Problem/Introduction:
I'm trying to install Mapnik on Centos 7. I've had about a year UNIX experience in the professional environment, but I am still very much a beginner. I've compiled and installed boost which to my knowledge comes with ICU C++ Libraries. Unfortunately when I run ./configure for Mapnik installation I get the following error:
Exiting... the following required dependencies were not found:
- icuuc (ICU C++ library | configure with ICU_LIBS & ICU_INCLUDES or use ICU_LIB_NAME to specify custom lib name | more info: http://site.icu-project.org/)
How do I install this library? I can't find any good internet resources, or maybe I'm looking in the wrong places.
Thanks in advance.
yum install freetype-devel libtool-ltdl-devel libpng-devel libtiff-devel libjpeg-devel gcc-c++ libicu-devel python-devel bzip2-devel boost libwebp-devel libtiff-devel libjpeg-turbo-devel libpng-devel sqlite-devel gdal-devel gdal-python
wget https://mapnik.s3.amazonaws.com/dist/v3.0.10/mapnik-v3.0.10.tar.bz2
tar -xf ./mapnik-v3.0.10.tar.bz2
cd ./mapnik-v3.0.10/
./configure
make && make install
Mapnik v3.0.10 needs Boost of minimum version v1.56
CentOS 7 is shipped with version v1.53
Related
I created an offline repo for RHEL 8:
downloaded all needed packages with dnf download
create repodata with createrepo command
I'm able to install most of the packages in offline mode but python3 can't be installed
The error I'm receiving is:
No available modular metadata for modular package 'python36-3.6.8-2.module+el8.1.0+3334+5cb623d7.x86_64', it cannot be installed on the system
Error: No available modular metadata for modular package
What can I do to fix this?
Regards,
It seems this worked for me: https://unix.stackexchange.com/questions/567057/download-rpm-and-all-dependencies-on-rhel-centos-8
There are some packages required like: python3-createrepo_c libmodulemd
And Python module: click
It may be that you need Development Tools:
$ sudo yum groupinstall ‘Development Tools’
See https://developers.redhat.com/rhel8/hw/python
i follow a tutorial from plesk to install memcache(d), he say put this line:
/opt/plesk/php/7.2/bin/pecl install memcached
But this work not and i get this error:
Package "memcached" Version "3.0.4" does not have REST xml available
install failed
What i can do? Have any a how to for noobs? :-)
Best regards, Stefan
Can't reproduce this error. I have successfully compiled module with
yum install plesk-php72-devel gcc make libmemcached-devel
/opt/plesk/php/7.2/bin/pecl install memcached
libmemcached directory [no] : /usr
As the title says I am trying to install the perl module perl-Net-SSH2. I have tried via yum but get an error that no package is available.
yum install perl-Net-SSH2
I have tried by downloading an rpm file but the only one I can find is for el6 and it complains about the version of perl
yum localinstall perl-Net-SSH2-0.45-4.el6.x86_64.rpm
Requires: perl(:MODULE_COMPAT_5.10.1)
I have tried downloading the source code but get told "Unable to find a working version of library ssh2 in the following directories" even though it is installed. (via yum install libssh2 libssh2-devel)
I have tried via cpan but get the same error "Unable to find a working version of library ssh2 in the following directories"
Any ideas? Google is very sketchy on this and only
OK, I solved this while writing the question. Seeing as information on this is limited I thought it would be worth posting the question anyway. The error message was giving the wrong information in that it was actually gcc that was missing, not libssh2. These are the steps I followed. I've tried to make it as verbatim as possible. I have not verified all these modules are required but this is what I installed before compiling it.
yum install libssh2 libssh2-devel
yum install openssl openssl-devel
yum install perl-Net-SSLeay
yum install gcc
Search for Net::SSH2 in google
Click the link "Net::SSH2 - search.cpan.org"
Download source code (tar.gz file)
Copy it to your redhat 7 machine
tar -xvf Net-SSH2-0.62.tar.gz
cd Net-SSH2-x.xx
perl Makefile.PL
make
make install
Should all be working now, test it with
perl -e 'use Net::SSH2;'
Here is the stdout for install:
$sudo cpanm XML::LibXML
--> Working on XML::LibXML
Fetching http://www.cpan.org/authors/id/S/SH/SHLOMIF/XML-LibXML-2.0014.tar.gz ... OK
Configuring XML-LibXML-2.0014 ... N/A
! Configure failed for XML-LibXML-2.0014. See /home/kahmed/.cpanm/build.log for details.
details:
Unpacking XML-LibXML-2.0014.tar.gz
Entering XML-LibXML-2.0014
Checking configure dependencies from META.yml
Checking if you have ExtUtils::MakeMaker 0 ... Yes (6.55_02)
Configuring XML-LibXML-2.0014
Running Makefile.PL
enable native perl UTF8
running xml2-config...ok (2.9.0)
Checking for ability to link against xml2...no
Checking for ability to link against libxml2...libxml2, zlib, and/or the Math library (-lm) have not been found.
Try setting LIBS and INC values on the command line
Or get libxml2 from
http://xmlsoft.org/
If you install via RPMs, make sure you also install the -devel
RPMs, as this is where the headers (.h files) are.
Also, you may try to run perl Makefile.PL with the DEBUG=1 parameter
to see the exact reason why the detection of libxml2 installation
failed or why Makefile.PL was not able to compile a test program.
-> N/A
-> FAIL Configure failed for XML-LibXML-2.0014. See /home/kahmed/.cpanm/build.log for details.
i tried installing libxml2 manually, but still getting the same issue.
also, i checked for libxml2-dev:
sudo apt-get install libxml2-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
libxml2-dev is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 78 not upgraded.
here is the system info:
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 11.04
Release: 11.04
Codename: natty
uname -a
Linux autobot 2.6.38-8-server #42-Ubuntu SMP Mon Apr 11 03:49:04 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
I think the relevant line is:
Checking for ability to link against libxml2...libxml2, zlib, and/or the Math library (-lm) have not been found.
So, you've covered off libxml. Have you installed the appropriate zlib package? Try:
sudo apt-get install zlib1g-dev
Then try installing XML::LibXML again.
Why do you want to use CPAN for this anyway? It is typically very bad idea to install CPAN packages if you have native packages provided by standard operating system installer.
Ubuntu provides a lot of Perl packages natively, with following naming convention: package name always starts with lib, then Perl package name like XML::LibXML is converted to lower case and :: replaced to dash - (XML::LibXML => xml-libxml), and finally -perl suffix is added. In other words, native package name for XML::LibXML would be libxml-libxml-perl.
So, in your case, you simply run this command and it will pull all necessary dependencies automatically:
sudo apt-get install libxml-libxml-perl
If you don't like this package for any reason you can uninstall it with sudo apt-get remove. If you use CPAN, it is very difficult to uninstall it reliably.
Overlooked the obvious:
sudo apt-get install --reinstall zlibc zlib1g zlib1g-dev
then:
sudo cpanm XML::LibXML
works!
Maybe this is new version. I did:
sudo apt-get install libxml2-dev
After this module builded and installed successfully
I have been asked to port a Linux C++ application to 64-bit RedHat 6.2. Instructions for buildling the application indicate that GTK+ (gtkmm24-2.8.0 or greater) and GLADE (libglademm24-2.6.1 or greater) are required. I successfully ran: aclocal, automake and ./configure but when I run make, I get:
error: gtkmm.h No such file or directory
I could not find gtkmm.h anywhere in the file system. I used yum to search for gtkmm and it found gtkmm24.x86_64 which I installed but it did not install gtkmm.h. Does anyone know how I can get the header files for gtkmm for 64-bit RedHat 6.2?
Install gtkmm24-devel. After that you'll be able to use
pkg-config --cflags gtkmm-2.4
to get the list of include directories needed for using gtkmm.