Currently I am working a project that has have been using the pathlib library so I can work on my Windows desktop when I need too and on my MacBook Pro. Essentially be able to work between both operating systems. I have not have any issues at all until right now. Here is the set up:
I have a pipeline set up to automatically save a .joblib and a whole lot of .png files that will go to a directory called
output_dir = Path('../Trained_Models/Differential_gene_analysis/A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus/Models train on TCGA data and test on Rodriguez data/Oct-XX-20XX')
For example, if I want to save a .joblib file under the name RandomForest_TumorThrombus_104.joblib,I would use the command
joblib.dump(model ,output_dir / 'RandomForest_TumorThrombus_104.joblib')
On my MacBook Pro, I have no issues when this is ran, but on Windows it gives me the following error
FileNotFoundError: [Errno 2] No such file or directory: '..\\Trained_Models\\Differential_gene_analysis\\A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus\\Models train on TCGA data and test on Rodriguez data\\Oct-17-2022\\RandomForest_TumorThrombus_104.joblib'
I have tried to use the .resolve() method to get the absolute path but still gives me the same error. I have tried to experiment to try to see what is goin on such as using os.path.exists(). When using the os.path.exists() method I get True for the follwoing command:
os.path.exists(output_dir)
So it does indeed recognize that the directory exists. The next thing I tried was to rename the file to something like dddddd.joblib and that worked. But I find that only a few names for the file would allow me to save the files. During debug I found that the most recent Traceback occurs here:
with open(filename, 'wb') as f:```
I was wondering if anyone here had any idea what was going on here and how I can fix this issue? Please and Thank you.
The solution was to enable long paths on Windows.
i am using waijung blockset to programm a stmµc. And i wanted to use CAN-Bus blocks but i am facing the following error:
The build process will terminate as a result.
Caused by:
Error, a block diagram was specified in S-function 'stm32f4_can/CAN Setup'. Please make sure your S-function name is not a Simulink model or the name of the current model. You can use the Matlab command 'which -all sfunction_name' to locate all occurrences of model files with the name sfunction_name
hereby i did not insatll MinGW-w64 C/C++ compiler yet. I also tried in comand window >> which -all sfunction_name
'sfunction_name' not found.
My cmake script is as follows:
FIND_PACKAGE(Matlab REQUIRED)
GET_FILENAME_COMPONENT(Matlab_BIN_DIRS ${Matlab_LIBRARIES} PATH)
SET(Matlab_LIBS "${Matlab_BIN_DIRS}/libmat.so ${Matlab_BIN_DIRS}/libmx.so")
INCLUDE_DIRECTORIES(${Matlab_INCLUDE_DIRS})
TARGET_LINK_LIBRARIES(myAPP ${Matlab_LIBRARIES} ${Matlab_LIBS})
following error information was printed when I built my projects.
:-1: error: No rule to make target '/usr/local/MATLAB/R2015b/bin/glnxa64/libmat.so /usr/local/MATLAB/R2015b/bin/glnxa64/libmx.so', needed by 'cimgio'. Stop.
But it worked after modifying the last line as
TARGET_LINK_LIBRARIES(myAPP ${Matlab_LIBRARIES} libmat.so libmx.so)
why full paths does not work here?
I am trying to run ReSharpers command line tool InspectCode.exe. It's running fine doing it's job with the expected output.
However after my earlier attempt to get plugins to work, this time with the new version it is supposed to be supported. There is a switch in the command line interface that allows to specify the extension you want to use.
/extensions (/x) – allows using ReSharper extensions that affect code analysis. To use an extension, specify its ID, which you can find by opening the extension package page in the ReSharper Gallery, and then the Package Statistics page. Multiple values are separated with the semicolon.
But I cannot get it to work properly. I cannot even provoke any reaction to the /x switch at all. No matter how or what I pass, I get no feedback from the executable and the output is identical. I don't even get an error message when passing obvious garbage.
I tried the following commandlines for the exact same result:
inspectcode.exe /o="rcli.xml" /swea /x="ReSharper.StyleCop" "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ReSharper.StyleCop "my.sln"
inspectcode.exe /o="rcli.xml" /swea "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ABCDEFG "my.sln"
Result
JetBrains Inspect Code 9.1.1
Running in 64-bit mode, .NET runtime 4.0.30319.18444 under Microsoft Windows NT
6.1.7601 Service Pack 1
Enabled solution-wide analysis according to Inspect Code command line Setting.
Analyzing files
[files]
Inspection report was written to rcli.xml
What am I doing wrong? How to get extensions to work?
I already tried the R# forums, but it took them more then 24h to approve my post and so far I'm not sure someone else even read it.
Unfortunately, the support for extensions was dropped in 9.0 due to the refactorings in the "ReSharper platform". I hope that JetBrains will bring it back soon.
See RSRP-436208.
This is a late answer that might help future readers (like myself). Currently inspectcode.exe will automatically look for and use any NuGet packages that are in the same folder as the executable (source).
Example for CleanCode extension:
if you have a R# instance on some machine and install the extension, it will be placed in C:\Users\{user}\AppData\Local\JetBrains\plugins\MO.CleanCode.5.6.15
copy MO.CleanCode.5.6.15.nupkg and paste it next to inspectcode.exe
when running inspectcode with verbosity = VERBOSE, the extension should appear in the Zones list:
$cmd = "..\JetBrains.ReSharper.CommandLineTools.2019.3.4\inspectcode.exe"
$outputFile = "..\Output\$($outputName).xml"
& $cmd -o="$outputFile" $sln --verbosity=VERBOSE
Zones: (52pcs)[CodeInspectionPageImplZone, DaemonEngineZone,
DaemonZone, IAmd64CpuArchitectureHostZone, IAspMvcZone,
IBatchToolEnvironmentZone, IClrImplementationHost Zone,
IClrPsiLanguageZone, ICodeEditingOptionsPageImplZone,
IConsoleEnvironmentZone, ICppProductZone, ICpuArchitectureHostZone,
IDocumentModelZone, IEnvironmentZone, IHostSolutionZone,
IInspectCodeConsoleEnvironmentZone, IInspectCodeEnvironmentZone,
IInspectCodeZone, ILanguageAspZone, ILanguageBuildScriptsZone,
ILanguageCppZone, I LanguageCSharpZone, ILanguageCssZone,
ILanguageHtmlZone, ILanguageIlZone, ILanguageJavaScriptZone,
ILanguageMsBuildZone, ILanguageNAntZone, ILanguageProtobufZone, ILa
nguageRazorZone, ILanguageRegExpZone, ILanguageResxZone,
ILanguageVBZone, ILanguageXamlZone, INetFrameworkHostZone, INuGetZone,
IOperatingSystemHostZone, IProjectMode lZone,
IPsiAssemblyFileLoaderImplZone, IPsiLanguageZone,
IPublicVisibilityZone, IRdFrameworkZone, IRiderModelZone,
ISinceClr2HostZone, ISinceClr4HostZone, ITextContro lsZone,
IToolsOptionsPageImplZone, IWebPsiLanguageZone, IWindowsNtHostZone,
PsiFeaturesImplZone, ReplaceableByIntelliJPlatformZone, SweaZone]
Packages: (23pcs)[JetBrains.ExternalAnnotations,
JetBrains.Platform.Core.Ide, JetBrains.Platform.Core.IisExpress,
JetBrains.Platform.Core.MsBuild, JetBrains.Platform. Core.Shell,
JetBrains.Platform.Core.Text, JetBrains.Platform.Interop.CommandLine,
JetBrains.Platform.Interop.dotMemoryUnit.Framework,
JetBrains.Platform.Interop.dotMe moryUnit.Interop.Console,
JetBrains.Platform.Interop.dotMemoryUnit.Interop.Ide,
JetBrains.Platform.RdProtocol, JetBrains.Psi.Features.Core,
JetBrains.Psi.Features.Cpp .Src.Core, JetBrains.Psi.Features.src,
JetBrains.Psi.Features.Tasks, JetBrains.Psi.Features.UnitTesting,
JetBrains.Psi.Features.Web.Core, JetBrains.ReSharperAutomatio
nTools.src.CleanupCode,
JetBrains.ReSharperAutomationTools.src.CommandLineCore,
JetBrains.ReSharperAutomationTools.src.CommandLineProducts,
JetBrains.ReSharperAutomat ionTools.src.DuplicatesFinder,
JetBrains.ReSharperAutomationTools.src.InspectCode, MO.CleanCode]
My CMake code looks like the following:
macro(macro_name target_name)
add_custom_command(TARGET ${target_name}
POST_BUILD
COMMAND MyCommand)
endmacro()
Running this I get the following message:
CMake Warning (dev) at ... (add_custom_command):
Policy CMP0040 is not set: The target in the TARGET signature of
add_custom_command() must exist. Run "cmake --help-policy CMP0040" for
policy details. Use the cmake_policy command to set the policy and
suppress this warning.
The target name "target_name" is unknown in this context.
The same code inside of a function works great but I need macro for other things.
CMake policy (http://www.cmake.org/cmake/help/v3.0/policy/CMP0040.html) suggests just ignoring of this warning (and ignoring of adding of postbuild step at all) or treating it as error depending on the settings.
This: http://www.cmake.org/cmake/help/v3.0/command/macro.html states that parameters behavior in macros is different from one in functions.
How do I properly refer to macro parameters to get this work?
I've managed to figure out the reason: in my case wrong directory was used as ${CMAKE_CURRENT_BINARY_DIR} inside of the macro. Fixing paths allowed to get desirable result