I tried to train the tesseract 4.1 using OCRD project but after training completed I copied the lang.traineddata but getting above error.
The tesseractWiki page is very confusing to understand asking to use combine_lang_model after making lstmf file. So Actually I have the lstmf file. I created these file by using tif/box pair.
Please help me for further step.
Related discussions：Failed to load any lstm-specific dictionaries for lang xxx
Suppose your training folder like this:
OCRD/makefile
OCRD/data/foo-ground-truth.
You could try as following steps:
Find the WORDLIST_FILE/NUMBERS_FILE/PUNC_FILE in the makefile, and change them to:
WORDLIST_FILE := data/$(MODEL_NAME).wordlist
NUMBERS_FILE := data/$(MODEL_NAME).numbers
PUNC_FILE := data/$(MODEL_NAME).punc
Suppose your base traineddata is eng.traineddata.
2.1 Download the .wordlist/.numbers/.punc files from the langdata_lstm.
2.2 Place them in OCRD/data
2.3 if the MODEL_NAME = foo, rename them as: foo.wordlist, foo.numbers, foo.punc
if you don't have the base traineddata, you could try this too. But if your base traineddata is afr, you should download the files from langdata_lstm/afr.
make training again
The cause of this error：
In OCRD, the default path of the above three files is $ (OUTPUT_DIR) = data / $ (MODEL_NAME), and all files in this path are automatically generated during the training process.
If the variable START_MODEL is not assigned, the makefile will not generate any related files under this path;
If the variable START_MODEL has been assigned, the foo.lstm-number-dawg、foo.lstm-punc-dawg、foo.lstm-word-dawg and so on will be produced in data / $ (MODEL_NAME). But they are not the right one. So there may be a bug in OCRD.
Using Cudafy version 1.29, which can be downloaded from here
I am executing the examples that are found in the install folder CudafyV1.29\CudafyByExample\
Specifically, "chapter 3" example that begins line 42 of program.cs calls the following:
simple_kernel.Execute();
which is this:
public static void Execute()
{
CudafyModule km = CudafyTranslator.Cudafy(); // <--exception thrown!
GPGPU gpu = CudafyHost.GetDevice(CudafyModes.Target, CudafyModes.DeviceId);
gpu.LoadModule(km);
gpu.Launch().thekernel(); // or gpu.Launch(1, 1, "kernel");
Console.WriteLine("Hello, World!");
}
The indicated line throws this exception:
Compilation error: CUDAFYSOURCETEMP.cu
'C:\Program' is not recognized as an internal or external command,
operable program or batch file. .
Which is immediately obvious that the path has spaces and the programmer did not double quote or use ~ to make it operational.
So, I did not write this code. And I cannot step through the sealed code contained within CudafyModule km = CudafyTranslator.Cudafy();In fact I don't even know the full path that is causing the exception, it is cut-off in the exception message.
Does anyone have a suggestion for how to fix this issue?
Update #1: I discovered where CUDAFYSOURCETEMP.cu lives on my computer, here it is:
C:\Users\humphrt\Desktop\Active Projects\Visual Studio
Projects\CudafyV1.29\CudafyByExample\bin\Debug
...I'm still trying to determine what the program is looking for along the path to 'C:\Program~'.
I was able to apply a workaround to bypass this issue. The workaround is to reinstall all components of cudafy in to folders with paths with no ' ' (spaces). My setup looks like the below screenshot. Notice that I also installed the CUDA TOOLKIT from NVIDIA in the same folder - also with no spaces in folder names.
I created a folder named "C:\CUDA" and installed all components within it, here is the folder structure:
I am trying to run ReSharpers command line tool InspectCode.exe. It's running fine doing it's job with the expected output.
However after my earlier attempt to get plugins to work, this time with the new version it is supposed to be supported. There is a switch in the command line interface that allows to specify the extension you want to use.
/extensions (/x) – allows using ReSharper extensions that affect code analysis. To use an extension, specify its ID, which you can find by opening the extension package page in the ReSharper Gallery, and then the Package Statistics page. Multiple values are separated with the semicolon.
But I cannot get it to work properly. I cannot even provoke any reaction to the /x switch at all. No matter how or what I pass, I get no feedback from the executable and the output is identical. I don't even get an error message when passing obvious garbage.
I tried the following commandlines for the exact same result:
inspectcode.exe /o="rcli.xml" /swea /x="ReSharper.StyleCop" "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ReSharper.StyleCop "my.sln"
inspectcode.exe /o="rcli.xml" /swea "my.sln"
inspectcode.exe /o="rcli.xml" /swea /x=ABCDEFG "my.sln"
Result
JetBrains Inspect Code 9.1.1
Running in 64-bit mode, .NET runtime 4.0.30319.18444 under Microsoft Windows NT
6.1.7601 Service Pack 1
Enabled solution-wide analysis according to Inspect Code command line Setting.
Analyzing files
[files]
Inspection report was written to rcli.xml
What am I doing wrong? How to get extensions to work?
I already tried the R# forums, but it took them more then 24h to approve my post and so far I'm not sure someone else even read it.
Unfortunately, the support for extensions was dropped in 9.0 due to the refactorings in the "ReSharper platform". I hope that JetBrains will bring it back soon.
See RSRP-436208.
This is a late answer that might help future readers (like myself). Currently inspectcode.exe will automatically look for and use any NuGet packages that are in the same folder as the executable (source).
Example for CleanCode extension:
if you have a R# instance on some machine and install the extension, it will be placed in C:\Users\{user}\AppData\Local\JetBrains\plugins\MO.CleanCode.5.6.15
copy MO.CleanCode.5.6.15.nupkg and paste it next to inspectcode.exe
when running inspectcode with verbosity = VERBOSE, the extension should appear in the Zones list:
$cmd = "..\JetBrains.ReSharper.CommandLineTools.2019.3.4\inspectcode.exe"
$outputFile = "..\Output\$($outputName).xml"
& $cmd -o="$outputFile" $sln --verbosity=VERBOSE
Zones: (52pcs)[CodeInspectionPageImplZone, DaemonEngineZone,
DaemonZone, IAmd64CpuArchitectureHostZone, IAspMvcZone,
IBatchToolEnvironmentZone, IClrImplementationHost Zone,
IClrPsiLanguageZone, ICodeEditingOptionsPageImplZone,
IConsoleEnvironmentZone, ICppProductZone, ICpuArchitectureHostZone,
IDocumentModelZone, IEnvironmentZone, IHostSolutionZone,
IInspectCodeConsoleEnvironmentZone, IInspectCodeEnvironmentZone,
IInspectCodeZone, ILanguageAspZone, ILanguageBuildScriptsZone,
ILanguageCppZone, I LanguageCSharpZone, ILanguageCssZone,
ILanguageHtmlZone, ILanguageIlZone, ILanguageJavaScriptZone,
ILanguageMsBuildZone, ILanguageNAntZone, ILanguageProtobufZone, ILa
nguageRazorZone, ILanguageRegExpZone, ILanguageResxZone,
ILanguageVBZone, ILanguageXamlZone, INetFrameworkHostZone, INuGetZone,
IOperatingSystemHostZone, IProjectMode lZone,
IPsiAssemblyFileLoaderImplZone, IPsiLanguageZone,
IPublicVisibilityZone, IRdFrameworkZone, IRiderModelZone,
ISinceClr2HostZone, ISinceClr4HostZone, ITextContro lsZone,
IToolsOptionsPageImplZone, IWebPsiLanguageZone, IWindowsNtHostZone,
PsiFeaturesImplZone, ReplaceableByIntelliJPlatformZone, SweaZone]
Packages: (23pcs)[JetBrains.ExternalAnnotations,
JetBrains.Platform.Core.Ide, JetBrains.Platform.Core.IisExpress,
JetBrains.Platform.Core.MsBuild, JetBrains.Platform. Core.Shell,
JetBrains.Platform.Core.Text, JetBrains.Platform.Interop.CommandLine,
JetBrains.Platform.Interop.dotMemoryUnit.Framework,
JetBrains.Platform.Interop.dotMe moryUnit.Interop.Console,
JetBrains.Platform.Interop.dotMemoryUnit.Interop.Ide,
JetBrains.Platform.RdProtocol, JetBrains.Psi.Features.Core,
JetBrains.Psi.Features.Cpp .Src.Core, JetBrains.Psi.Features.src,
JetBrains.Psi.Features.Tasks, JetBrains.Psi.Features.UnitTesting,
JetBrains.Psi.Features.Web.Core, JetBrains.ReSharperAutomatio
nTools.src.CleanupCode,
JetBrains.ReSharperAutomationTools.src.CommandLineCore,
JetBrains.ReSharperAutomationTools.src.CommandLineProducts,
JetBrains.ReSharperAutomat ionTools.src.DuplicatesFinder,
JetBrains.ReSharperAutomationTools.src.InspectCode, MO.CleanCode]
I am new to S-Functions and Real TIme WorkShop. The S-Function has been created using an Embedded Matlab Function. The S-Function Works fine, but when i try to build the same, i get the following error report:
It appears that the build process was unable to locate some utility (e.g. make, compiler, linker, etc.). Please verify your path and tool environment variables are correct. You should be able to execute the make command: .\Radius_S_func2.bat at an MS DOS Command Prompt in the directory: C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source Currently, this generates the following error:
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>set MATLAB=C:\MATLAB\R2010b
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>.......\u_Utils\Build\make -f Radius_S_func2.mk GENERATE_REPORT=0 INCLUDE_MDL_TERMINATE_FCN=0 COMBINE_OUTPUT_UPDATE_FCNS=1 MAT_FILE=0 MULTI_INSTANCE_CODE=0 INTEGER_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ERT_S_FUNCTION=0 GENERATE_ASAP2=0 EXT_MODE=0 EXTMODE_STATIC_ALLOC=0 EXTMODE_STATIC_ALLOC_SIZE=1000000 EXTMODE_TRANSPORT=0 TMW_EXTMODE_TESTING=0 MODELLIB=Radius_S_func2lib.lib RELATIVE_PATH_TO_ANCHOR=.. MODELREF_TARGET_TYPE=NONE OPTS="-DRT -DUSE_RTMODEL -DERT" The system cannot find the path specified.
PLease guide me how to understand the error, so i can take care of it myself.
Thank you!!
Solution: The build target was not specified therefore matlab gave the above mentioned error. To resolve this one should specify the build environment for a specific target.
I installed moodle 1.9.12 and now I want to use Algebra notation in content. I enable "TeX Notation" and "Algebra Notation" in administrator panel and also install mimetext and dvips and Imagemagic on the server. fortunately Tex Notation works fine but I got the following error for Algebra:
sh: /var/www/html/moodle/filter/tex/mimetex.linux: not found
The shell command
"/var/www/html/moodle/filter/tex/mimetex.linux" -e "/var/www/moodledata/filter/algebra/de06d6c44d98ba4e42dffca988bf530b.gif" -- '\Large \frac{\sin\left(z\right)}{x^{2}+y^{2}}'
returned status = 127
File size of mimetex executable /var/www/html/moodle/filter/tex/mimetex.linux is 830675
The file permissions are: 100775
The md5 checksum of the file is 56bcc40de905ce92ebd7b083c76e019e
Image not found!
Note: /var/www/html/moodle/filter/tex/mimetex.linux exists on the server and is executable!!!
What is the problem?? Any idea?????
From what you have described, calling the general tex filter debug page works and does not show up the same error.
/filter/tex/texdebug.php works, but /filter/algebra/algebradebug.php does not.
If this is the case, perhaps you could check for an open_basedir, or safe_mode_exec_dir being set to include the current working directory, or otherwise restricting the execution of /var/www/html/moodle/filter/tex/mimetex.linux, while the current working directory is /var/www/html/moodle/filter/algebra.
You could look at this by visiting /admin/phpinfo.php at your site, and look carefully at the effective values of open_basedir, safe_mode and safe_mode_exec_dir.
You could also check the apache error log or add the following lines to the top of the algebra debug php file, and you might see some extra error messages:
$CFG->debug = 6143 ;
$CFG->debugdisplay= 1 ;
Hope that helps