I'm trying to figure out how to use autoconf to get the operating system, but whenever I try to use AC_CANONICAL_HOST, it just gives me this error: configure: error: cannot find install-sh, install.sh, or shtool in "." "./.." "./../.."
autoreconf -fvi will get automake to write install-sh.
Related
I am trying to install libDAI-0.3.2 in Ubuntu 14.04. I need to use it with MATLAB.
I made following changes :
In Makefile.conf:
CC=g++-4.7
MEXFLAGS:=CXX=#$(CC) CXXFLAGS#'$(CCFLAGS)'
In Makefile.ALL: WITH_MATLAB=true
Since default compiler in Ubuntu 14.04 is gcc 4.8.4, I installed gcc-4.7 and g++4.7.
Still I get the following compilation error:
libDAI-0.3.2$ make
/usr/local/MATLAB/R2015a/bin/mex -Iinclude CXX= -largeArrayDims -lgmpxx -lgmp -output matlab/dai.mexa64 src/matlab/dai.cpp src/matlab/matlab.cpp src/graph.cpp src/dag.cpp src/bipgraph.cpp src/varset.cpp src/daialg.cpp src/alldai.cpp src/clustergraph.cpp src/factor.cpp src/factorgraph.cpp src/properties.cpp src/regiongraph.cpp src/cobwebgraph.cpp src/util.cpp src/weightedgraph.cpp src/exceptions.cpp src/exactinf.cpp src/evidence.cpp src/emalg.cpp src/io.cpp src/bp.cpp src/fbp.cpp src/trwbp.cpp src/mf.cpp src/hak.cpp src/lc.cpp src/treeep.cpp src/jtree.cpp src/mr.cpp src/gibbs.cpp src/bbp.cpp src/cbp.cpp src/bp_dual.cpp src/decmap.cpp src/glc.cpp
Building with 'g++'.
/tmp/mex_11282758003780_5023: -c: not found
make: *** [matlab/dai.mexa64] Error 255
what does this mean? Any idea how to fix this?
Thanks & Regards,
Swagatika
Try replacing
MEXFLAGS:=CXX=#$(CC) CXXFLAGS#'$(CCFLAGS)'
with
MEXFLAGS:=CXX=$(CC) CXXFLAGS='$(CCFLAGS)'
MEXFLAGS:=CXX=$(CC) CXXFLAGS='$(CCFLAGS)' replace this
I am trying to compile PJSIP on Ubuntu according to this document:
http://supportforums.blackberry.com/t5/Native-Development/Porting-PJSIP-PJMEDIA-and-PJLIB-to-BlackBerry-10/ta-p/2085751
When I am executing this command: ./buildpjsip (it's on number 8 in document), it is showing these errors:
cp: cannot create regular file /x86/lib': No such file or directory
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
checking build system type... i686-pc-linux-gnu
checking host system type... i486-pc-nto-qnx8.0.0
checking target system type... i486-pc-nto-qnx8.0.0
checking for i486-pc-nto-qnx8.0.0-gcc... no
checking for gcc... gcc
checking whether the C compiler works... no
aconfigure: error: in `/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk':
aconfigure: error: C compiler cannot create executables
See `config.log' for more details
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
adding: libopencore-amrwb.a (deflated 67%) adding: libopencore-amrnb.a (deflated 70%)
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts*
I also encountered the issue before and solved it successfully. I think what results in the issue is that, after you executed the step 4 in the document: Execute bbndk-env.bat or bbndk-env.sh from the root of your installation of the Native SDK. You shouldn't close the command prompt or open a new terminal. I mean you should execute the rest steps in the same terminal, then you will build the library successfully. Also, you had better ensure your gcc is the newest version. Good luck for you.
You could try first:
$ cd bb10-pjsipdemo/pjbuildscripts/pjsip-checkout/trunk
$ ./configure
$ touch pjlib/include/pj/config_site.h
$ make dep
$ make
Reference: http://www.pjsip.org/pjlib/docs/html/pjlib_build_sys_pg.htm
And then run bb10-pjsipdemo/pjbuildscripts/buildpjsip
When I try to install Net::SSL I get the following output. I don't understad it at all. Can anyone point me in the right direction, without getting to techy?
C:\Documents and Settings\Administrator>cpan
CPAN: File::HomeDir loaded ok (v0.69)
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support enabled
cpan> install Net::SSL
Database was generated on Tue, 14 Aug 2012 14:54:56 GMT
Running install for module 'Net::SSL'
Running make for N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
Checksum for C:\strawberry\cpan\sources\authors\id\N\NA\NANIS\Crypt-SSLeay-0.64.
tar.gz ok
Scanning cache C:\strawberry\cpan\build for sizes
............................................................................DONE
CPAN.pm: Going to build N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
The test suite can attempt to connect to public servers to ensure that the
code is working properly. If you are behind a strict firewall or have no
network connectivity, these tests may fail (through no fault of the code).
Do you want to run the live tests (y/N)? [N]
WARNING: BUILD_REQUIRES is not a known parameter.
Checking if your kit is complete...
Looks good
Warning: prerequisite LWP::Protocol::https 6.02 not found.
'BUILD_REQUIRES' is not a known MakeMaker parameter name.
Writing Makefile for Crypt::SSLeay
cp lib/Crypt/SSLeay/X509.pm blib\lib\Crypt\SSLeay\X509.pm
cp lib/Net/SSL.pm blib\lib\Net\SSL.pm
cp SSLeay.pm blib\lib\Crypt\SSLeay.pm
cp lib/Crypt/SSLeay/Conn.pm blib\lib\Crypt\SSLeay\Conn.pm
cp lib/Crypt/SSLeay/CTX.pm blib\lib\Crypt\SSLeay\CTX.pm
cp lib/Crypt/SSLeay/MainContext.pm blib\lib\Crypt\SSLeay\MainContext.pm
cp lib/Crypt/SSLeay/Err.pm blib\lib\Crypt\SSLeay\Err.pm
C:\strawberry\perl\bin\perl.exe C:\strawberry\perl\lib\ExtUtils\xsubpp -typemap
C:\strawberry\perl\lib\ExtUtils\typemap -typemap typemap SSLeay.xs > SSLeay.xs
c && C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e mv SSLeay.xsc SSLeay
.c
gcc -c -IC:\strawberry\c\include -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_
IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-s -O2 -DVERSION=\"0.64\" -DXS_VERSION=\"0.64\" "-IC:\strawberry\perl\lib
\CORE" SSLeay.c
SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
SSLeay.xs:37:25: openssl/err.h: No such file or directory
SSLeay.xs:38:26: openssl/rand.h: No such file or directory
SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
SSLeay.xs:55: error: syntax error before '*' token
SSLeay.xs: In function `InfoCallback':
SSLeay.xs:60: error: `where' undeclared (first use in this function)
SSLeay.xs:60: error: (Each undeclared identifier is reported only once
SSLeay.xs:60: error: for each function it appears in.)
SSLeay.xs:60: error: `SSL_ST_MASK' undeclared (first use in this function)
SSLeay.xs:62: error: `SSL_ST_CONNECT' undeclared (first use in this function)
SSLeay.xs:64: error: `SSL_ST_ACCEPT' undeclared (first use in this function)
SSLeay.xs:69: error: `SSL_CB_LOOP' undeclared (first use in this function)
SSLeay.xs:70: error: `s' undeclared (first use in this function)
SSLeay.xs:72: error: `SSL_CB_ALERT' undeclared (first use in this function)
SSLeay.xs:73: error: `SSL_CB_READ' undeclared (first use in this function)
SSLeay.xs:75: error: `ret' undeclared (first use in this function)
SSLeay.xs:78: error: `SSL_CB_EXIT' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_new':
SSLeay.c:146: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_use_pkcs12_file':
SSLeay.c:334: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c:334: error: `ctx' undeclared (first use in this function)
SSLeay.xs:188: error: `EVP_PKEY' undeclared (first use in this function)
SSLeay.xs:188: error: `pkey' undeclared (first use in this function)
SSLeay.c:421: error: `ctx' undeclared (first use in this function)
SSLeay.c:646: error: `ssl' undeclared (first use in this function)
SSLeay.c:658: error: syntax error before ')' token
LOTS OF LINES SIMILAR TO ABOVE
SSLeay.xs:505: error: invalid type argument of `->'
dmake.EXE: Error code 129, while making 'SSLeay.o'
NANIS/Crypt-SSLeay-0.64.tar.gz
C:\strawberry\c\bin\dmake.EXE -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
NANIS/Crypt-SSLeay-0.64.tar.gz : make NO
I had the same problem and, although I had the openSSL package installed, the development headers where not. I had to install the package libssl-dev. I used the Ubuntu Software Center to download and install the package. Alternately, you could use sudo apt-get install libssl-dev from the terminal command line.
That fixed my problem but is no real help to you working with windows. openSSL has a link to a binary for windows at: OpenSSL for Windows
The following lines suggest that you probably have not installed the OpenSSL library/headers or it is in a location not known to perl. Install it with the package manager of your operating system, or compile and install it.
>SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
>SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
>SSLeay.xs:37:25: openssl/err.h: No such file or directory
>SSLeay.xs:38:26: openssl/rand.h: No such file or directory
>SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
After installing the library/headers, cpan should be able to make and install Net::SSL.
Generally CPAN takes care of this for you by installing all the dependent modules.
The problem you are facing is with this warning
WARNING: BUILD_REQUIRES is not a known parameter.
Now since CPAN is unable to read this parameter it is unable to get all the dependent modules for you and hence is unable to install.
The Problem may be with the perl-ExtUtils-MakeMaker module with comes with cpan utility.
You may want to install the latest version of cpan and try. Or as previously mentioned You may want to install all the modules after downloading them individually and then installing them manually.
First, I have got the problem like this:
mod_qos.c:83:26: error: openssl/rand.h: No such file or directory
mod_qos.c:84:25: error: openssl/evp.h: No such file or directory
Then I used the following:
apxs -I/usr/local/openssl/include/openssl -i -c mod_qos.c -lcrypto -lpcre
and it succeeded! Why?
Okay i am trying to install BIND on solaris 11.
Upon downloading the tar file using wget, then i used extract it out.
After which, when i enter the command :
./configure
i face the following error
checking <<some stuff>>
..
..
..
checking <<some stuff>>
checking whether we are cross compiling... configure: error: in '/home/user/user/downloads/bind9.8.2
configure: error: cannot run C compiled programs.
If you meant to cross compile, use '--host'.
so i used --host in my option, but i cant get it to work,
For example, i entered the below command :
./configure --host=ulinux-uclibc
I received an error saying
checking host system type... Invalid configuration 'ulinux-uclibc': machine 'ulinux' not recognized
Thanks! :)
Why not just install the bind package from your configured solaris publisher?
# pkg install network/dns/bind service/network/dns/bind
should get you exactly what you need. That will get you ISC Bind v9.6.3 if you use pkg.oracle.com/solaris/release publisher.
I've been trying to Cross Compile Perl-5.14.2 for NetBSD target from Linux machine.
Configure script successfully invoked with following options,
./Configure -des -Dusecrosscompile
-Dtargetarch=netbsd
-Dosvers=3.0.0
-Dtargethost=10.184.22.48
-Dtargetuser=username
-Dusrinc=.../sb1-mips/usr/include
-Dlibpth=.../xc-sb1-mips/netbsd/Lib/lib
-Dcc=.../mips64-netbsdelf-gcc
Once after Configured, make wasn't successful.
It breaks at different places right from creating miniperlmain.o file.
For example following error occurred while generating gv.o file:
gv.c: In function `Perl_try_amagic_un':
gv.c:2018: error: void value not ignored as it ought to be
gv.c:2029: error: void value not ignored as it ought to be
gv.c:2029: warning: cast from pointer to integer of different size
gv.c: In function `Perl_try_amagic_bin':
gv.c:2061: error: void value not ignored as it ought to be
gv.c:2063: error: void value not ignored as it ought to be
make: *** [gv.o] Error 1
Now to get rid of these errors I've passed two flags namely -DPERL_IMPLICIT_CONTEXT and -DPERL_GCC_BRACE_GROUPS_FORBIDDEN to C Compiler CCFLAGS which solved the problem.
Since it is a custom build, want to know about all of the CCFLAGS that have to be passed in order to achieve a successful build?
What does each flag mean?
Is their any documentation available?
Use vagrant. It has some OpenBSD and FreeBSD images. Hopefuly those will be compatible with NetBSD.
You can get a build environment very fast with that. Then you can transfer and build your code happily :)