I've just created an eID in Typo3. I can't figure out how to access the config data for my plugin from the Typo3 instance.
I've tried the code from the link but it doesn't want to work. I keep getting an exception "No TypoScript template found! " on the call " $TSFE->getConfigArray(); "
http://lists.typo3.org/pipermail/typo3-dev/2006-December/021392.html
Any ideas?
Thanks.
In eID mode, only a small part of the regular TYPO3 frontend is loaded. Unfortunately TypoScript is not loaded. To still access the TypoScript configuration you need manually load the components it needs to do so. Unfortunately this can be a bit of a pain in the butt. So in some cases it might be easier to just load a page containing a single plugin that doesn't contain anything else (without headers etc.).
If you do want to load the TypoScript templates yourself, you can try something like the following:
require_once(PATH_tslib.'class.tslib_fe.php');
require_once(PATH_t3lib.'class.t3lib_userauth.php' );
require_once(PATH_tslib.'class.tslib_feuserauth.php');
require_once(PATH_t3lib.'class.t3lib_cs.php');
require_once(PATH_tslib.'class.tslib_content.php') ;
require_once(PATH_t3lib.'class.t3lib_tstemplate.php');
require_once(PATH_t3lib.'class.t3lib_page.php');
$TSFEclassName = t3lib_div::makeInstanceClassName('tslib_fe');
$id = isset($HTTP_GET_VARS['id'])?$HTTP_GET_VARS['id']:0;
$GLOBALS['TSFE'] = new $TSFEclassName($TYPO3_CONF_VARS, $id, '0', 1, '','','','');
$GLOBALS['TSFE']->connectToMySQL();
$GLOBALS['TSFE']->initFEuser();
$GLOBALS['TSFE']->fetch_the_id();
$GLOBALS['TSFE']->getPageAndRootline();
$GLOBALS['TSFE']->initTemplate();
$GLOBALS['TSFE']->tmpl->getFileName_backPath = PATH_site;
$GLOBALS['TSFE']->forceTemplateParsing = 1;
$GLOBALS['TSFE']->getConfigArray();
$cObj = t3lib_div::makeInstance('tslib_cObj');
This initializes the TSFE and cObj but is also used to load and parse the TypoScript templates. You might need to make some modifications to (probably kick some things out)
The code came from one of the comments on the following blog post: http://sebastiaandejonge.com/blog/articles/2010/september/21/bringing-ajax-to-your-frontend-plugins/
Good luck!
Related
I get a project that used TYPO3 CMS, the task is quite simple, adding cookie usage notice on the header part of the website.
I never working on TYPO3 before, but already reading the documentation. Somehow I can't figure out which file to edit. even the documentation tutorial and file structure is different than the project I handle.
I don't have any project documentation for the project either, and I don't want to ask you to do my task, but I'm blank at the moment and don't know where to find the respective file needed.
Any suggestion or clue how to handle the issue?
my index.php on root folder look like this:
if (defined('E_DEPRECATED')) {
error_reporting(E_ALL ^ E_NOTICE ^ E_DEPRECATED);
} else {
error_reporting(E_ALL ^ E_NOTICE);
}
// ******************
// Constants defined
// ******************
define('PATH_thisScript', str_replace('//', '/', str_replace('\\', '/',
(PHP_SAPI == 'fpm-fcgi' || PHP_SAPI == 'cgi' || PHP_SAPI == 'isapi' || PHP_SAPI == 'cgi-fcgi') &&
($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) ?
($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) :
($_SERVER['ORIG_SCRIPT_FILENAME'] ? $_SERVER['ORIG_SCRIPT_FILENAME'] : $_SERVER['SCRIPT_FILENAME']))));
define('PATH_site', dirname(PATH_thisScript).'/');
if (#is_dir(PATH_site.'typo3/sysext/cms/tslib/')) {
define('PATH_tslib', PATH_site.'typo3/sysext/cms/tslib/');
} elseif (#is_dir(PATH_site.'tslib/')) {
define('PATH_tslib', PATH_site.'tslib/');
} else {
// define path to tslib/ here:
$configured_tslib_path = '';
// example:
// $configured_tslib_path = '/var/www/mysite/typo3/sysext/cms/tslib/';
define('PATH_tslib', $configured_tslib_path);
}
if (PATH_tslib=='') {
die('Cannot find tslib/. Please set path by defining $configured_tslib_path in ' . htmlspecialchars(basename(PATH_thisScript)) . '.');
}
// ******************
// include TSFE
// ******************
require (PATH_tslib.'index_ts.php');
edit: adding screenshot of the interface suggested by #Riccardo (typo3 ver 4.4.4)
Which version of TYPO3 are you running? As Bernd wrote, it is difficult to help you without further information.... I'll try to explain the first passages where you could gather some infos.
1) Access TYPO3 backend with a user with administrative privileges
2) Try to identify the main TypoScript template with this procedure:
click on template (1)
click on the "zero" page with the TYPO3 symbol (2)
you should see on the right a list of the TypoScript templates (3),
click on the one that is marked as "is Root"
2) After that, click on the first dropdown on the right area (with the "info/modify" item and select "TypoScript Object Browser" (a.k.a. TSOB)
3) After you have done that, you should see a "tree" that represents the TypoScript configuration;
be sure to have "setup" selected (1)
search for the object that builds your page, which should most likely be page = PAGE (2)
[answer edited]
I'm afraid I'll have to ask for a survey supplement
Can you identify in which part of the various objects the header of your site is rendered? My suspects would be focused on the [home2] or the [outer_frameset] object;
Hoping that they will contain the usual array with something like:
home2.10 = something
I think that the quickiest (and dirtiest) way to append something before the whole page would be something like
home2.1 = TEXT
home2.1.value = <div>whatever your message would be </div>
I don't know if you need something more complex than that...
Said that, I admit I never worked with frame inside TYPO3 and I think that the last time I did something with frames was...uh... maybe 9 years ago.
Don't change that index.php!!
As it is part of the core which gets overwritten on an update of TYPO3.
As there are very much options for configurating a page there can be no recipe matching all.
My best tip: get a TYPO3 profi to have a look into your installation so he can find which files are responsible for the page rendering and could include the cookie notice.
There also are some extensions which could render such a notice in your pages in a very easy way. But that all depends how your installation is configured. Nothing to say without further knowledge.
I would link to create a link to a frontend page inside a backend module.
Using:
<f:link.page pageUid="40" >Link</f:link.page>
Doesn't work. It generates a link to the current backend module.
Any solution ?
Since TYPO3 v9 you can use the following lines of code:
use TYPO3\CMS\Core\Site\SiteFinder;
use TYPO3\CMS\Core\Site\Entity\Site;
use TYPO3\CMS\Core\Routing\PageRouter;
$siteFinder = GeneralUtility::makeInstance(SiteFinder::class);
$site = $siteFinder->getSiteByPageId($pageId);
$router = $site->getRouter();
$frontendUrl = (string) $router->generateUri($pageId);
Thanks to Benni Mack # TYPO3Camp Mitteldeutschland
This is a very long story but the gist is: it is not possible to create FE links in BE/CLI context without a lot of workarounds and dummy objects/values.
If possible you should use solutions like pagepath which generate URLs for an eID script which performs the actual URL generation on demand.
If i do a mysql-select within the ts-setup and call the result of this select in, lets say, three extensions placed on the same site, does that still mean, that this certain mysql-select is done exactly once within each call of the site?
If so, it would be smarter to do the mysql-select in the typoscript and give the result to the extensions, so i dont have to do the same mysql-select over and over for each extension again, right?
Or is the text from the typoscript handled another way?
Thanx in advance,
Jayden
If that are exactly the same request, it will hopefully cached by mysql-query-cache. But, you are right, the request will be send three times.
If i understand you right, you think about doing sth. like:
lib.mySqlSelect = CONTENT
lib.mySqlSelect ...
plugin.tx_yourplugin.select.cObject < lib.mySqlSelect
That would result in three SQL Querys too.
But you could use an LOAD_REGISTER:
plugin.tx_yourplugin.select = {register:mySqlSelect}
plugin.tx_yourplugin.select.insertData = 1
page.1 = LOAD_REGISTER
page.1.mySqlSelect = CONTENT
page.1.mySqlSelect ...
Assuming "select" has stdWrap property.
If you are writing a new extension, you could use $GLOBALS['TSFE']->register[$register] = $theValue;
Due to some caching issues, I need to explicitly bypass the cache, for a specific module, if certain URL parameters are present. The workaround I've arrived at is to hack the render() function in libraries/joomla/document/html/renderer/module.php, along the lines of:
function render( $module, $params = array(), $content = null )
{
// Existing code:
$mod_params = new JParameter( $module->params );
// My hack:
if ($module->module == 'mod_foo')
{
if (certain URL parameters are present)
{
$mod_params->set('cache', 0);
}
}
...
}
Of course, hacking the core joomla code is a terrible idea, one which I'd like to avoid if at all possible. So, is there an appropriate hook I can plugin to in order to achieve the same? I don't think I can do anything at the module level, since it won't even be inspected if the renderer has already decided to fetch it from cache.
To answer the first question no there isn't a module render event, here's the plugin doc's and the list of events in Joomla!
Turn off caching for your module.
See this article on The Art Of Joomla, additional articles you could look at:
Using Cache to Speed Up your code
JCache API
I tried to ask this once, but I think that my former question was too unclear for you guys to answer, so I'll try again
I'm making a website using the Zend Framework, and am trying to include the premade messageboard Phorum. So far, I've made it work by not running it through my bootstrap using my .htaccess file. What I'd like to do i'd like to do is to be able to run it through my bootstrap so that I can use my previously created Layouts and Classes that I can only run through Zend.
For example, I have a premade sign in system that works through Zend_Auth. I have the person's data saved in Zend_Session. I load the user's profile through a controller. I have a service layer for the model that connects to my database on behalf of the user. There are several other dependencies that, as far as I can tell, I need the bootstrap for.
Phorum is basically just a large set of PHP scripts that are dependent on GET parameters. My original idea had been to use a controller to render the scripts. An example of what that URI would look like is this: My-Site.com/messageboard/list.php?1,3 with messageboard being the messageboardController. While this works for loading list, it can't capture the GET parameters, which Phorum is dependent on. Due to the complex nature of Phorum, it would be nearly impossible for me to be able to go in and make it something like My-Site.com/messageboard/list/1/3 or anything along those lines. The URI has to be the former, as it is built in to Phorum.
I have tried using frames. I got to keep my log in panel up top, and had the body of the page be a frame, but it was unbookmarkable, and the back button made everything outrageously difficult. I also couldn't get the frame to talk to the parent page in Zend well, so frames aren't an option.
Does anyone have a way that I can do this? What I need, in essence, is to take the script (ex. list.php?1,3) and place whatever it would render, after having used the 1,3 parameters, into a div in the "body" div of my layout. As far as I can tell, render doesn't seem to be able to capture the GET parameters. Does anyone know of a way I can do this.
Any ideas would be immeasurably appreciated. Thank you for your help!
This isn't a trivial thing to process, however, it is possible to write a custom route, along with some controller magic to handle this sort of thing and include the proper php file:
First of all - Your route should probably be (in ZF1.9 application.ini conventions)
resources.router.routes.phorum.type = "Zend_Controller_Router_Route_Regex"
resources.router.routes.phorum.route = "messageboard(?:/(.*))?"
resources.router.routes.phorum.defaults.controller = "phorum"
resources.router.routes.phorum.defaults.action = "wrapper"
resources.router.routes.phorum.defaults.module = "default"
resources.router.routes.phorum.defaults.page = "index.php"
resources.router.routes.phorum.map.1 = "page"
Now all requests to messageboard/whatever.php should be routed to PhorumController::wrapperAction() and have 'whatever.php' in $this->getRequest()->getParam('page')
Then it should become a simple matter of redirecting your "wrapper" action to include the proper php file from phorum. I have added some code from a similar controller I have (although mine didn't include php files - it was meant solely for serving a directory of content)
public function wrapperAction() {
$phorumPath = APPLICATION_PATH."../ext/phorum/";
$file = realpath($phorumPath . $this->getRequest()->getParam('page');
if (!$file || !is_file($file)) throw new Exception("File not found");
// disable default viewRenderer - layout should still render at this point
$this->_helper->viewRenderer->setNoRender(true);
// determine extension to determine mime-type
preg_match("#\.([^.]+)$#", $filename, $matches);
switch (strtolower($matches[1]))
{
case "php":
// patch the request over to phorum
include($file);
return; // exit from the rest of the handler, which deals specifically
// with other types of files
case "js":
$this->getResponse()->setHeader('Content-Type', 'text/javascript');
ini_set('html_errors', 0);
break;
case "css":
$this->getResponse()->setHeader('Content-Type', 'text/css');
ini_set('html_errors', 0);
break;
case "html":
$this->getResponse()->setHeader('Content-Type', 'text/html');
break;
// you get the idea... add any others like gif/etc that may be needed
default:
$this->getResponse()->setHeader('Content-Type', 'text/plain');
ini_set('html_errors', 0);
break;
}
// Disable Layout
$this->_helper->layout->disableLayout();
// Sending 304 cache headers if the file hasn't changed can be a bandwidth saver
$mtime = filemtime($fn);
if ($modsince = $this->getRequest()->getServer('HTTP_IF_MODIFIED_SINCE'))
{
$modsince = new Zend_Date($modsince);
$modsince = $modsince->getTimestamp();
if ($mtime <= $modsince) {
$this->getResponse()->setHttpResponseCode(304);
return;
}
}
$this->getResponse()->setHeader('Last-Modified', gmdate("D, d M Y H:i:s",$mtime). " GMT");
readfile($fn);
}
Please - Make sure to test this code for people trying to craft requests with .., etc in the page.