I am new to using SVN, and I am trying it out on an android project. I am getting a commit failure based on this error..
svn: E155023: Can't set properties on 'C:\AndroidWorkSpace\myApp\bin\res': invalid status for updating properties.
I have searched for similar problems, but the lingo is all over my head. I just installed SVN on eclipse (it has successfully updated/committed previously), and I opened a repository on cloudforge.com. Other than that, I don't know much about it.
I have tried cleaning project and running team>clean up.
Here is the description of the bug, which might cause this error:
http://subversion.tigris.org/issues/show_bug.cgi?id=4004
Hope that helps!
I generally don't use Eclipse, so perhaps I'm doing something wrong, but I've spent several hours going over this and can't find a problem.
I needed a plugin for Eclipse (PigEditor or PigPen) and attempted to install it via repository, this failed with the error below. When it wouldn't install, I downloaded the .zip version, extracted the archive, found the folder containing features and plugins directory and tried installing it. This also failed. I also tried a PigPen .jar and it wasn't picked up at all when placing it into the plugins folder.
I noticed along the way that I received a bunch of error messages where it looked like Eclipse was trying to fetch dependencies. For example...
Error
Unable to read repository at http://download.eclipse.org/eclipse/updates/4.3.
java.io.IOException: http://download.eclipse.org/eclipse/updates/4.3 is not a valid repository location.
That -should- be a valid repository location, it's listed about halfway down here. This unable to read repository is the same error that I got when trying to install the previous plugin from repository.
I then went to the Preferences -> Available Software Sites and tried all of the default installed repositories. There were 2 checked (the one listed above, and http://download.eclipse.org/releases/kepler) and 2 unchecked (http://download.eclipse.org/egit/updates and http://www.eclipse.org/modeling/updates). I hit reload on any of those and receive the same error message as above.
I can access websites from the internal browser. I've also tried changing my Network Connections preference to "Direct".
Really all I care about is getting a working Pig plugin, so I'll accept that as an answer. I'm getting the feeling though that my failure to get any repositories is a symptom of a bigger problem (and I really want to know what's going on), so if you have troubleshooting steps I'm willing to try anything.
Sites I'm trying to get the Pig editor from:
https://wiki.apache.org/pig/PigPen
http://romainr.github.io/PigEditor/
https://github.com/romainr/PigEditor
Solution :
Open up .exe eclipse file from command promtp followed by command -vmargs -Djava.net.preferIPv4Stack=true
or
changed in eclipse.init file.
I have been struggling with a very weird issue that has suddenly popped up on the latest version of Eclipse Classic (4.2.2).
Everytime I try creating or refactoring a class or subclass in any of my projects (all Java) in my Eclipse workspace I get an error at the very top of my class that says
A class file was not written. The project may be inconsistent, if so try refreshing this project and building it
Again, this happens when I create new classes. And even when I rename current classes, then undo the renaming, its totally fine, but changing a single character in the name causes this error to happen for that specific class.
I have Auto Build on, and I tried multiple times to clean and refresh every project as well as restart Eclipse entirely.
I have literally no idea how to even start figuring out how to fix this. The solutions i've found through search didn't help, so i'm hoping I might find any clues here.
I had the same problem and here's how I solved it in the end:
It turned out that the disc space on the drive where workspace resides was full.
Silly mistake but worth checking.
In my case, this was caused by the fact that the build output directories were owned by a different user, and Eclipse could not write into them.
I had the same issues, the following worked for me:
Right click eclipse then running "as an Administrator"
Click Project > Clean.
Clean your workspace by starting eclipse from the command line with the -clean argument :
eclipse -clean
See also How to run eclipse in clean mode? and what happens if we do so?
I solved this problem by running Eclipse as root.
I had the same issue on Mac OS X. I had a maven project.
Try running the following command on Terminal. This looks like an access issue.
sudo mvn clean
Provide password for admin user.
Then open Eclipse and refresh your project.
We are using Eclipse here too and have to handle a workspace with more than 200 plug-ins. Every now and then people have similar problems with their workspace and inconsistencies reported in a weird way by Eclipse.
What people here usually do is (next step only in case previous step didn't help):
- trying to ContextMenu->Team->Clean/Refresh the whole workspace
- creating a new workspace and check out all necessary files from the repository
- reinstalling Eclipse to a new directory
From my experience after using the Eclipse IDE on a daily basis for many years, it doesn't make very much sense to waste too much time with these issues, unless they aren't solved by one of the steps above. It takes too much time to struggle with these things, while starting from scratch is done in an hour or less (and usually fixes the issue).
If your Eclipse still behaves strangely it might make sense to go through your installed plug-ins. Not all external plug-ins follow the Eclipse guidelines and can seriously harm the performance and operational consistency of your Eclipse installation (E.g. Sonar Plug-in, Toad Plug-in, ...)
In my case this kind of error caused due to disk space got full and it got resolved by just freeing disk space where eclipse have been installed.
That is c/d/e drivers.
I come up with the same error, and in my case, this is because the permission of the project/bin directory is not recursively 775
I fixed it by:
Remove the project/bin directory: sudo rm -rf project/bin
Switch to Eclipse, rebuild the project: Project->Clean...
Then no errors.
Try to launch Eclipse as Administrator.
In my case such error was caused by a question mark in a quoted method name (I use geb+spock combination for automated testing).
So this method name will throw an error "Do you want something?"()
And this will not "Do you want something"()
It may not be the best response but to fix it, I've just delete the error marker.
Had the same issue. but cleaning the project and restart eclipse didn't help and disk space was not the issue. Solved the issue by copy the code to notepad(just to not lose it) and then delete the class, recreate it and paste the code back in again.
I solved it changed the owner of the project files. I changed from root(old owner) to user my current(user that i use with eclipse).
Just changed and saved java file to recompile the class. Then error disappeared.
I was try run
Project->Clean...
And Rebuild. My problem was resolved
For linux (Debia) and working on Spring boot project (maven):
$ sudo mvn clean
Then open Eclipse and File -> Refresh.
I had same issue, it is something similar but this post didn't help in my case. I have many inner classes which is causing the compiler to create class names with all inner class names together that is creating class name more than 255 character file limit on NTFS! read it in some other blog. I thought it will be helpful to post here.
Ex : classA$InnerClassB$......InncerClassZ.class in target folder it won't generate the class if it exceeds this limit. Try renaming your inner class name shortened. In my case i have to add InnerclassZ as its exceeding its not generating class and Eclipse complaining.
A class file was not written. The project may be inconsistent, if so try refreshing....
I shortened InnerClassZ to IClassZ fixed the issue.
I had the same issue and it got fixed by running eclipse in administrator mode
Eclipse Shortcut-->Right click-->More-->Run as Administrator
I've been throught that error once when I used wsdl2java to extract java classes from a wsdl, it turns out that all classes were created in the same "class", causing end classes with long names (error - File name too long). When I organized and rename some classes the error disappeared.
I had this issue. I did the following, it resolved.
Open Eclipse in Administrator mode; Right click on eclipse.exe "Run as administrator"
Clean all projects.
#Denny's answer put me on the right track, though in my case it was the target directory. I deleted it for some reason and something automatically recreated with owner root. Changing the directory owner was not enough as it contained files that were also owned by root. So make sure to really remove the complete content of the directory and to change the owner.
In my case current user didn't have access to this project dir
Before giving a try to the above solutions. Just cleaned the project and it worked.
I recently started using git with the egit plugin in eclipse, and I thought I had everything working. I cloned a remote repository to my machine, then made a change to a file, and went to commit the change via selecting the file in the project, and going to Team > Commit.... As soon as I do, I get the following error:
Unhandled event loop exception
org.eclipse.swt.SWTError: No more handles [Unknown Mozilla path (MOZILLA_FIVE_HOME not set)]
at org.eclipse.swt.SWT.error(SWT.java:4308)
at org.eclipse.swt.browser.Mozilla.initMozilla(Mozilla.java:1826)
at org.eclipse.swt.browser.Mozilla.create(Mozilla.java:687)
at org.eclipse.swt.browser.Browser.<init>(Browser.java:96)
...
(output abbreviated)
I am fully willing to accept that this is a bug of sorts (even though I thought this was working earlier today), but I am hoping someone may have encountered this problem once before.
Any insights? Even if it is only who I should file the bug against? I can provide any additional details. I should also point out that things work fine if I commit through the git repository view.
The problem is that the particular git workflow is creating a SWT Browser component that is having trouble loading on your particular OS + Windowing system + mozilla library version combination. There is a bit of black magic that has to go on to make sure you get the right configuration to allow the SWT browser to work with your embedded mozilla renderer. You can get detailed information on the SWT FAQ page here.
Also there are many other posts on this site that talk about how to resolve the dreaded "NO MORE HANDLES" problem here.
I recently switched my development workstation from Windows to Linux (Fedora64). I use Eclipse with PDT and CVS for PHP programming. I copied my entire project folder, including the .project file to my Linux system and imported it in Eclipse. It automatically detected the CVS server IP and login. However, when I sync, it shows all my files (>8000) as outgoing, and moreover the sync is always stuck at 79%. How do I fix this without checking out the entire project from CVS again? Thanks.
This might be an issue with timestamps that are now slightly out-of-sync with the meta data recorded in the hidden ./CVS folders of your working copy. Try running cvs status on your sandbox (sorry, I'm not familiar with Eclipse's CVS interface, but that's how you would do it on the command line). That should reset the supposedly modified files.
You also might get away with simply running Update. If all else fails, do a fresh Checkout.
Update: I googled a little and found some articles that can be interpreted to say that Eclipse does an implicit status when doing an "Update" or "Update Check".