I tried to install SEQ-tools(datalust.seq) from https://datalust.co/download for my windows-server.
this was the .msi file i tried to install
https://datalust.co/download/begin?version=2022.1.7929
CMD automatically started and installation commands were running until reached an error during the installation :
during install seq seq config hash failed.
Does anyone have an idea to fix it??
anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
I've created a python application which uses Postgresql. I used psycopg2 library (v 2.8.4) when doing the development, but when trying to install it on the beanstalk, it gives the following error:
Error: pg_config executable not found.
pg_config is required to build psycopg2 from source. Please add the directory
containing pg_config to the $PATH or specify the full executable path with the
option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
If you prefer to avoid building psycopg2 from source, please install the PyPI
'psycopg2-binary' package instead.
For further information please check the 'doc/src/install.rst' file (also at
<http://initd.org/psycopg/docs/install.html>).
Anyone have idea how to solve this?
Found the answer to the question. Instead of installing the psycopg2 directly, use psycopg2-binary==2.8.4.
Similar question is also being asked here
When i execute 'db2stop' or 'db2start' command on Centos finally 6.4 (Final). I am getting error as follows:
> error while loading shared libraries: libnuma.so.1: cannot open shared
> object file: No such file or directory
I tried as follows commands but it didn't work..
# yum install compat-libstdc++-33
# yum install libaio
waiting your solutions.
I executed the following command and I got it: apt-get install numactl
And also if you get following error
DBT3514W The db2prereqcheck utility failed to find the following 32-bit library file: "/lib/libpam.so*"
then execute
sudo yum install pam.i686
Trying to install mysql-python. Got following error. Got mysql and pythond already installed. Any help will be highly appreciated
[root#uu include]# easy_install mysql-python
Searching for mysql-python
Reading http://cheeseshop.python.org/pypi/mysql-python/
Couldn't find index page for 'mysql-python' (maybe misspelled?)
Scanning index of all packages (this may take a while)
Reading http://cheeseshop.python.org/pypi/
Reading http://cheeseshop.python.org/pypi/MySQL-python/1.2.3c1
Reading http://sourceforge.net/projects/mysql-python
Best match: MySQL-python 1.2.3c1
Downloading http://pypi.python.org/packages/source/M/MySQL-python/MySQL-python-1.2.3c1.tar.gz#md5=310dd856e439d070b59ece6dd7a0734d
Processing MySQL-python-1.2.3c1.tar.gz
Running MySQL-python-1.2.3c1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-toQ0nx/MySQL-python-1.2.3c1/egg-dist-tmp-OeN5eG
unable to execute gcc: No such file or directory
error: Setup script exited with error: command 'gcc' failed with exit status 1
This will install GCC and others often required:
yum groupinstall 'Development Tools'
Can also be installed individual i.e yum install gcc
you need to install gcc (on centos, some variety of dev-tools)