I am trying to compile PJSIP on Ubuntu according to this document:
http://supportforums.blackberry.com/t5/Native-Development/Porting-PJSIP-PJMEDIA-and-PJLIB-to-BlackBerry-10/ta-p/2085751
When I am executing this command: ./buildpjsip (it's on number 8 in document), it is showing these errors:
cp: cannot create regular file /x86/lib': No such file or directory
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
checking build system type... i686-pc-linux-gnu
checking host system type... i486-pc-nto-qnx8.0.0
checking target system type... i486-pc-nto-qnx8.0.0
checking for i486-pc-nto-qnx8.0.0-gcc... no
checking for gcc... gcc
checking whether the C compiler works... no
aconfigure: error: in `/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build/trunk':
aconfigure: error: C compiler cannot create executables
See `config.log' for more details
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
Makefile:1: build.mak: No such file or directory
Makefile:2: build/host-.mak: No such file or directory
make: *** No rule to make target `build/host-.mak'. Stop.
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts/pjsip-build /home/ahsish/bb10-pjsipdemo-master/pjbuildscripts
adding: libopencore-amrwb.a (deflated 67%) adding: libopencore-amrnb.a (deflated 70%)
/home/ahsish/bb10-pjsipdemo-master/pjbuildscripts*
I also encountered the issue before and solved it successfully. I think what results in the issue is that, after you executed the step 4 in the document: Execute bbndk-env.bat or bbndk-env.sh from the root of your installation of the Native SDK. You shouldn't close the command prompt or open a new terminal. I mean you should execute the rest steps in the same terminal, then you will build the library successfully. Also, you had better ensure your gcc is the newest version. Good luck for you.
You could try first:
$ cd bb10-pjsipdemo/pjbuildscripts/pjsip-checkout/trunk
$ ./configure
$ touch pjlib/include/pj/config_site.h
$ make dep
$ make
Reference: http://www.pjsip.org/pjlib/docs/html/pjlib_build_sys_pg.htm
And then run bb10-pjsipdemo/pjbuildscripts/buildpjsip
Related
I want to setup a private tangle on my own virtual machine with Ubuntu 18.04, 4GB RAM and 20GB memory.
I have follow this instructions: https://docs.iota.org/docs/compass/0.1/how-to-guides/set-up-a-private-tangle. Every command works fine until reach this one: bazel run //docker:layers_calculator.
It shows an error as follows:
Starting local Bazel server and connecting to it...
ERROR: /home/istabraq/compass/third-party/maven_deps.bzl:3:5: Traceback (most recent call last):
File "/home/istabraq/compass/WORKSPACE", line 42
maven_jars()
File "/home/istabraq/compass/third-party/maven_deps.bzl", line 3, in maven_jars
native.maven_jar(<4 more arguments>)
type 'struct' has no method maven_jar()
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
INFO: Elapsed time: 4.743s
INFO: 0 processes.
FAILED: Build did NOT complete successfully (0 packages loaded)
FAILED: Build did NOT complete successfully (0 packages loaded)
How can I solve this problem? what I have missed?
read carefully the message given after running bazel installer:
Make sure you have "/home/yourusername/bin" in your path. You can also activate bash completion by adding the following line to your :
source /home/yourusername/.bazel/bin/bazel-complete.bash
You can check with: "bazel info" or "bazel version"
Unfortunately, there are further errors:
https://github.com/iotaledger/compass/issues/142
I have solve this issue by using this commands:
Step 3: Set up your environment
If you ran the Bazel installer with the --user flag as above, the Bazel executable is installed in your $HOME/bin directory. It’s a good idea to add this directory to your default paths, as follows:
export PATH="$PATH:$HOME/bin"
You can also add this command to your ~/.bashrc or ~/.zshrc file to make it permanent.
reference:
https://docs.bazel.build/versions/master/install-ubuntu.html
I have tried continuously to install fltk into cygwin with no luck. I have been successful to install it to msys but i cant use msys in netbeans and i personally prefer cygwin.
-->After i have extracted the FLTK 1.3.2 tar file
-->I ran this in cygwin in the fltk directory (c:/fltk/)
sh configure --prefix=/usr/local/fltk --enable-localjpeg --enable-localzlib --enable-localpng
--> When i run make after the previous input, I get this:
Archiving ../lib/libfltk_jpeg.a...
process_begin: CreateProcess(NULL, /cygdrive/c/MinGW/bin/ar cr ../lib/libfltk_jpeg.a jaricom.o jcapimin.o jcapistd.o jcarith.o jccoefct.o jccolor.o jcdctmgr.o jchuff.o jcinit.o jcmainct.o jcmarker.o jcmaster.o jcomapi.o jcparam.o jcprepct.o jcsample.o jctrans.o jdapimin.o jdapistd.o jdarith.o jdatadst.o jdatasrc.o jdcoefct.o jdcolor.o jddctmgr.o jdhuff.o jdinput.o jdmainct.o jdmarker.o jdmaster.o jdmerge.o jdpostct.o jdsample.o jdtrans.o jerror.o jfdctflt.o jfdctfst.o jfdctint.o jidctflt.o jidctfst.o jidctint.o jmemmgr.o jmemnobs.o jquant1.o jquant2.o jutils.o, ...) failed.
make (e=2): The system cannot find the file specified.
make[1]: *** [../lib/libfltk_jpeg.a] Error 2
make: *** [all] Error 1
Cygwin already has FLTK. Use the Cygwin installer, find the package, and install it.
I am doing an iphone app, were my code works fine with out any error, but when i build the code its failing. and i am getting an error like
rsync: rename "/Users/pcmac/Desktop/Digidrive(IPhone)/Build/RestKit/Support/.svn/.format.0FKOPh" -> "RestKit/Support/.svn/format": Operation not permitted (1)
I am getting this error many at a time and finally says:
Command /bin/sh failed with exit code 23
Can anyone give me solution to solve this ?
It seems you've added RestKit via Subversion (SVN). Is this really what you want? Why not get this dependency from CocoaPods or donwload it from RestKit.org as a source package?
I'd suspect the file permissions on .svn/.format.OFKOPh; to check them:
open a terminal window
change to the .svn dir:
cd /Users/pcmac/Desktop/Digidrive(IPhone)/Build/RestKit/Support/.svn/
check permissions:
ls -la .format*
if the permissions are wrong (i.e. you are not allowed to move the file):
chmod 644 .format.OFKOPh
Okay i am trying to install BIND on solaris 11.
Upon downloading the tar file using wget, then i used extract it out.
After which, when i enter the command :
./configure
i face the following error
checking <<some stuff>>
..
..
..
checking <<some stuff>>
checking whether we are cross compiling... configure: error: in '/home/user/user/downloads/bind9.8.2
configure: error: cannot run C compiled programs.
If you meant to cross compile, use '--host'.
so i used --host in my option, but i cant get it to work,
For example, i entered the below command :
./configure --host=ulinux-uclibc
I received an error saying
checking host system type... Invalid configuration 'ulinux-uclibc': machine 'ulinux' not recognized
Thanks! :)
Why not just install the bind package from your configured solaris publisher?
# pkg install network/dns/bind service/network/dns/bind
should get you exactly what you need. That will get you ISC Bind v9.6.3 if you use pkg.oracle.com/solaris/release publisher.
I'm trying to setup nodejs to access a postgres database. What I've done so far is the following (https://gist.github.com/579814):
echo 'export PATH=$HOME/local/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
mkdir ~/local
mkdir ~/node-latest-install
cd ~/node-latest-install
curl http://nodejs.org/dist/node-latest.tar.gz | tar xz --strip-components=1
./configure --prefix=~/local
make install # ok, fine, this step probably takes more than 30 seconds...
curl http://npmjs.org/install.sh | sh
then
git clone git://github.com/isaacs/npm.git
make
make install
so far, so good. However, when I try to install the postgres driver
npm install pg
I get the following:
node-waf configure build || true
Checking for program g++ or c++ : /usr/bin/g++
Checking for program cpp : /usr/bin/cpp
Checking for program ar : /usr/bin/ar
Checking for program ranlib : /usr/bin/ranlib
Checking for g++ : ok
Checking for node path : not found
Checking for node prefix : ok /usr/local
Checking for program pg_config : /usr/bin/pg_config
'configure' finished successfully (0.066s)
Waf: Entering directory `/home/christian/node_modules/pg/build'
[1/2] cxx: src/binding.cc -> build/default/src/binding_1.o
../src/binding.cc:3:25: fatal error: node_events.h: No such file or directory
compilation terminated.
Waf: Leaving directory `/home/christian/node_modules/pg/build'
Build failed: -> task failed (err #1):
{task: cxx binding.cc -> binding_1.o}
I've been looking around for setting the node path, although haven't found anything of help so far - probably also because I'm totally new to nodejs, so I'd be happy about any hint.
Now, you have NodeJS installed in your Ubuntu. You should set /etc/environment and load nodeJS path that can be executed by another users. For example:
NODE="/home/ubuntu/local/node"
NODE_PATH="/usr/local/lib/node_modules"
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:$NODE/bin:$NODE/lib/node_modules"
#PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
Do this in bash:
echo 'export NODE_PATH=~/local/:~/local/node_modules' >> ~/.bashrc
before things are fixed you must use node 0.5.1 (you can use gitk to revert the tree to this version)
Auteur: Ryan Dahl <ry#tinyclouds.org> 2011-07-19 10:46:38
Auteur du commit: Ryan Dahl <ry#tinyclouds.org> 2011-07-19 10:46:38
Parent: 0a3fc1d9c8becc32c63ae736ca2b3719a3d03c5b (Remove StatWatcher's dep on C++ EventEmitter)
Enfant: 061ce7b0ac370c8a5ae93d95ab7da171cbd488f0 (net_uv: Fix simple/test-http-expect-continue.js)
Branche: master, remotes/origin/master
Suit: v0.5.1
Précède: v0.5.2
Finally remove node::EventEmitter
I had the same problem.
The issue was that I was specifying a old version of PG in my package.js
After I removed the old version dependancy I was able to install PG without issue.