So I need a few simple pointers with the BIRT chart API.
I am trying to draw a simple line chart of a numeric value over time. I have a vector of (Date,Double) pairs as input. I have read through the examples in org.eclipse.birt.chart.examples but not yet gained enough traction with the API to start making use of it. Just composing a org.eclipse.birt.chart.model.impl.ChartWithAxesImpl has me stumped.
The eventual destination is an Eclipse editor, and that I can do. Is there a tutorial or book anyone can recommend that might get me going with the BIRT chart side?
I should be very grateful
M.
Well. There is this example: http://www.eclipse.org/articles/article.php?file=Article-BIRTChartEngine/index.html
But I am having some problems actually getting it to work myself. All I end up with is an exception like this:
java.lang.NullPointerException
at org.eclipse.birt.chart.device.swt.SwtTextMetrics.getHeight(SwtTextMetrics.java:178)
at org.eclipse.birt.chart.computation.Methods.computeFontHeight(Methods.java:1272)
at org.eclipse.birt.chart.computation.BIRTChartComputation.computeFontHeight(BIRTChartComputation.java:30)
at org.eclipse.birt.chart.computation.EllipsisHelper$SimpleTester.<init>(EllipsisHelper.java:213)
at org.eclipse.birt.chart.computation.EllipsisHelper.createSimpleTester(EllipsisHelper.java:176)
at org.eclipse.birt.chart.computation.EllipsisHelper.simpleInstance(EllipsisHelper.java:183)
at org.eclipse.birt.chart.computation.LabelLimiter.limitLabelSize(LabelLimiter.java:256)
at org.eclipse.birt.chart.computation.LabelLimiter.limitLabelSize(LabelLimiter.java:211)
at org.eclipse.birt.chart.model.layout.impl.TitleBlockImpl.computeBox(TitleBlockImpl.java:288)
at org.eclipse.birt.chart.model.layout.impl.LabelBlockImpl.getPreferredSize(LabelBlockImpl.java:266)
at org.eclipse.birt.chart.internal.layout.LayoutManager$ChartLayout.<init>(LayoutManager.java:111)
at org.eclipse.birt.chart.internal.layout.LayoutManager.doLayout_tmp(LayoutManager.java:1145)
at org.eclipse.birt.chart.internal.layout.LayoutManager.doLayout(LayoutManager.java:1310)
at org.eclipse.birt.chart.factory.Generator.build(Generator.java:1092)
I had the same trouble with the examples from org.eclipse.birt.chart.examples. There are some good java code snippets, but you do not see to what they correspond. This is why I decided to generate all the examples and put them on a web site: BIRT Charts Gallery.
Related
I have a simple scenario wherein I have to display data in the grid. I have worked with similar scenarios before but I'm not sure why this error is coming.
The error in console says : e.forEach is not a function at at e.recursiveFunction (ag-grid-enterprise.min.js:2)
This doesn't point to a specific piece of code that I've written. I'm using ag-grid with angular 1.
Can someone please help me understand what might be causing this?
I have application in Angularjs2, and developers have not been using ids into it. Now I have to implement the Protractor on same application. Is there anyway to implement the Protractor without using "absolute XPath"?
Thanks in advance!
Please find a huge range of locator-possibilities on the official Protractortest API Page
Every element on a page needs to be uniquely identifiable... else the page wouldn't work, no matter which technology. Therefore with the help of any of the above provided locator-possibilities you'll always find the element you're looking for.
And there is never a need for XPath, except for this only one. (though there is an parentElementArrayFinder introduced in the meantime, so not even that one exception is valid anymore)
UDPATE
If you could use XPath, you can for sure use CSS-Locators.
Here some examples for locators:
$('div.class#id[anyAttribute="anyValue"] div.child.somewhere-below-div-point-class')
element(by.cssContainingText('div[data-index="2"]', 'select this option'))
Or as a specific example the "Learn More" of the "Tree List" section of https://js.devexpress.com/ :
treeListSection = element(by.cssContainingText('div.tab-content h2', 'Tree List')).getDriver();
learnMoreBtn = treeListSection.element(by.cssContainingText('a.tab-button','Learn More'));
learnMoreBtn.click();
Those are just examples, but there is always a way to do it.
If you provide some example-HTML in your Question, I can direct you towards a solution.
UPDATE 2
For getting the Parent Web Element, one could use getDriver() as well
My apologies if the question is duplicated. We are facing an issue with the analysis of a profile using Watson Personality Insights API in Spanish. We have a demo we implemented using PI API version 2 and then we tested the results (exact same text) with the demo published on developer cloud(in spanish) and we found important differences on how the big five were calculated when the facet values were not that different. Is it possible that these differences are caused because of the API version? The issue that with our demo the big five values produced a kind of negative summary profile when the developercloud summary is kinder.
We could send both result jsons. For example here is how the big five rated:
BigFive DeveloperCloud Demo V2
Openness 0.773834349 0.847273232
Conscientiousness 0.916616088 0.914907481
Extraversion 0.796331544 0.612606551
Agreeableness 0.17445636 0.096118648
Emotional range 0.036287447 0.01623536
thanks in advance!!
So the API version would not make a difference, as that just governs the format of the API; the back-end models are the same for both v2 and v3 of the API.
So the jist of your question is that when you run the same text in your app, and in the demo you get different big5 results, while the facet values are about the same.
This might be easiest solved by you opening a support ticket so we can debug the issue together; if you'd rather not do that then can you provide a sample text? Typically it boils down to a difference in the way the text is parsed.
Another question; did you try making the request using curl? That would cut out any custom logic in your app and narrow down the problem.
thanks Neil for you answer!
We tested the text using CURL and we noticed that the results didn't change by the service version used but instead by how the text was sent. If we called the service using curl passing a plain text input(formatted in UTF-8 with line breaks) it returned the same results for version2 and version 3 and also matched the ones from our demo. If we called the service using curl passing json input WITHOUT line breaks it returned the same values as well. But if we called the service passing the json input WITH line breaks then the results changed and almost matched those shown by ibm demo. My question here is which are the correct results? The ones shown when the text is sent as a plain text input(with line breaks) or when the text is sent as json input(with line breaks)? Is there any technical guideline besides the one shown in developercloud on how the text should be parsed to use this service?
Thanks again!
I want to make a network graph which shows the distribution of our documents in our folder structure.
I have the nodefile, edgefile and gephi graph file in this location:
https://1drv.ms/f/s!AuVfRBdVHkO7hgs5K9r9f7jBBAUH
What I do is:
Run the algorithm ForceAtlas2 with scaling 10-20, dissuade hub marked and prevent overlap marked, all other standard setting.
What I get is a graph with groups radial/spherical distributed. However, what I want is a tree directed network graph.
Anyone know how I can adjust Gephi to make this?
Thanks!
I just found a solution.
I tested the file format as shown on the Yed site "import excel file" page
http://yed.yworks.com/support/manual/import_excel.html
This gave me the Yed import dialog (took a life time to figure out that it's a pop up menu and not selectable through the standard menu)
Anyway, it worked and I've adjusted the test files with the data prepared for the Gehpi. This was pretty easy, I could used the source target ID's etc. Just copy paste.
I load it into Yed and used some directed and radial clustering algorithms on it. Works fine!
Below you can find the excel node/edge file used to import in Yed and the graph file you can open with Yed to see the final radial result.
https://1drv.ms/f/s!AuVfRBdVHkO7hg6DExK_eVkm5_mR
Only thing to figure out is how to combine the weight (which represents the number of documents) with the node size.
Unfortunately, as of version 0.9.0, Gephi no longer supports hierarchical graphs. Maybe try using a previous version?
Other alternatives involve more complex software, such as Graphviz, but you need a .dot file instead of your .csv. I looked all over, but could not find an easy-to-use csv to dot converter.
You could try looking at d3-hierarchy, a node.js program, but then again you need to use the not-so-user-friendly npm. If you look at the link, it looks like it can produce the kind of diagram you're looking for.
I'm increasingly using cfscript, and like it where appropriately used.
One problem is that there doesn't appear to be any code assist for cfscript in CF Builder, so I find myself writing the tag of a function to leverage the code Assist, then converting to cfscript (which is silly).
For example:
addParam() is the cfscript equivalent of <cfqueryparam >. I get code assist when writing the the tag version, but not the script equivalent.
Does anyone know if there is a code assist library available for cfscript in cfBuilder? Or is this just a downside of working with cfscript?
Many Thanks in advance!
Jason
Your example is not using native CFScript, it's using the hack-solution Adobe provided for some shortcomings of CFScript's coverage of CF tags, which are implemented as a bunch of CFCs in the custom tags dir of your install. This stuff is not representative of CFML & its CFScript support as a whole.
I find that CFB gives hinting for most native functionality... is this not the case for you? What if you try listAppend() for example? Do you get code-assist for that?
UPDATE
I wonder if you get a warning in CFB on your line equivalent to this:
o = new Query();
? I do, by default. I have to make a link to the CustomTags/com dir, and then use this syntax:
o = new com.adobe.Query();
Then I don't get a warning, and indeed I get the code assist you're expecting. I cannot get it to give me hinting on just the non-qualified path to Query.cfc though.
Not ideal. Or maybe I'm missing something, too.