unable to run apples EADemo app - iphone

I have restarted iPhone development after a long intervak and was trying to follow apple's source code 'EADemo' I guess its been configured to run on iPhone. Can you please let me know what changes needs to be done so that I can run the code on simulator.
Thanx in advannce

It was better if you could upload the error. but the problem is usually the "Base SDK" version of the example.
you should go to the most upper app folder in the xcode file browser, right click on the icon (it should be blue with the name of the app).
select - "get info"
look for "Base SDK"
set it to the last updated version.
sometimes it is required to move between "Debug" and "Release" to get the change.
make sure you are on simulator.
good luck

Related

Finished running <App> on iPhone 6.1 Simulator

I'm developing a new application for Iphone, using Xcode (Version 4.6 (4H127)) and the iPhone 6.1 simulator (Versión 6.0 (369.2)).
At the beginning everything was great: every time I pressed the "run" button, the application was loaded into the simulator and I was able to test it. But sometimes it is not working: when I press the run button, I only get the message "Finished running on iPhone 6.1 Simulator". The code successfully compiles (only minor warnings).
The main problem is that when I get this message, the only way I can use the simulator again (in this project, the rest of the xcode projects seems to work properly) is by starting a new project and adding every file to it.
I've tried to delete de derived data, restart de simulator, restart de computer, etc. Even I made a snapshot when the simulator was working, but when I go back to the snapshot state, the simulator still don't work.
What can I do? Any idea?
1.Manually launch the iOS Simulator.
2.From the "iOS Simulator" menu, click "Reset content and settings",
3.Close and rebuild your app.
This problem may arise when you have problems with your project's plist's target membership. Select your info plist file from project navigator folder structure's Supporting Files, go to interface builder pane(Utilities Section under View in Top Bar), then look for Target Membership in File Inspector pane, if it is checked, uncheck it. Clean & Build, Hope it helps.
Library > Application Support > iPhone Simulator > 6.1 (or whichever you're using) > Applications > Your Application and delete it.
Rebuild your app and relaunch.
I had the same problem, with the same "failed to attach to process ID 0" (I actually didn't notice that error until I saw that you said you had that error). In one of my projects the 6.0 simulator didn't work, but works in my other projects. Also my 5.1 simulator worked.
What worked for me was based off this other answer for a similar question: https://stackoverflow.com/a/12423912/159758
Go to the Product menu and find the Edit Scheme menu there.
While in Edit Scheme window, select the "Run" option on the left hand side of the screen and then on the right hand side, change the debugger from LLDB to GDB.
Run the project, this worked in the simulator.
Then Go back to the Edit Scheme and set back to LLDB.
I noticed you've tried setting the debugger to GDB and not a debugger, but thought I'd mention what helped me, since you're question helped me get to the bottom of my problem (i.e. seeing the "failed to attach to process ID 0" message).
This problem may arise due to presence of more than one info.plist file.
I also faced a similar problem, and eventually found that while adding some resource file from another project I also added its info.plist file.
Once check your Build phases> Copy Bundle Resources, whether another info.plist file exist there or not. If exists then delete it, clean the project and rebuild it.
Hope it helps.....
I ran into the same issue and somehow was able to fix it and almost immediately it went back to being broken. I can tell what broke it though.
I added a couple of folders (folder references) with files in them to the copy bundle resources section. That broke it. If I recall right, I had removed both of those and was messing around with DeploymentTarget. I might have reset the simulator earlier. Regardless, it started working. So,
there is hope for a fix
this thing is caused by folder resources that need to be copied into the bundle
Updated:
I was able to get it working again. Here is what I did..
- Cleared out the derived data folder
- Shut down the simulator app
- Also cleared the deployment in the simulator folders (Users/XXXXXX/Library/Application Support/iPhone simulator/6.1/Applications)
Since last time adding the folders to the bundle caused it to lock up, I tried it step by step adding one folder to the bundle and trying. Turns out one of my folders was named Resources and it dawned on me that particular name could potentially be colliding with something else the app looks for. So I renamed that folder to Res and tried it. It works now.
So there you have it.. Follow the steps above to get out of the problem.
Avoid copying folders called Resources to your bundle.

Xcode cannot run using the selected device (Weird error)

I'm trying to debug an application on my iphone. I was able to do it before I updated Facebook client library yesterday. After updating, something weird happened and now I got the "Xcode cannot run using the selected device" error.
Error can be seen from the screenshot. Note that in the upper middle it says "Finished running FacebookSDK on baysungur's iPhone", which is weird because my app's name is different.
I tried some things like adding architectures to build settings, decreasing minimum deployment target, etc. They did not work.
Anyone has any idea?
I'm using Mountain Lion and Xcode 4.4.1. I'm trying to connect to a iphone 4.
Note: I was able to connect to device before updating that facebook client.
edit: Well, a similar thing also happens for simulator. Now I basically can not debug my app in any way.
Facebook library had a file named Info.plist, which caused xcode's head to be confused.
Weird thing is that I was seeing correct settings in project's settings. I mean everything seemed correct in that UI but appearantly xcode was using wrong Info.plist in action.
Deleting that second Info.plist solved the issue.
Is device is connected in organizer? If yes then quit your xcode and also restart your device and choose valid provisioning profile and try again.
thanks

Newbie: Errors in an iPhone app

I'm really newbie in iOS and I have to handle a complicated situation. I was given an iPhone app developed by someone and I have to make it work. The guy who developed it has told me that it worked, but sometimes crashed in an iPhone. I've never developed using iOS and I don't really know how this app works.
Well, when I open the app with Xcode, the first problem that I detect is some errors with the references. The app uses the project CorePlot-CocoaTouch.xcodeproj. I've added again this project and solved the references (I've followed some other posts like this one: http://www.jaysonjc.com/programming/pie-chart-drawing-in-iphone-using-core-plot-library.html).
I want to test it with the simulator (I don't have an iPhone yet). I have a doubt here...should I use iOS Device, or iOS Simulator as Base SDK? Firstly I chose iOS Simulator, but it appeared a problem with Cocoa.framework (it turned into red).
Anyway, using iOS Device as Base SDK, I build the project and it says "Build failed (59 errors, 3 warnings)". I check out the errors, and most of them are "Expected specifier-qualifier-list before ..."
Can anyone help me? This is more or less the situation, but I can provide more specific details if they're needed.
I'm sorry if I'm talking about something really basic, but I've been trying to solve it for 2 weeks and I give up. I've tried to talk to the guy, but he's not really helpful..
Thanks for the replies!
By the way, I didn't say it and I don't know if it's relevant or what it means. The guy has a directory called "Libraries" where it's stored the CorePlot. The files there are the same than if you download the CorePlot project from other source. The only exception is a folder called "SDKBuild", which contains files like "build.sh", "iphoneos-SDKSettings.plist" or "iphonesimulator-SDKSettings.plist". I'm really newbie, so it's probably obvious, but I have no idea...
just try to add CocoaTouch framework to your project.
and for base SDK use "latest iOS".
Right click on the project name in 'group & files' set on the left of xcode. Choose add -> Existing Frameworks.
Find Cocoa.framwork and click add. Do this to all red colored framework.
Choose IOS Simulator as base SDK.
Try run it..
If you want to run the app on simulator, you have to build with iOS simulator. The base SDK basically sets the OS version (this will be the same regardless of whether you are running the app on simulator or device). You should be chaining the build settings to device only if the device is connected and if you have installed the appropriate provisioning profiles.

facebook integration in iphone

i have download code from http://svn.facebook.com/svnroot/platform/clients/packages/fbconnect-iphone.zip
and i done all the thing according to seen in this tutorial
still get an error when i set path for "projects/FacebookAPI/src"
like this facebookconnect undeclared still i have include all the things necessarly.
please help me........
This type of error generate in my app....
error: There is no SDK with the name or path 'iphoneos3.1.2'
Please help me.....
use this blog to the complete facebook integration
http://www.raywenderlich.com/77/how-to-post-on-facebook-with-your-iphone-app
Your project that you are working with seems to be an older one.
As iOS is updated, newer version of the SDK are released, which don't include the older SDKs. You need to change the SDK version of your project. Right click on the blue project icon in Xcode and click "Get Info". You will want to change the "Base SDK" setting to one of the available options, from 3.1.2.
Try building yur project. If this does not work, right click on your active target (or click Project Settings->Edit Active Target) and change the "Base SDK" there as well.
Try building you project. If this does not work, right click on your project icon in the lefthand panel and click "Reveal in Finder". In Finder, right click on your xcodeproj file and click "Show Package Contents". At this point, I suggest closing Xcode. Open each of the three files and search for "iphoneos3.1.2" if you find it, replace 3.1.2 with the SDK number you want to use (probably 4.2.1). Save the file(s) which you modified and then, if you closed Xcode earlier, open it.
You should be able to build now.

There is no SDK with the name or path "iphoneos4.0"

I download a sample of UICatalog and run it.When I compile it ,it shows the failed message:There is no SDK with the name or path "iphoneos4.0".I find the "Base SDK" of UICatalog's Targets is iphone Device 4.0(missing).How can I solve this question and run it.
Thank you!
Select the root level of the project, in "Groups & Files". It's blue. Then hit command-I to get its Info.
Pick "Build" from the segmented controller at the top of the info window. In the first section of that panel you'll see Base SDK as one of the first few lines of options. Select the latest version of the SDK you find in there, and close the window to save your options.
Build-and-run the project, and you should be good to go.
EDIT, because I see from the comments that people are finding this answer who have a slightly different question than the OP's, so here's one other thing to try. It could also be you have "iOS Device" selected as your build target. If so, and if what you really want is for it to launch into the simulator, select "Simulator" instead.
After loading the project into XCode..
Under Groups and Files
right click on UICatalog<-(or your demo project name) and select Get Info
in Base SDK select IOS Simulator 4.1
Close and save info pane
expand Targets exposing UICatalog<-(or demo project name)
right click on UICatalog and select Get Info
in Base SDK select IOS Simulator 4.1
Combo box in UICatalog project pane (upper left corner) should switch to "Device - 4.1 | Debug" instead of "No Base SDK"
if you Build and Run at this point you might get another error. If so, open the UICatalog combo and switch from Device to Simulator
The "official link" mentioned above states…
"Note: Targets can override build settings defined at the Project level. "
..but should probably read "will" instead of "can"
Ok, I've solved it.
In Groups & Files go to Targets and select your target.
Press Ctrl+I (or open the info in some other way)
Set the Base SDK of your target
(The Base SDK should also be set at the project)
Steve nailed it. This is an Xcode bug. I loaded the NavBar sample and Xcode didn't even offer the simulator as an option, and it complained about the missing SDK even though it was set correctly in the project and wasn't set at all on the target.
Do what Steve said:
"The only way I could resolve it (in fact, the only way I could get the option of running in the simulator at all) was to change from debug to release and back. The dropdown still shows Base SDK Missing but if you click it, the simulator options are there and it builds."
My problem was that in the sample code another xcodeproj was embedded. So I looked after that file with Finder, opened it with Xcode and than the same as Dan said: Project -> Edit Project Settings -> Under "Architectures" set Base SDK to "iPhone Simulator x.x" (the latest one you have installed)
I had the same issue with another Apple sample app. The only way I could resolve it (in fact, the only way I could get the option of running in the simulator at all) was to change from debug to release and back. The dropdown still shows Base SDK Missing but if you click it, the simulator options are there and it builds.
I think that's a bug.
Many answers here, none seem to be complete enough about this, and it's all a mess. But they are all helpful. Here, I just want to compile all helpful pieces in one answer. Thanks to Larry (who have almost everything compiled into steps already), Steve, Dan Ray, dkk, geowar and lqf.
This picture from apple is a little decieving and outdated (talking about iOS SDK 4.0 and we're currently at 4.1) but it does show where you should change the project settings. Just select iPhone Simulator 4.0 if it was previously on iPhone Device 4.0.
Other than that, they say "Targets can override build settings defined at the Project level". So, yeah, also go ahead, open Targets and set all of their Base SDK back to default by pressing delete on it. If they were bolded, they'll become regular indicating a default value, which should be iPhone Simulator 4.0 if you did the first step right.
Just realize there are many places where Base SDK can be wrong:
Under Project Info
Under Target Info
Under different configurations for both Project and Target
And that under Target it should be set to default, which is value from Project.
There's still something about the overview combo sometimes having and sometimes not having more than 1 option such as "Device" and "Simulator" that I just couldn't understand yet, but this is another potential configuration place for Base SDK being wrong.
You have to make sure that you change to the "iPhone Simulator" under the project settings in the appropriate configuration (i.e. if you are building a debug build you have to change to the simulator under the debug configuration).
For some reason I was getting this error when I did change the simulator but realized that I was doing a debug build but changed to the simulator under the release configuration and not the debug configuration.
dkk's answer is what made things work for me. I had to change the Base SDK on the target and not just the project. Perhaps you have to do both.
I got a similar error after upgrading my iPhone to iOS4.2.1(8C148a). The situation is as following.
I was using Xcode 3.2.4, but it does not support iOS4.2.1. So I downloaded Xcode_3.2.5_and_ios-sdk_4.2_final.dmg which is 3.78GB requiring 9.53GB to install. Then I ran my ap with Xcode 3.2.5. That is where I got the above error message.
Now it is ok. I solve this based on Geowar's answer:
For the official answer:
http://developer.apple.com/library/ios/#qa/qa2010/qa1701.html
Please be noted that if you have done as Geowar said and the message is still there. Try to close Xcode 3.2.5 and restart it. That is how it works for me.
Another thing is that if you have just upgraded to iOS4.2.1 like me. When you try to load the a/p from Xcode 3.2.5 the first time. Xcode 3.2.5 may still give you "No provision iOS device connected". Please try to go to organizer and click on your iPhone under DEVICES on the left bar. Wait for a while to let Xcode in sync with your iPhone with iOS4.2.1. Then it will work. At least it work for me.
Jesse
Ok, so I struggled through this too. Based on some of the answers above and from the apple development forum, I was able to figure out what worked for me.
In XCODE, if you notice that the pull down at the top left of the window says "BASE SDK MISSING", you are going to get this error "There is no SDK with the name or path “iphoneos4.0”". To fix the problem:
double click on Group & Files in the upper part of the left pane of xcode. This will open a window
go to the Build tab of the new window
click on the row that says "BaseSDK" and select "Latest iOS (currently set to iOS 3.2)
The Configurations pull down near the top should now say "All Configurations". If not, set it.
close the window.
Now if you try to build, you will get a different error, something like: Code Sign error: The identity 'iPhone Developer: x Xxxxx' doesn't match any identity in any profile ...
So, now what you need to do in xcode is to click on the pull down in the upper left corner (the pull down that had the original BASE SDK MISSING indication, but probably has something different now), and make sure that both "Simulator" and "Debug" are checked as options in the pull-down.
now you should be good to go.
I just went Project -> Edit Project Settings -> Build -> then change the Base SDK to iPhone 4 simulator or I'm assuming whichever SDK you want to use.
I never had to specify the build for a given target, although my program was created on a mac that was already configured to use the iPhone 4.0 simulator.. so perhaps the targets were set for the simulator SDK and the project itself wasn't? Either way... just glad it works.
I was having the same problem and what I did to solve it was:
Go to Menu Project
Go to Set Active SdK
Select the option SIMULATOR instead of DEVICE
Build and Run and the ERROR has gonne!
I hope it works for you guys... =)
I just had a situation where I changed the Base SDK to 4.2 on my project after updating to Xcode 3.2.5, but I kept on getting the "There is no SDK..." error. I finally opened the project file (MyProject.xcodeproj/project.pbxproj) in a text editor and looked around. There was no mention of 4.0 anywhere, only 4.2. BUT when I then saved that file, it all started working in Xcode. Perhaps some permission on the file or something else. Have no idea really, but it worked.
I got this error when one of my configurations still referenced an old (iOS) SDK. Note that the error shouldn't have come up when I tried to build a totally different configuration (with correct Base SDK setting), so this smells like an XCode bug to me.
People suggesting that you don't set the base SDK in at target-level have probably never created projects which contain targets for different platforms all in one project file (in my case Mac and iOS targets, so setting the base SDK once in the project file is nonsense advice).