Getting following error:
error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory
Already tried installing using below cmd:
sudo apt-get install ia32-libs-gtk
Getting error for this too:E: Unable to locate package ia32-libs-gtk
Seems you need to install x86 version:
sudo apt-get install libgtk2.0-0:i386
Related
anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
I tried installing the latest version of Mongo compass by running the RPM in the red hat instance:
sudo yum install mongodb-compass-1.17.0.x86_64.rpm
When I try to run the mongodb-compass, I am getting the below error:
[ec2-user#ip-10-93-230-148 ~]$ mongodb-compass
mongodb-compass: error while loading shared libraries: libgtk-3.so.0: cannot open shared object file: No such file or directory
Can anyone please advise on how to resolve this issue?
Thanks
DJ
I am able to run compass in Redhat instance by installing gtk3-devel
I am newbie for Cent os. Installing phantomjs on Cent os. Followed below steps but still facing issue.
Steps :
curl -O https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-i686.tar.bz2.
tar xvf phantomjs-1.9.1-linux-i686.tar.bz2
cp phantomjs-1.9.1-linux-i686/bin/phantomjs /usr/local/bin
sudo yum install freetype
sudo yum install fontconfig
Above all steps completed successfully but when I try to hit phantomjs, it shows error "phantomjs: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory."
Thanks in advance.
Just make sure you successfully run
yum install fontconfig freetype freetype-devel fontconfig-devel libstdc++
and then try to install as usual.
To remove this error.
# sudo yum install fontconfig
If you are still facing the error, Run
# sudo yum install fontconfig freetype libfreetype.so.6 libfontconfig.so.1 libstdc++.so.6
Note :
If you are using ubuntu or debian, use apt-get install to install this package.
centos, NodeJS, html-pdf
sudo yum install fontconfig (worked for me)
I've followed the tutorial on SE as well as trying the extra steps from Hertaville and bootc but I still get the error that prompted the original SE question. I'm stumped.
I get five steps into the process before I get the error:
sudo apt-get install git rsync cmake lib32z1 lib32ncurses5 lib32bz2-1.0
git clone git://github.com/raspberrypi/tools.git
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin
. ~/.bashrc
arm-linux-gnueabihf-gcc -v
Error:
arm-linux-gnueabihf-gcc: error while loading shared libraries:
libstdc++.so.6: cannot open shared object file: No such file or directory
libstdc++.so.6 is present in all three directory trees mentioned in the tutorials as well as ./lib/x86_64-linux-gnu/libstdc++.so.6, but adding the relevant one to the path doesn't help (see below). I suspect there's a library path not being set, but I have no idea what that is.
I'm doing this in a virtual machine running Ubuntu 13.10 with netbeans and other tools, plus a LAMP stack installed. netbeans will build and run C/C++ executables just fine (and obviously IO can do the same from the command line).
Other things I've tried without success
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/lib
Hertaville suggest adding 32 bit architecture:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6-i386 lib32stdc++6 zlib1g:i386
And the "build-essential" package:
sudo apt-get install build-essential git
Which also didn't help. I've also rebooted just in case.
As expected the answer is trivial - install lib32stdc++6
The first line above should read:
sudo apt-get install libc6-i386 lib32z1 lib32stdc++6
When i execute 'db2stop' or 'db2start' command on Centos finally 6.4 (Final). I am getting error as follows:
> error while loading shared libraries: libnuma.so.1: cannot open shared
> object file: No such file or directory
I tried as follows commands but it didn't work..
# yum install compat-libstdc++-33
# yum install libaio
waiting your solutions.
I executed the following command and I got it: apt-get install numactl
And also if you get following error
DBT3514W The db2prereqcheck utility failed to find the following 32-bit library file: "/lib/libpam.so*"
then execute
sudo yum install pam.i686