before they understood it, so I decided to write them a manual for it.
But the design you want to create should be possible to make with a standard MC template. In the 'design' tab you will find settings to control background colors etc.
Still not possible, answer from the Mailchimp support: "At the moment, it's not currently possible to code a drag and drop template completely--one of our drag and drop template layouts will need to be selected, but you can drop in Code blocks to get a little more control over the styling of certain sections."
Though, if it's any help, it is possible to fully custom code your own template, and then add in mailchimps special Template language to the template to open up sections as editable within the campaign builder--or even duplicate certain sections of content. It's not quite the same as the drag drop templates, but adds similar functionality. More info on working with template language can be found here: https://mailchimp.com/help/getting-started-with-mailchimps-template-language/
I know this is an old question, but while searching for this myself I stumbled upon a solution posted here.
Basically it is possible to code your own drag n' drop template, but the solution has not been documented.
Find one of the Mailchimp templates (either one of the basic templates or a custom template from the 'Themes' menu.
Use 'Inspect element' and copy the source code of the iFramed html-email.
Paste in your preferred HTML-editor and modify as intended
Create your own template from the 'Paste in code' mode
If you want custom modules to be added by default, edit using the menu 'Edit design' in the bottom of the screen.
Save and exit :)
I found part of the answer on another topic: [Is it possible to code drag&drop templates for mailchimp?
If you add the following code into your main content div or td it will enable the drag and drop block editor:
mc:container="body_container" mccontainer="body_container"
example:
<div mc:container="body_container" mccontainer="body_container"></div>
This code will add a block editor region to the preheader section:
mc:container="preheader_container" mccontainer="preheader_container"
For the header:
mc:container="header_container" mccontainer="header_container"
For the footer:
mc:container="footer_container" mccontainer="footer_container"
Note: It doesn't seem to matter what you call the mc:container. Creating a new container with a different name worked. Although using just mc:container tag seems to work at first by itself, the mccontainer (no colon) tag is required for it to save properly.
You can create your own drag and drop template you need to add the following into your html coded template where you want the 'drag and drop' feature to exist.
<div id="templateBody" mc:container="container_name" mccontainer="container_name" class="tpl-container">
<div mc:block="3502204" mc:blocktype="text" mcblock="3502204" mcblocktype="text" class="tpl-block"></div>
</div>
This can be repeated in your code multiple times for multiple insertions. I could not find documentation to indicate if the container name or block number needs to be unique, I did make it unique in my template.
Related
I have a document-level (dotx) customization, with a custom ribbon, and one of the controls in that ribbon is this:
<gallery idMso="CustomGallery1" label="Building Blocks" size="large" />
The only other part that makes this work is the creation of entries under Custom1 in the Building Blocks Organizer. In Word 2010, this would show all the building blocks under the Custom1 category. In Word 2013, it shows the name of each building block briefly, and then all of them are removed and the list is empty:
The building blocks themselves all contain either a document property or document variable.
I have tried the following to resolve this but without success:
Ensured that they are still present by opening the template outside of Visual Studio; they are.
Upgraded the template to the 2013 dotx format.
Re-created the building blocks.
Re-created the entire dotx file, and then re-created the building blocks.
I also tried using other ribbon IDs, they are empty too (they do all have entries) but they display it differently:
There should be four entries there, they exist in my Normal.dotm. The last two controls there, for equations and content controls, do work, except the content control that is inserted displays similar behavior as the Autotext gallery:
I don't know what should be shown in this case but I doubt it's nothing.
Right now I'm assuming that this is just a broken feature in 2013 and will have to replace it with something else. Does anyone know anything to the contrary?
I don't think it is a broken feature, after some struggle, I did get to understand how to use it:
The gallery button in the "toolbar" of a newly added Building Block Gallery Content Control indeed seems empty at first, because it is set to list QuickParts. You have to change it in the properties of the control so that it lists the content of the AutoText Gallery instead (or any other Gallery of Building Blocks you'd like). To do so, either directly click on the Properties button in the Developper tab while the control is selected, or switch to Design Mode so that the Properties appears in the context menu (right-click on the control):
AutoText is "Insertion automatique" in French, the rest you can guess ;)
As far as I could find, it's just a broken feature. There's also a ridiculous memory leak the first time you do a Find and add fields during that find.
So, I'm new to TYPO3. I worked myself through some guides and documentations to be able to create custom content elements on my own.
Now, for one of my desired content elements, I need to have a set of fields I want to be able to make repeatable, since I want to leave the choice up to the editor, how many of the sets he wants to add.
I'm running on TYPO3 version 7.6
I have already seen both options in existing content elements:
Content elements that work like a wrapper where you can add additional content elements within and
Content elements where you can add fieldsets within its configuration.
I'm searching for examples or written guides to recreate this, since I can't figure it out from the source code of those examples I've seen.
Edit(27.12.16):
So after seeing a few reactions and replies, I want to further clarify what I'm looking for.
I do NOT need an assistant plugin to create new content elements, I'm already past that.
Let me draw an example, to better describe what I want to achieve.
I do already have a working Content Element.
I have defined a set of fields (for example name & phone) shown in the TYPO3 backend. Now I want to leave the choice to the editor, if he just wants one set of 'name & phone' fields, or 2, or 8.
Therefore I want to create a '+'-button or something like that, for the editor to click on to make a new input set of 'name & phone'-inputs.
There is an extension called mask, with that you can simply click together your own content element with many different kinds of relations and fields.
Then there is a second extension mask_export that exports your new content elements into an own extension.
With those you can just create a very basic content element
export it
see what code was generated
add more to your content element
export it
check the code
and so on :-)
im working with Claus' Fluid Powered TYPO3 and I'm quiet happy with it. At the moment I have to implement a template wich should contain another extension (e.g. news) in the sidebar.
What is the preferred way to implement this.
My idea was to add the f:cObject ViewHelper and insert the extension in that way.
Is this the correct approach?
Thx
Markus
This depends on the type of template you are building:
Page templates should have proper content areas into which you can insert content. If the content needs to be shared, you have a few options: a) create the element in a sys folder and reference it from your Flux form settings then use v:content.render to render it by UID. b) Place any number of shared elements in a sys folder and render all by PID. c) Use content sliding in a column in your template which is there in all templates and is designed to contain elements which "slide" to every subpage (and can also be edited on subpages if editor has access).
Content templates can use flux:grid with flux:form.column, or flux:form.content as a shortcut to quickly make a single column, to add a content area, then flux:content.render to render those elements. This allows you to control that gets rendered around the plugin.
Plugin templates can associate a Flux form and use the steps described in point 2.
I think you're looking for 1a) or 1c) in this case.
There's a module to do this in Drupal land, but I've been frustrated with the hacks that've been necessary in Wygwam. What is the best way to go about implementing this in such a way that you don't need to totally override the default image handling in ChannelImages/Wygwam?
Assets is a good suggestion, but I believe Devdemon's channel images might be a better fit for the workflow you're suggesting.
http://www.devdemon.com/channel_images/
Clients can add (and see) a caption and more and it's fully integrated with Wygwam and other editors. Devdemon's support is also excellent.
The Assets module from Pixel & Tonic allows you to double-click on the image (or any other file) and add metadata. You then have access to the metadata in your templates.
Check the screenshot: http://pixelandtonic.com/assets
You can also add metadata using the native File Manager. Click the edit icon from the File Manager and you'll see a few fields. You can use the File Entries tag to access it.
http://expressionengine.com/user_guide/modules/file/file_tag.html
I typically use Matrix with one column for the image, one column for the caption, and if a link is needed another column for the link. This of course works best if the image is in a fixed location within your template.
On possible way to accomplish this that I have used is to run some jQuery that looks for images within a certain area, and if they have alt attributes, rewrite the image tag within a tag with a tag inside.
so:
jQuery(document).ready(function() {
$('#page-content > .wrapper img').each(function(){
if($(this).attr('alt') !== undefined && $(this).attr('alt').length > 0){
if(!$(this).parent().hasClass('content-image')){
$(this).replaceWith("<figure class='content-image "+$(this).attr('class')+"'>"+$($('<div></div>').html($(this).clone().attr('class',''))).html()+"<figcaption>"+$(this).attr('alt')+"</figcaption></figure>");
}
}
});
});
will do just that. It's looking within a #page-content div for img tags with alt attributes. And then rewriting it as
<figure><img src='....' .... /><figcaption>This is the text that was in the alt attribute</figcaption></figure>
Soooo, that kinda works. The only caveat is that you had better not use any double-quotes within your alt text, or it will break thangs. Not the cleanest of solutions, but a solution, nonetheless.
The object is to Show-Hide text located under their respective Titles, so a User reads the title and shows or hides text belonging to that title if the User wants to read more.
I tried whatever I could find so far on here, we're talking dynamically setting text coming from a spreadsheet, can't use IDs, must work with .class, must be missing something, I have this piece of code:
... html.push('<div class="comments">' + comment + '</div></div></div>');
but when I try this Show-Hide code nothing happens, even if the error console shows nothing. Basically I want to Show-Hide the .comments class divs with a show-hide toggle link located under each of them. I say them because the .comments divs are reproduced dynamically while extracting text coming from Google spreadsheet cells/row (one .comments div per spreadsheet row). I tried .next, child and parent but they all divorced me so I dunno looks like a dynamic issue. So far I only managed to globally toggle all divs to a visible or hidden state but I need to toggle independantly individual divs.
I prefer a jQuery solution but whatever worked so far was achieved with native javascript.
Note: If a cross-browser truncate function which would append a more-less link after a number of words (var) in each .comments divs would be easier to implement then I would gladly take that option. Thx for any help, remember I am still learning lol!
I have been working on an entirely JS UI project and have brought myself to using $('', { properties }).appendTo(BaseElement) to work best for adding HTML elements because it appropriately manipulates the DOM every time.
If you are having good luck with push elsewhere, however, breakpointing on the line where you do your $('.class').hide() and see what $('.class').length is. Alternately, you can just add alert($('.class').length) to your code if you are unable to breakpoint the code. If it is 0, then your elements have not been properly added to the DOM. Changing to append will ensure they are part of the DOM and therefore targetable via JQuery.