When I try to install Net::SSL I get the following output. I don't understad it at all. Can anyone point me in the right direction, without getting to techy?
C:\Documents and Settings\Administrator>cpan
CPAN: File::HomeDir loaded ok (v0.69)
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support enabled
cpan> install Net::SSL
Database was generated on Tue, 14 Aug 2012 14:54:56 GMT
Running install for module 'Net::SSL'
Running make for N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
Checksum for C:\strawberry\cpan\sources\authors\id\N\NA\NANIS\Crypt-SSLeay-0.64.
tar.gz ok
Scanning cache C:\strawberry\cpan\build for sizes
............................................................................DONE
CPAN.pm: Going to build N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
The test suite can attempt to connect to public servers to ensure that the
code is working properly. If you are behind a strict firewall or have no
network connectivity, these tests may fail (through no fault of the code).
Do you want to run the live tests (y/N)? [N]
WARNING: BUILD_REQUIRES is not a known parameter.
Checking if your kit is complete...
Looks good
Warning: prerequisite LWP::Protocol::https 6.02 not found.
'BUILD_REQUIRES' is not a known MakeMaker parameter name.
Writing Makefile for Crypt::SSLeay
cp lib/Crypt/SSLeay/X509.pm blib\lib\Crypt\SSLeay\X509.pm
cp lib/Net/SSL.pm blib\lib\Net\SSL.pm
cp SSLeay.pm blib\lib\Crypt\SSLeay.pm
cp lib/Crypt/SSLeay/Conn.pm blib\lib\Crypt\SSLeay\Conn.pm
cp lib/Crypt/SSLeay/CTX.pm blib\lib\Crypt\SSLeay\CTX.pm
cp lib/Crypt/SSLeay/MainContext.pm blib\lib\Crypt\SSLeay\MainContext.pm
cp lib/Crypt/SSLeay/Err.pm blib\lib\Crypt\SSLeay\Err.pm
C:\strawberry\perl\bin\perl.exe C:\strawberry\perl\lib\ExtUtils\xsubpp -typemap
C:\strawberry\perl\lib\ExtUtils\typemap -typemap typemap SSLeay.xs > SSLeay.xs
c && C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e mv SSLeay.xsc SSLeay
.c
gcc -c -IC:\strawberry\c\include -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_
IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-s -O2 -DVERSION=\"0.64\" -DXS_VERSION=\"0.64\" "-IC:\strawberry\perl\lib
\CORE" SSLeay.c
SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
SSLeay.xs:37:25: openssl/err.h: No such file or directory
SSLeay.xs:38:26: openssl/rand.h: No such file or directory
SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
SSLeay.xs:55: error: syntax error before '*' token
SSLeay.xs: In function `InfoCallback':
SSLeay.xs:60: error: `where' undeclared (first use in this function)
SSLeay.xs:60: error: (Each undeclared identifier is reported only once
SSLeay.xs:60: error: for each function it appears in.)
SSLeay.xs:60: error: `SSL_ST_MASK' undeclared (first use in this function)
SSLeay.xs:62: error: `SSL_ST_CONNECT' undeclared (first use in this function)
SSLeay.xs:64: error: `SSL_ST_ACCEPT' undeclared (first use in this function)
SSLeay.xs:69: error: `SSL_CB_LOOP' undeclared (first use in this function)
SSLeay.xs:70: error: `s' undeclared (first use in this function)
SSLeay.xs:72: error: `SSL_CB_ALERT' undeclared (first use in this function)
SSLeay.xs:73: error: `SSL_CB_READ' undeclared (first use in this function)
SSLeay.xs:75: error: `ret' undeclared (first use in this function)
SSLeay.xs:78: error: `SSL_CB_EXIT' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_new':
SSLeay.c:146: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_use_pkcs12_file':
SSLeay.c:334: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c:334: error: `ctx' undeclared (first use in this function)
SSLeay.xs:188: error: `EVP_PKEY' undeclared (first use in this function)
SSLeay.xs:188: error: `pkey' undeclared (first use in this function)
SSLeay.c:421: error: `ctx' undeclared (first use in this function)
SSLeay.c:646: error: `ssl' undeclared (first use in this function)
SSLeay.c:658: error: syntax error before ')' token
LOTS OF LINES SIMILAR TO ABOVE
SSLeay.xs:505: error: invalid type argument of `->'
dmake.EXE: Error code 129, while making 'SSLeay.o'
NANIS/Crypt-SSLeay-0.64.tar.gz
C:\strawberry\c\bin\dmake.EXE -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
NANIS/Crypt-SSLeay-0.64.tar.gz : make NO
I had the same problem and, although I had the openSSL package installed, the development headers where not. I had to install the package libssl-dev. I used the Ubuntu Software Center to download and install the package. Alternately, you could use sudo apt-get install libssl-dev from the terminal command line.
That fixed my problem but is no real help to you working with windows. openSSL has a link to a binary for windows at: OpenSSL for Windows
The following lines suggest that you probably have not installed the OpenSSL library/headers or it is in a location not known to perl. Install it with the package manager of your operating system, or compile and install it.
>SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
>SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
>SSLeay.xs:37:25: openssl/err.h: No such file or directory
>SSLeay.xs:38:26: openssl/rand.h: No such file or directory
>SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
After installing the library/headers, cpan should be able to make and install Net::SSL.
Generally CPAN takes care of this for you by installing all the dependent modules.
The problem you are facing is with this warning
WARNING: BUILD_REQUIRES is not a known parameter.
Now since CPAN is unable to read this parameter it is unable to get all the dependent modules for you and hence is unable to install.
The Problem may be with the perl-ExtUtils-MakeMaker module with comes with cpan utility.
You may want to install the latest version of cpan and try. Or as previously mentioned You may want to install all the modules after downloading them individually and then installing them manually.
First, I have got the problem like this:
mod_qos.c:83:26: error: openssl/rand.h: No such file or directory
mod_qos.c:84:25: error: openssl/evp.h: No such file or directory
Then I used the following:
apxs -I/usr/local/openssl/include/openssl -i -c mod_qos.c -lcrypto -lpcre
and it succeeded! Why?
Related
What should I change in order to install the module? php is 5.3.3 withyum install php-devel in place.
PHP.c: In function ‘PHP_set_php_input’:
PHP.c:818: warning: passing argument 2 of ‘Perl_sv_2pv_flags’ from incompatible pointer type
/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/proto.h:3931: note: expected ‘STRLEN * const’ but argument is of type ‘int *’
cc -c -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -Wall -O2 -DVERSION=\"0.15\" -DXS_VERSION=\"0.15\" -fPIC "-I/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE" array.c
In file included from /usr/include/php/main/php.h:33,
from /usr/include/php/sapi/embed/php_embed.h:23,
from PHP.h:14,
from array.c:9:
/usr/include/php/main/php_config.h:2417:1: warning: "_GNU_SOURCE" redefined
In file included from /home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/perl.h:28,
from PHP.h:9,
from array.c:9:
/home/mpapec/.plenv/versions/5.20.0/lib/perl5/5.20.0/x86_64-linux/CORE/config.h:1825:1: warning: this is the location of the previous definition
rm -f blib/arch/auto/PHP/PHP.so
cc -shared -O2 -L/usr/local/lib -fstack-protector PHP.o array.o -o blib/arch/auto/PHP/PHP.so \
\
chmod 755 blib/arch/auto/PHP/PHP.so
"/home/mpapec/.plenv/versions/5.20.0/bin/perl5.20.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- PHP.bs blib/arch/auto/PHP/PHP.bs 644
Manifying 1 pod document
Running Mkbootstrap for PHP ()
chmod 644 "PHP.bs"
PERL_DL_NONLAZY=1 "/home/mpapec/.plenv/versions/5.20.0/bin/perl5.20.0" "-Iblib/lib" "-Iblib/arch" test.pl
1..79
not ok 1 - use_ok PHP
# Failed test 'use_ok PHP'
# at test.pl line 11.
not ok 2 - require PHP;
# Failed test 'require PHP;'
# at test.pl line 18.
# Tried to require 'PHP'.
# Error: Attempt to reload PHP.pm aborted.
# Compilation failed in require at (eval 6) line 2.
not ok 3 - eval
# Failed test 'eval'
# at test.pl line 49.
Module PHP failed to load at blib/lib/PHP.pm line 80.
Module PHP failed to load at blib/lib/PHP.pm line 80.
END failed--call queue aborted at test.pl line 50.
# Looks like you planned 79 tests but ran 3.
# Looks like you failed 3 tests of 3 run.
# Looks like your test exited with 22 just after 3.
make: *** [test_dynamic] Error 22
-> FAIL Installing PHP failed. See /home/mpapec/.cpanm/work/1440522239.12833/build.log for details. Retry with --force to force install it.
(
PHP is kind of fragile. It probably won't work out of the box with your system php installation, and may have trouble with 64-bit or multi-threaded versions of perl.
I have only ever gotten it to work on Linux. The latest version I have tried to use is 5.3.8 (back in 2013), though I remember things going smoothly from 5.2.x to 5.3.8.
I always build php from source, with this configuration:
./configure --enable-embed --with-zlib --with-openssl --with-mysql \
--with-libdir=lib/i386-linux-gnu
--enable-embed is absolutely required, as the pod mentions, to build a PHP interpreter with the SAPI extension, and which then allows perl to manipulate the PHP interpreter through XS code. The other extensions were for other requirements of my project; they may be optional, but I haven't experimented with building the PHP interpreter or the PHP module with any other configuration. The pod also says to never use the --with-apxs argument, which I was never tempted to do anyway.
The build process of the PHP module will look for and require a program called php-config. You may need to hack your $PATH, if only during the build process, so that the PHP module runs the correct php-config. After that the module will know where to look for the rest of your php installation.
I had fun working with this module for a while (writing a Catalyst and then a Mojolicious wrapper around WordPress), but it has fallen into disrepair and disrepute. Share whatever you learn trying to build it and we'll put it in the docs, making this module that much easier to use.
I'm trying to do face detection on perl, and I found out about OpenCV and the perl module Image::ObjectDetect on CPAN here and here. I've done a clean install of CentOS 6.5 (minimal) on a virtual machine to test this, and then:
yum -y update
yum -y install perl cpan opencv
Ok, and considering I never user cpan before, I tried the obvious (after some short google searches)
perl -MCPAN -e shell
[accept default]
install Image::ObjectDetect
that gave me some errors:
Package opencv was not found in the pkg-config search path.
Perhaps you should add the directory containing `opencv.pc'
to the PKG_CONFIG_PATH environment variable
No package 'opencv' found
After googling about that error, I did:
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
mkdir /usr/local/lib/pkgconfig
vi /usr/local/lib/pkgconfig/opencv.pc
the content of the file:
prefix=/usr
exec_prefix=${prefix}
includedir=${prefix}/include
libdir=${exec_prefix}/lib
Name: opencv
Description: The opencv library
Version: 2.x.x
Cflags: -I${includedir}/opencv -I${includedir}/opencv2
Libs: -L${libdir} -lopencv_calib3d -lopencv_imgproc -lopencv_contrib -lopencv_legacy -l
After I ran the install again, I noticed I was missing gcc:
/bin/sh: gcc: command not found
yum -y install gcc
Running the install again now gives me:
...
Note (probably harmless): No library found for -lopencv_calib3d
Note (probably harmless): No library found for -lopencv_imgproc
Note (probably harmless): No library found for -lopencv_contrib
Note (probably harmless): No library found for -lopencv_legacy
Note (probably harmless): No library found for -l
Writing Makefile for Image::ObjectDetect
Could not read '/root/.cpan/build/Image-ObjectDetect-0.12-BsNNjF/META.yml'. Falling back to other methods to determine prerequisites
cp lib/Image/ObjectDetect.pm blib/lib/Image/ObjectDetect.pm
cp lib/Image/ObjectDetect.xs blib/lib/Image/ObjectDetect.xs
/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap ObjectDetect.xs > ObjectDetect.xsc && mv ObjectDetect.xsc ObjectDetect.c
gcc -c -I/usr/include/opencv -I/usr/include/opencv2 -Isrc -I/usr/include/opencv -I/usr/include/opencv2 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom -fasynchronous-unwind-tables -DVERSION=\"0.12\" -DXS_VERSION=\"0.12\" -fPIC "-I/usr/lib/perl5/CORE" ObjectDetect.c
In file included from ObjectDetect.xs:7:
/usr/lib/perl5/CORE/cv.h:13: error: redefinition of ‘struct xpvcv’
/usr/lib/perl5/CORE/cv.h:94: error: conflicting types for ‘xpvcv_allocated’
/usr/lib/perl5/CORE/cv.h:94: note: previous declaration of ‘xpvcv_allocated’ was here
ObjectDetect.xs:8:21: error: highgui.h: No such file or directory
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_new’:
ObjectDetect.xs:19: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:19: error: (Each undeclared identifier is reported only once
ObjectDetect.xs:19: error: for each function it appears in.)
ObjectDetect.xs:19: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:22: warning: implicit declaration of function ‘cvLoad’
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_xs_detect’:
ObjectDetect.xs:37: error: ‘IplImage’ undeclared (first use in this function)
ObjectDetect.xs:37: error: ‘img’ undeclared (first use in this function)
ObjectDetect.xs:37: error: ‘gray’ undeclared (first use in this function)
ObjectDetect.xs:37: warning: left-hand operand of comma expression has no effect
ObjectDetect.xs:39: error: ‘CvMemStorage’ undeclared (first use in this function)
ObjectDetect.xs:39: error: ‘storage’ undeclared (first use in this function)
ObjectDetect.xs:40: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:40: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:41: error: ‘CvSeq’ undeclared (first use in this function)
ObjectDetect.xs:41: error: ‘objects’ undeclared (first use in this function)
ObjectDetect.xs:42: error: ‘CvRect’ undeclared (first use in this function)
ObjectDetect.xs:42: error: ‘rect’ undeclared (first use in this function)
ObjectDetect.xs:46: warning: implicit declaration of function ‘cvLoadImage’
ObjectDetect.xs:50: warning: implicit declaration of function ‘cvCreateImage’
ObjectDetect.xs:50: warning: implicit declaration of function ‘cvSize’
ObjectDetect.xs:51: warning: implicit declaration of function ‘cvCvtColor’
ObjectDetect.xs:51: error: ‘CV_BGR2GRAY’ undeclared (first use in this function)
ObjectDetect.xs:52: warning: implicit declaration of function ‘cvEqualizeHist’
ObjectDetect.xs:54: warning: implicit declaration of function ‘cvCreateMemStorage’
ObjectDetect.xs:55: error: expected expression before ‘)’ token
ObjectDetect.xs:56: warning: implicit declaration of function ‘cvHaarDetectObjects’
ObjectDetect.xs:58: error: ‘CV_HAAR_DO_CANNY_PRUNING’ undeclared (first use in this function)
ObjectDetect.xs:65: error: expected expression before ‘)’ token
ObjectDetect.xs:74: warning: implicit declaration of function ‘cvReleaseMemStorage’
ObjectDetect.xs:75: warning: implicit declaration of function ‘cvReleaseImage’
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_DESTROY’:
ObjectDetect.xs:86: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:86: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:88: error: expected expression before ‘)’ token
ObjectDetect.xs:89: warning: implicit declaration of function ‘cvReleaseHaarClassifierCascade’
make: *** [ObjectDetect.o] Error 1
JIRO/Image-ObjectDetect-0.12.tar.gz
/usr/bin/make -- NOT OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
JIRO/Image-ObjectDetect-0.12.tar.gz : make NO
Any help? Thanks.
Glad to see someone using OpenCV with Perl! I hope you can get it working and show us some nice asps and scripts :-)
You seem to be building from source and installing packages (with yum) - this sometimes complicates matters when it comes to dependencies. For example, you may have a version of OpenCV that is too new for the CPAN module. Image::ObjectDetect` is fairly old
(the last release was several years ago http://metacpan.org/pod/Image::ObjectDetect) whereas OpenCV is being actively developed.
Note this line:
ObjectDetect.xs:8:21: error: highgui.h: No such file or directory
I came across a similar error compiling applications that depend on OpenCV after a recent update. Either the header files were missing; the applications Makefiles did not know how to locate them; or other development libraries and headers in the chain of dependencies needed updating as well.
You may get better luck solving this by posting to the OpenCV development list where the error message may look more familiar.
See: http://groups.yahoo.com/neo/groups/OpenCV/info
You could try installing some other modules to see if it is perl, XS, gcc or your version of OpenCV that is at fault. Here's another module that uses OpenCV:
https://github.com/shisful/Image-OpenCV
Okay i am trying to install BIND on solaris 11.
Upon downloading the tar file using wget, then i used extract it out.
After which, when i enter the command :
./configure
i face the following error
checking <<some stuff>>
..
..
..
checking <<some stuff>>
checking whether we are cross compiling... configure: error: in '/home/user/user/downloads/bind9.8.2
configure: error: cannot run C compiled programs.
If you meant to cross compile, use '--host'.
so i used --host in my option, but i cant get it to work,
For example, i entered the below command :
./configure --host=ulinux-uclibc
I received an error saying
checking host system type... Invalid configuration 'ulinux-uclibc': machine 'ulinux' not recognized
Thanks! :)
Why not just install the bind package from your configured solaris publisher?
# pkg install network/dns/bind service/network/dns/bind
should get you exactly what you need. That will get you ISC Bind v9.6.3 if you use pkg.oracle.com/solaris/release publisher.
I'm trying to install gtk+-3.2.3 on Ubuntu natty. This is a fresh Ubuntu install with security updates only. I have not installed any new versions of gtk. I just have gtk2, that Ubuntu comes with. First I installed the following:
sudo apt-get install libffi-dev zlib1g-dev fam libdbus-1-dev libdbus-glib-1-dev gobject-introspection libxext-dev libxrender1-dbg colordiff libcairo2-dev libtiff4-dev libpng12-dev libxft-dev libxi-devel
I have the following folders in: /home/mike/gtk
atk-2.1.5
gdk-pixbuf-2.24.1
glib-2.30.1
gtk+-3.2.3
pango-1.29.1
Then:
cd /home/mike/gtk/glib-2.30.1
./configure && make
rm -rf /home/mike/gtk/include/glib.h /home/mike/gtk/include/gmodule.h (glib INSTALL instructions)
repeat for the other folders except without the rm, in the following order:
atk-2.1.5
gdk-pixbuf-2.24.1
pango-1.29.1
gtk+-3.2.3
Before running ./configure for gtk+-3.2.3 enter this in the terminal:
CPPFLAGS="-I/home/mike/gtk/include"
LDFLAGS="-L/home/mike/gtk/lib"
PKG_CONFIG_PATH="/home/mike/gtk/lib/pkgconfig"
export CPPFLAGS LDFLAGS PKG_CONFIG_PATH
LD_LIBRARY_PATH="/home/mike/gtk/lib"
PATH="/home/mike/gtk/bin:$PATH"
export LD_LIBRARY_PATH PATH
export PKG_CONFIG_PATH="/home/mike/gtk/lib/pkgconfig:$PKG_CONFIG_PATH"
I get the these errors when I run make on gtk+-3.2.3:
gdkwindow-x11.c: In function '_gdk_x11_moveresize_handle_event':
gdkwindow-x11.c:4301:9: error: 'XIEvent' undeclared (first use in this function)
gdkwindow-x11.c:4301:9: note: each undeclared identifier is reported only once for each function it appears in
gdkwindow-x11.c:4301:18: error: 'ev' undeclared (first use in this function)
gdkwindow-x11.c:4301:33: error: expected expression before ')' token
gdkwindow-x11.c:4302:9: error: 'XIDeviceEvent' undeclared (first use in this function)
gdkwindow-x11.c:4302:24: error: 'xev' undeclared (first use in this function)
gdkwindow-x11.c:4302:46: error: expected expression before ')' token
gdkwindow-x11.c:4306:16: error: 'XI_Motion' undeclared (first use in this function)
gdkwindow-x11.c:4308:13: warning: implicit declaration of function '_gdk_x11_device_xi2_translate_state'
gdkwindow-x11.c:4313:16: error: 'XI_ButtonRelease' undeclared (first use in this function)
make[4]: *** [gdkwindow-x11.lo] Error 1
make[4]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk/x11'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/mike/gtk/gtk+-3.2.3'
make: *** [all] Error 2
You place GTK3's source code in an arbitrary directory (into which you have write permissions). And you run ./configure from there.
You may want to pass the configure scripts (of each package) a common --prefix to override the default of /usr/local/ (this is needed, e.g. with --prefix $HOME/pub, if you cannot write under /usr/ because you don't have root access).
I've been trying to install the IPTables module for perl http://metacpan.org/pod/IPTables::IPv4 and I've been running into errors during installation.
I've tried installing using the CPAN in shell as well as downloading the tarball form the link above. Both installation give me errors. I am not sure how to get the dump from CPAN but what I can get is a dump of my shell when I run the MAKE file from the tarball:
[root#localhost IPTables-IPv4-0.98]# make
make -C libiptc/ all
make[1]: Entering directory `/home/student/Downloads/IPTables-IPv4-0.98/libiptc'
gcc -o libip6tc.o -c libip6tc.c -I../include -I/usr/src/linux/include -DIPTABLES_VERSION=\"1.2.8\" -O2 -Wall
In file included from libip6tc.c:111:0:
libiptc.c: In function ‘ip6tc_init’:
libiptc.c:312:10: warning: pointer targets in passing argument 5 of ‘getsockopt’ differ in signedness
/usr/include/sys/socket.h:190:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
libiptc.c: In function ‘target_name’:
libiptc.c:727:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
libip6tc.c: In function ‘ipv6_prefix_length’:
libip6tc.c:121:7: error: ‘const struct in6_addr’ has no member named ‘in6_u’
libip6tc.c:125:7: error: ‘const struct in6_addr’ has no member named ‘in6_u’
libip6tc.c: In function ‘dump_entry’:
libip6tc.c:201:3: warning: dereferencing type-punned pointer will break strict-aliasing rules
make[1]: *** [libip6tc.o] Error 1
make[1]: Leaving directory `/home/student/Downloads/IPTables-IPv4-0.98/libiptc'
make: *** [libiptc/libiptc.a] Error 2
[root#localhost IPTables-IPv4-0.98]#
I would like to know what do I need to do so that I can install the module. Are there some dependencies that I need to install?
Your help is greatly appreciated.
The cpanratings and CPAN testers reports for this module make me think that you're wasting your time here.