Currently I am working a project that has have been using the pathlib library so I can work on my Windows desktop when I need too and on my MacBook Pro. Essentially be able to work between both operating systems. I have not have any issues at all until right now. Here is the set up:
I have a pipeline set up to automatically save a .joblib and a whole lot of .png files that will go to a directory called
output_dir = Path('../Trained_Models/Differential_gene_analysis/A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus/Models train on TCGA data and test on Rodriguez data/Oct-XX-20XX')
For example, if I want to save a .joblib file under the name RandomForest_TumorThrombus_104.joblib,I would use the command
joblib.dump(model ,output_dir / 'RandomForest_TumorThrombus_104.joblib')
On my MacBook Pro, I have no issues when this is ran, but on Windows it gives me the following error
FileNotFoundError: [Errno 2] No such file or directory: '..\\Trained_Models\\Differential_gene_analysis\\A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus\\Models train on TCGA data and test on Rodriguez data\\Oct-17-2022\\RandomForest_TumorThrombus_104.joblib'
I have tried to use the .resolve() method to get the absolute path but still gives me the same error. I have tried to experiment to try to see what is goin on such as using os.path.exists(). When using the os.path.exists() method I get True for the follwoing command:
os.path.exists(output_dir)
So it does indeed recognize that the directory exists. The next thing I tried was to rename the file to something like dddddd.joblib and that worked. But I find that only a few names for the file would allow me to save the files. During debug I found that the most recent Traceback occurs here:
with open(filename, 'wb') as f:```
I was wondering if anyone here had any idea what was going on here and how I can fix this issue? Please and Thank you.
The solution was to enable long paths on Windows.
I am trying to build package in Unreal Engine for Windows 64 Bit but I am getting weird error.
LogPackageName: Error: DoesPackageExist: DoesPackageExist FAILED: '/SunPosition/SunSky' is not a standard unreal filename or a long path name. Reason: Path does not start with a valid root. Path must begin with: '/Engine/', '/Game/', '/Paper2D/', '/AnimationSharing/', '/GeometryMode/', '/SpeedTreeImporter/', '/MagicLeap/', '/ChaosClothEditor/', '/ChaosNiagar
a/', '/ChaosSolverPlugin/', '/MagicLeapPassableWorld/', '/Niagara/', '/GeometryCollectionPlugin/', '/GeometryProcessing/', '/MotoSynth/', '/MediaCompositing/', '/PixelStreaming/', '/AudioSynesthesia/', '/PostSplashScreen/', '/Synthesis/', '/DatasmithContent/', '/OculusVR/', '/SteamVR/', '/PureWeb/', '/Config/', '/Script/', '/Extra/', '/Memory/', or '/Temp/'
I tried googling but the solution posted on UE forum didnt fix my issue. I am attaching log files here as well. Tried deleting blueprints, cache in AppData/Local/UnrealEngine, Intermediate Folder but nothing helps.
Using Cudafy version 1.29, which can be downloaded from here
I am executing the examples that are found in the install folder CudafyV1.29\CudafyByExample\
Specifically, "chapter 3" example that begins line 42 of program.cs calls the following:
simple_kernel.Execute();
which is this:
public static void Execute()
{
CudafyModule km = CudafyTranslator.Cudafy(); // <--exception thrown!
GPGPU gpu = CudafyHost.GetDevice(CudafyModes.Target, CudafyModes.DeviceId);
gpu.LoadModule(km);
gpu.Launch().thekernel(); // or gpu.Launch(1, 1, "kernel");
Console.WriteLine("Hello, World!");
}
The indicated line throws this exception:
Compilation error: CUDAFYSOURCETEMP.cu
'C:\Program' is not recognized as an internal or external command,
operable program or batch file. .
Which is immediately obvious that the path has spaces and the programmer did not double quote or use ~ to make it operational.
So, I did not write this code. And I cannot step through the sealed code contained within CudafyModule km = CudafyTranslator.Cudafy();In fact I don't even know the full path that is causing the exception, it is cut-off in the exception message.
Does anyone have a suggestion for how to fix this issue?
Update #1: I discovered where CUDAFYSOURCETEMP.cu lives on my computer, here it is:
C:\Users\humphrt\Desktop\Active Projects\Visual Studio
Projects\CudafyV1.29\CudafyByExample\bin\Debug
...I'm still trying to determine what the program is looking for along the path to 'C:\Program~'.
I was able to apply a workaround to bypass this issue. The workaround is to reinstall all components of cudafy in to folders with paths with no ' ' (spaces). My setup looks like the below screenshot. Notice that I also installed the CUDA TOOLKIT from NVIDIA in the same folder - also with no spaces in folder names.
I created a folder named "C:\CUDA" and installed all components within it, here is the folder structure:
I am trying to run ReSharpers command line tool InspectCode.exe. It's running fine doing it's job with the expected output.
However after my earlier attempt to get plugins to work, this time with the new version it is supposed to be supported. There is a switch in the command line interface that allows to specify the extension you want to use.
/extensions (/x) – allows using ReSharper extensions that affect code analysis. To use an extension, specify its ID, which you can find by opening the extension package page in the ReSharper Gallery, and then the Package Statistics page. Multiple values are separated with the semicolon.
But I cannot get it to work properly. I cannot even provoke any reaction to the /x switch at all. No matter how or what I pass, I get no feedback from the executable and the output is identical. I don't even get an error message when passing obvious garbage.
I tried the following commandlines for the exact same result:
inspectcode.exe /o="rcli.xml" /swea /x="ReSharper.StyleCop" "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ReSharper.StyleCop "my.sln"
inspectcode.exe /o="rcli.xml" /swea "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ABCDEFG "my.sln"
Result
JetBrains Inspect Code 9.1.1
Running in 64-bit mode, .NET runtime 4.0.30319.18444 under Microsoft Windows NT
6.1.7601 Service Pack 1
Enabled solution-wide analysis according to Inspect Code command line Setting.
Analyzing files
[files]
Inspection report was written to rcli.xml
What am I doing wrong? How to get extensions to work?
I already tried the R# forums, but it took them more then 24h to approve my post and so far I'm not sure someone else even read it.
Unfortunately, the support for extensions was dropped in 9.0 due to the refactorings in the "ReSharper platform". I hope that JetBrains will bring it back soon.
See RSRP-436208.
This is a late answer that might help future readers (like myself). Currently inspectcode.exe will automatically look for and use any NuGet packages that are in the same folder as the executable (source).
Example for CleanCode extension:
if you have a R# instance on some machine and install the extension, it will be placed in C:\Users\{user}\AppData\Local\JetBrains\plugins\MO.CleanCode.5.6.15
copy MO.CleanCode.5.6.15.nupkg and paste it next to inspectcode.exe
when running inspectcode with verbosity = VERBOSE, the extension should appear in the Zones list:
$cmd = "..\JetBrains.ReSharper.CommandLineTools.2019.3.4\inspectcode.exe"
$outputFile = "..\Output\$($outputName).xml"
& $cmd -o="$outputFile" $sln --verbosity=VERBOSE
Zones: (52pcs)[CodeInspectionPageImplZone, DaemonEngineZone,
DaemonZone, IAmd64CpuArchitectureHostZone, IAspMvcZone,
IBatchToolEnvironmentZone, IClrImplementationHost Zone,
IClrPsiLanguageZone, ICodeEditingOptionsPageImplZone,
IConsoleEnvironmentZone, ICppProductZone, ICpuArchitectureHostZone,
IDocumentModelZone, IEnvironmentZone, IHostSolutionZone,
IInspectCodeConsoleEnvironmentZone, IInspectCodeEnvironmentZone,
IInspectCodeZone, ILanguageAspZone, ILanguageBuildScriptsZone,
ILanguageCppZone, I LanguageCSharpZone, ILanguageCssZone,
ILanguageHtmlZone, ILanguageIlZone, ILanguageJavaScriptZone,
ILanguageMsBuildZone, ILanguageNAntZone, ILanguageProtobufZone, ILa
nguageRazorZone, ILanguageRegExpZone, ILanguageResxZone,
ILanguageVBZone, ILanguageXamlZone, INetFrameworkHostZone, INuGetZone,
IOperatingSystemHostZone, IProjectMode lZone,
IPsiAssemblyFileLoaderImplZone, IPsiLanguageZone,
IPublicVisibilityZone, IRdFrameworkZone, IRiderModelZone,
ISinceClr2HostZone, ISinceClr4HostZone, ITextContro lsZone,
IToolsOptionsPageImplZone, IWebPsiLanguageZone, IWindowsNtHostZone,
PsiFeaturesImplZone, ReplaceableByIntelliJPlatformZone, SweaZone]
Packages: (23pcs)[JetBrains.ExternalAnnotations,
JetBrains.Platform.Core.Ide, JetBrains.Platform.Core.IisExpress,
JetBrains.Platform.Core.MsBuild, JetBrains.Platform. Core.Shell,
JetBrains.Platform.Core.Text, JetBrains.Platform.Interop.CommandLine,
JetBrains.Platform.Interop.dotMemoryUnit.Framework,
JetBrains.Platform.Interop.dotMe moryUnit.Interop.Console,
JetBrains.Platform.Interop.dotMemoryUnit.Interop.Ide,
JetBrains.Platform.RdProtocol, JetBrains.Psi.Features.Core,
JetBrains.Psi.Features.Cpp .Src.Core, JetBrains.Psi.Features.src,
JetBrains.Psi.Features.Tasks, JetBrains.Psi.Features.UnitTesting,
JetBrains.Psi.Features.Web.Core, JetBrains.ReSharperAutomatio
nTools.src.CleanupCode,
JetBrains.ReSharperAutomationTools.src.CommandLineCore,
JetBrains.ReSharperAutomationTools.src.CommandLineProducts,
JetBrains.ReSharperAutomat ionTools.src.DuplicatesFinder,
JetBrains.ReSharperAutomationTools.src.InspectCode, MO.CleanCode]
I am new to S-Functions and Real TIme WorkShop. The S-Function has been created using an Embedded Matlab Function. The S-Function Works fine, but when i try to build the same, i get the following error report:
It appears that the build process was unable to locate some utility (e.g. make, compiler, linker, etc.). Please verify your path and tool environment variables are correct. You should be able to execute the make command: .\Radius_S_func2.bat at an MS DOS Command Prompt in the directory: C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source Currently, this generates the following error:
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>set MATLAB=C:\MATLAB\R2010b
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>.......\u_Utils\Build\make -f Radius_S_func2.mk GENERATE_REPORT=0 INCLUDE_MDL_TERMINATE_FCN=0 COMBINE_OUTPUT_UPDATE_FCNS=1 MAT_FILE=0 MULTI_INSTANCE_CODE=0 INTEGER_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ERT_S_FUNCTION=0 GENERATE_ASAP2=0 EXT_MODE=0 EXTMODE_STATIC_ALLOC=0 EXTMODE_STATIC_ALLOC_SIZE=1000000 EXTMODE_TRANSPORT=0 TMW_EXTMODE_TESTING=0 MODELLIB=Radius_S_func2lib.lib RELATIVE_PATH_TO_ANCHOR=.. MODELREF_TARGET_TYPE=NONE OPTS="-DRT -DUSE_RTMODEL -DERT" The system cannot find the path specified.
PLease guide me how to understand the error, so i can take care of it myself.
Thank you!!
Solution: The build target was not specified therefore matlab gave the above mentioned error. To resolve this one should specify the build environment for a specific target.