I was trying to run the below command to install packages in Centos.
[cloudera#quickstart ~]$ sudo yum install -y pkgconfig
After running the above command getting the below error.
Loaded plugins: fastestmirror, security
Setting up Install Process
Error: File contains no section headers.
file: file:///etc/yum.repos.d/docker-ee.repo, line: 1
'<!doctype html>\n'
This is not related to Couchbase at all. Looks like your /etc/yum.repos.d/docker-ee.repo is not really plain text, and has HTML content instead. Try to remove this file and retry.
Related
After successfully installing postgresql from source code, I got an error while installing Apache AGE. I have attached a screenshot of the error below. It would be great if someone can help out.Terminal view of command and error
I am searching online to find a solution but haven't been able to found yet.
From the image, it looks like you are using postgres 12.13.
For postgres 12, you should checkout to age for pg12 branch by doing git checkout release/PG12/1.1.1 and then make install.
I was also getting errors in a configuration which were resolved by using this command first.
sudo apt-get install build-essential libreadline-dev zlib1g-dev flex bison
Try this and this will solve your problem too
In addition to installing the essential libraries before the actual installation using:
sudo apt-get install build-essential libreadline-dev zlib1g-dev flex bison (Note: The above command is for Ubuntu only. If you are not on Ubuntu, See here)
It is also recommended to install the postgreSQL development files using:
sudo apt install postgresql-server-dev-xx
This is not the exact command to be typed in the terminal. Check out the link
here to see the exact compatible command to execute according to the version of Linux you are currently using.
I am trying to install a package on CentOS, but it throws error when I run the "yum" command. The internet connection is working fine.
I try to yum clean all but problem persist.
Error:
[root#dcos-master3 ~]# yum install ntp
Loaded plugins: fastestmirror
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this:
1. Contact the upstream for the repository and get them to fix the problem.
2. Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work).
3. Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ...
4. Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage:
yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid>
5. Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise:
yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
Cannot find a valid baseurl for repo: base/$releasever/x86_64
My yum repolist is the next:
[root#dcos-master3 ~]# yum repolist list
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repolist: 0
If I list the repolist:
[root#dcos-master3 ~]# yum repolist
Loaded plugins: fastestmirror
https://yum.dockerproject.org/repo/main/centos/%24releasever/repodata/repomd.xml: [Errno 14] HTTPS Error 403 - Forbidden
Trying other mirror.
To address this issue please refer to the below knowledge base article
https://access.redhat.com/solutions/69319
If above article doesn't help to resolve this issue please create a bug on https://bugs.centos.org/
repo id repo name status
base/$releasever/x86_64 CentOS-$releasever - Base 0
dockerrepo/$releasever Docker Repository 0
extras/$releasever/x86_64 CentOS-$releasever - Extras 0
updates/$releasever/x86_64 CentOS-$releasever - Updates 0
repolist: 0
BEFORE TRYING ANY OF THIS, HAVE A BACKUP OF YOUR MACHINE, YOU COULD DAMAGE YOUR OS MORE/COMPLETELY
It seems that your yum variable $releasever is somehow corrupt,
it usually is caused by missing centos-release package on the machine for some obscure reasons.
You can check if you have the package by:
rpm -qi centos-release
You will probably see:
"package centos-release is not installed"
First find out the exact centos version that you have by executing as root:
cat /etc/redhat-release
You will see something like this:
CentOS Linux release 7.3.1611 (Core)
You can fetch the centos-release package from repo by:
wget http://vault.centos.org/centos/7.3.1611/updates/x86_64/Packages/centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
Now run reinstall centos-release package via rpm:
sudo rpm -Uvh --replacepkgs centos-release-7-3.1611.el7.centos.2.5.x86_64.rpm
As next you can try to install something with yum and you might get:
[root#dcos-master3 ikerlan]# sudo yum install wget
error: db5 error(-30969) from dbenv->open: BDB0091 DB_VERSION_MISMATCH: Database environment version mismatch
error: cannot open Packages index using db5 - (-30969)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
Now you can try to reboot the machine or try to use the following command to rebuild the rpm db:
rpm --rebuilddb
I came across the same issue while downloading some packages in centos 7. After days of search, I found the solution:
Go to the yum repo directory.
cd /etc/yum.repos.d.
Make a copy of the CentOS-Base.repo file.
cp CentOS-Base.repo CentOS-Base.repo.old
Edit the CentOS-Base.repo file. Comment mirrorlist and uncomment baseurl.
vi CentOS-Base.repo
[base]
name=CentOS-$releasever - Base
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Now when you use yum, do the following.
sudo yum --disablerepo=* --enablerepo=base install httpd
Likewise for yum update.
sudo yum --disablerepo=* --enablerepo=base install httpd
It should work now.
I ran into this problem when attempting to install MariaDB on CentOS 7. I was super frustrated and after much searching found the answer at this link.
Here is what fixed this problem for me. Run as root.
# yum --disablerepo "*" --enablerepo epel install [package]
# yum clean all
"epel" can be whatever repo you like, but this one worked for me. Place [package] in the command just as written, not what package you are trying to install.
After you run the above, exit root and run whatever install you were attempting before encountering the error.
I noticed that in the failing url, your $releasever is %24releasever, but it should be 7 or 7.14.xx. Please check your yum config file at /etc/yum/var, or search in every .repo file, to see what is its value. It may be corrupted.
See Red Hat documentation for more information about how to set these variables.
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/6/html/deployment_guide/sec-using_yum_variables
yum install http://rpms.remirepo.net/enterprise/remi-release-7.rpm -y
yum -y install yum-utils
yum-config-manager --enable remi-php74
Then proceed to your installation/updates/etc
Always make sure NAT is active on your centos7. Specially when there is a VMnet2 for host. Because sometimes VMNet2 can be active instead of NAT and because of that you will not be able to connect to the internet through centos7. This is just a one reason for getting that error.
I have installed a mongodb instance once, but it stops running for a reason that I could not managed to solve. So I installed MongoDb 3.4 by using offical docs. There are 5 modules according to the installer. One of them is mongodb-org-server which install mongod (mongo daemonized). When I run the command:
sudo yum install -y mongodb-org
It installs all of modules except mongodb-org-server. It says it's installed. However, when I run mongod, I get there is no such a command. After that I tried to remove all of the modules:
sudo yum erase $(rpm -qa | grep mongodb-org)
It does not manage to remove mongodb-org-server and throws the error below:
Running Transaction
Erasing: mongodb-org-3.4.1-1.el6.x86_64 1/5
error reading information on service mongod: No such file or directory
error: %preun(mongodb-org-server-3.4.1-1.el6.x86_64) scriptlet failed, exit status 1
Error in PREUN scriptlet in rpm package mongodb-org-server
How I can fix this? I'll glad for your helps. Thanks.
I fixed the issue. Reinstalled the server package and deleted successfully.
sudo yum reinstall -y mongodb-org-server.x86_64
I'm working on a remote server (Ubuntu 14.04) through SSH -X. I have installed Sublime Text and when I try to open it I get
Gtk-Message: Failed to load module "canberra-gtk-module"
Unable to connect to dbus
How do I solve this?
sudo apt-get install libcanberra-gtk*
if you run that install it will get 120+ mb of libs, mostly. to get rid of that module error, you only need to install 70k. i fixed the same error with this single package:
sudo apt-get install libcanberra-gtk-module
that should do the trick. if that doesnt work try installing only the canberra libs, you don't need all those Xlibs, or you'd have them already ;)
here's just canberra packages apt listed:
libcanberra-gtk-common-dev libcanberra-gtk-dev libcanberra-gtk-module
libcanberra-gtk-module-dbg libcanberra-gtk0 libcanberra-gtk0-dbg
libcanberra-gtk3-0-dbg libcanberra-gtk3-dev libcanberra-gtk3-module-dbg
libcanberra-dev
10 total packages, instead of over 100 packages with that * wildcard. save space, boot time, sys speed etc, always, if you can :)
As I found at the end of this thread, it appears to be a problem with the libcanberra dependencies, I stumbled upon this and the solution worked for me on Sublime Text 2/Debian 8.
So try running this:
sudo apt-get install libcanberra-gtk*
This got rid of the GTK message, but the "Unable to connect to dbus..." stuff disappeared when I executed sublime as a non-root user.
On Debian Stretch:
sudo apt install libcanberra-gtk-module
This will install:
The following additional packages will be installed:
libcanberra-gtk0
The following NEW packages will be installed:
libcanberra-gtk-module libcanberra-gtk0
I'm trying to build a postgres database adapter (luapgsql) as part of my setup:
install:
- sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql
But the build can't find libpq-fe.h:
Error: Could not find expected file libpq-fe.h, or libpq-fe.h for PQ --
you may have to install PQ in your system and/or pass PQ_DIR or
PQ_INCDIR to the luarocks command. Example: luarocks install luapgsql
PQ_DIR=/usr/local
I've tried what's suggested above, apt-get install libpq-dev and just find \ -name libpq-fe.h. No luck so far. Any ideas where it might be?
So it turns out that running pg_config as part of the install: was the answer. I could read the output in the log.
In the end, the line that worked for me for installing luapgsql on travis is:
sudo luarocks install --server=http://rocks.moonscript.org/dev luapgsql PQ_INCDIR=/usr/include/postgresql PQ_LIBDIR=/usr/lib/x86_64-linux-gnu