I generally don't use Eclipse, so perhaps I'm doing something wrong, but I've spent several hours going over this and can't find a problem.
I needed a plugin for Eclipse (PigEditor or PigPen) and attempted to install it via repository, this failed with the error below. When it wouldn't install, I downloaded the .zip version, extracted the archive, found the folder containing features and plugins directory and tried installing it. This also failed. I also tried a PigPen .jar and it wasn't picked up at all when placing it into the plugins folder.
I noticed along the way that I received a bunch of error messages where it looked like Eclipse was trying to fetch dependencies. For example...
Error
Unable to read repository at http://download.eclipse.org/eclipse/updates/4.3.
java.io.IOException: http://download.eclipse.org/eclipse/updates/4.3 is not a valid repository location.
That -should- be a valid repository location, it's listed about halfway down here. This unable to read repository is the same error that I got when trying to install the previous plugin from repository.
I then went to the Preferences -> Available Software Sites and tried all of the default installed repositories. There were 2 checked (the one listed above, and http://download.eclipse.org/releases/kepler) and 2 unchecked (http://download.eclipse.org/egit/updates and http://www.eclipse.org/modeling/updates). I hit reload on any of those and receive the same error message as above.
I can access websites from the internal browser. I've also tried changing my Network Connections preference to "Direct".
Really all I care about is getting a working Pig plugin, so I'll accept that as an answer. I'm getting the feeling though that my failure to get any repositories is a symptom of a bigger problem (and I really want to know what's going on), so if you have troubleshooting steps I'm willing to try anything.
Sites I'm trying to get the Pig editor from:
https://wiki.apache.org/pig/PigPen
http://romainr.github.io/PigEditor/
https://github.com/romainr/PigEditor
Solution :
Open up .exe eclipse file from command promtp followed by command -vmargs -Djava.net.preferIPv4Stack=true
or
changed in eclipse.init file.
Related
I'm following the tutorials and samples of the official WSO2 ESB documentation. When I create (or load) a synapse configuration in the WSO2 Developer Studio I'm getting the error as shown below:
Save problems
Save could not be completed.
Reason:
resources\sunErrorHandler.esb_diagram (The system cannot find the path specified)
This error shows up when I want to open anything in the Design view. Even when I'm not trying to save anything.
So far I have tried to add the path specified in the error, but without success. I already found a workaround to be able to save and deploy my ESB configurations. By using "Save as" I'm able to keep the changes I made in the XML files. However the error stills shows up when I open the new version of the file.
Does anyone know a better solution to permanently resolve this error message?
I had this problem as well, running eclipse.exe as administrator fixed it.
Issue remains unresolved for my Eclipse + DevStudio 3.8.0 install on a Windows 10 environment. However since I was experiencing some other issues with the WSO2 ESB I decided to migrate to a Linux (Ubuntu) environment. This seems to work much better, the eclipse does not seem to have this issue on Linux.
Eclipse want to write in C:\Program Files\eclipse\resources. I solve problem by adding full permissions to group users on folder C:\Program Files\eclipse
If this happens in Mac you can provide the required permission to the "/Applications/IntegrationStudio.app/Contents/MacOS/resources" folder.
I am trying to debug NS-2.34 using Eclipse Luna 4.4.2 under Ubuntu 13.10, and I had successfully configured NS2 and Eclipse for debugging by following the instructions from here "https://erl1.wordpress.com/2012/01/11/using-ns-2-with-eclipse/." The problem is, when I start debugging, debugging will not continue due to the error
Can't find a source file at "/build/buildd/eglibc-2/17/elf/dl-debug.c"
Locate the file or edit the source lookup path to include its location
I tried to locate the file in my system but I can't seem to figure that part out. How can I solve this error?
I think that's one of the many reasons why a lot of people transfer from NS2 to NS3 when they find that the module they would like to use is available in NS3.
For your problem, the page you are referring to has been a long time ago and there might be conflicts caused by new version.
For me, as a ns2er, when I modified some code or add new files, I just do "make" command and see what I got in the terminal. It works in most of the time.
Cheers,
Zeyu
I'm using latest Jenkins (v 1.590) LOL, but Jenkins official site say: 1.588. I'm 200% sure that I did see 1.589 and 1.590 few days back on Jenkins official download site(when I wanted to upgrade Jenkins to newer version).
This is what I see at the bottom of my Jenkins instance page.
Page generated: Nov 19, 2014 12:07:51 PMREST APIJenkins ver. 1.590
Now, the issue I'm facing is: Since I upgraded few of the plugins and Jenkins itself recently, some of the jobs are missing (I see this can happen during upgrades but upgrading to latest Jenkins should fix it and I'm two steps ahead of what Jenkins has on their official site, right):
I go to Manage Jenkins, Manage Plugins, Go to Available tab, check mark bunch of plugins to install (Artifactory, Maven project plugin etc ) and restart Jenkins using Jenkins GUI interface (which happens automatically once plugins are downloaded/installed in Jenkins GUI). After the restart, I do the same to see whether the plugin is now showing under "Installed" tab or not, but to my luck, it's still showing under "Available tab" and is NOT listed under "Installed" tab. If I open an existing job's configuration OR create a new job, the features available due to installed plugins are NOT visible i.e. if I installed Maven Project Plugin, I don't see an option to create a Maven style(2/3) project job while creating a new job.
I see valid .jpi files for respective plugins in plugins folder in JENKINS_HOME and there are some .pinned files as well. I have tried this a couple of times but the plugins are not visible once installed. Installation doesn't give any error during the whole operation.
Jenkins system log file (upon Jenkins restart) is attached (NOTE: Use slow download button to see/download this log file).
Download at SpeedyShare
or
[code]http://speedy.sh/x6vd8/Jenkins.System.Log[/code]
Issue was with the plugins permissions and expanded folders.
If you see under the plugins folder, you'll see .jpi or .hpi files (Jenkins jpi and Hudson hpi).
If I have awesomeplugin.jpi then there will be a folder called awesomeplugin.
Using Slav's hint, I ran bunch of checks and found out of 70+ plugins that I had installed, few of them somehow got "root" and "root" as their owner and group for their .jpi files and corresponding folder.
Now, The best solution one can try (the safest approach) is to chown -R yourvalidjenkinsuser:yourvalidgroup * and chmod -R 755 * as root. Before doing this, stop/shutdown jenkins.
I went even a step further, I first took backup of config files / whole jenkins JENKINS_HOME folder. Then I went to plugins folder and remove all .jpi corresponding folders using root account or as the owner of those folders (NOTE, I didn't delete the .jpi files). Then, I ran the above two commands (chown/chmod) and started Jenkins.
OUTCOME:
when I'm going to Jenkins > New item (to create a new job), Shenzi, all different types of jobs options are showing up (which included the Maven2/3 type job which I found got missing and few others like "Multi-configuration project" and Multijob Project job type.. all were missing and now they are showing up.
OK, I also checked one of the old job, went to its job's configuration and Shenzi!! I now see all the features there i.e. (Promoted Job plugin feature "Promtoe builds when.." check box. This feature which I configured sometime back, got missing but now it's showing up again.
Few of the Maven jobs that I created in past with Maven Release Plugin and Release Plugin POC work had bunch of steps in it. I found there was nothing in the Build step (after this whole mess), but after the above solution, I now see everything is back. I can see the configurations and build steps populated as they were set.
I hope this can help someone facing similar issue.
Still, I don't know why my Jenkins version is 1.590 (which Jenkins updated recently in automatic fashion) and Jenkins site today says, their latest Jenkins artifact is version 1.588 (seems like a mystery).
When you say "valid .hpi files", did you actually test that they are valid? You should be able to rename them to .zip and extract as a valid archive. An issue I face a lot is the network layer filtering system that we have in the office. It intercepts Jenkins's calls sometimes with the filtering system's login page, instead of whatever internet resource was being loaded.
If your .hpi files are not valid zip archives, open them in a text editor, and see if they are in the form of an html page/response of some kind.
I recently started using git with the egit plugin in eclipse, and I thought I had everything working. I cloned a remote repository to my machine, then made a change to a file, and went to commit the change via selecting the file in the project, and going to Team > Commit.... As soon as I do, I get the following error:
Unhandled event loop exception
org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
at org.eclipse.swt.SWT.error(SWT.java:4308)
at org.eclipse.swt.browser.Mozilla.initMozilla(Mozilla.java:1826)
at org.eclipse.swt.browser.Mozilla.create(Mozilla.java:687)
at org.eclipse.swt.browser.Browser.<init>(Browser.java:96)
...
(output abbreviated)
I am fully willing to accept that this is a bug of sorts (even though I thought this was working earlier today), but I am hoping someone may have encountered this problem once before.
Any insights? Even if it is only who I should file the bug against? I can provide any additional details. I should also point out that things work fine if I commit through the git repository view.
The problem is that the particular git workflow is creating a SWT Browser component that is having trouble loading on your particular OS + Windowing system + mozilla library version combination. There is a bit of black magic that has to go on to make sure you get the right configuration to allow the SWT browser to work with your embedded mozilla renderer. You can get detailed information on the SWT FAQ page here.
Also there are many other posts on this site that talk about how to resolve the dreaded "NO MORE HANDLES" problem here.
I get this error :
Share project was failed.
svn: Error writing entries file for
'C:\workspace2\Test'
svn: Entry '' has inconsistent
repository root and url
But we get this error only on a particular PC. Also if we move the workspace in a network drive, everything works fine.
We are using FDT(eclipse based IDE).
We are totaly new to SVN...
I am looking for any advice who will helping us solving the problem
UPDATE:
Without any particular change the problem is gone ?!
Can you reproduced the issue with the latest Eclipse (Galileo 3.5.1)?
And what Subversion Eclipse plugin are you using? (Subversive or Subclipse?)
There was a bug with Subversive with path including a special character (like ~).
In your case, check the 'C:\workspace2\Test' has no special character in it, like a space at the very end. ('C:\workspace2\Test')