anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
I was trying to run the below command to install packages in Centos.
[cloudera#quickstart ~]$ sudo yum install -y pkgconfig
After running the above command getting the below error.
Loaded plugins: fastestmirror, security
Setting up Install Process
Error: File contains no section headers.
file: file:///etc/yum.repos.d/docker-ee.repo, line: 1
'<!doctype html>\n'
This is not related to Couchbase at all. Looks like your /etc/yum.repos.d/docker-ee.repo is not really plain text, and has HTML content instead. Try to remove this file and retry.
Getting following error:
error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
Already tried installing using below cmd:
sudo apt-get install ia32-libs-gtk
Getting error for this too:E: Unable to locate package ia32-libs-gtk
Seems you need to install x86 version:
sudo apt-get install libgtk2.0-0:i386
I'm trying to build a postgres database adapter (luapgsql) as part of my setup:
install:
- sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql
But the build can't find libpq-fe.h:
Error: Could not find expected file libpq-fe.h, or libpq-fe.h for PQ --
you may have to install PQ in your system and/or pass PQ_DIR or
PQ_INCDIR to the luarocks command. Example: luarocks install luapgsql
PQ_DIR=/usr/local
I've tried what's suggested above, apt-get install libpq-dev and just find \ -name libpq-fe.h. No luck so far. Any ideas where it might be?
So it turns out that running pg_config as part of the install: was the answer. I could read the output in the log.
In the end, the line that worked for me for installing luapgsql on travis is:
sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql PQ_INCDIR=/usr/include/postgresql PQ_LIBDIR=/usr/lib/x86_64-linux-gnu
Trying to install mysql-python. Got following error. Got mysql and pythond already installed. Any help will be highly appreciated
[root#uu include]# easy_install mysql-python
Searching for mysql-python
Reading http://cheeseshop.python.org/pypi/mysql-python/
Couldn't find index page for 'mysql-python' (maybe misspelled?)
Scanning index of all packages (this may take a while)
Reading http://cheeseshop.python.org/pypi/
Reading http://cheeseshop.python.org/pypi/MySQL-python/1.2.3c1
Reading http://sourceforge.net/projects/mysql-python
Best match: MySQL-python 1.2.3c1
Downloading http://pypi.python.org/packages/source/M/MySQL-python/MySQL-python-1.2.3c1.tar.gz#md5=310dd856e439d070b59ece6dd7a0734d
Processing MySQL-python-1.2.3c1.tar.gz
Running MySQL-python-1.2.3c1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-toQ0nx/MySQL-python-1.2.3c1/egg-dist-tmp-OeN5eG
unable to execute gcc: No such file or directory
error: Setup script exited with error: command 'gcc' failed with exit status 1
This will install GCC and others often required:
yum groupinstall 'Development Tools'
Can also be installed individual i.e yum install gcc
you need to install gcc (on centos, some variety of dev-tools)