I'm using Enonic XP.
I'm trying to add custom config file with some data for test and dev installation.
I've already checked documentation but, didn't find any related answer.
So is there any way to get values form property file?
I've fixed this via invocation of java code form enonic server side js code.
Related
I want to upload a module to a Spring XD installation using the REST interface it provides. If the module is brand new, it works as expected. If the module was previously registered, though, the command will fail (again, as expected).
I understand it would be conceptually simple to delete the module and upload it again. The problem with that is that the module is configured by means of a .properties file, under the XD_MODULE_CONFIG_LOCATION hierarchy. Actually, the presence of this file is hindering my ability to delete the module, even if using the xd-shell!
The xd-shell command provides a '--force' option to 'module upload', that solves the problem. Is there any equivalence when using the POST method to register the module?
Thanks in advance.
I just looked at the REST controller for module upload and it looks like adding ?force=true to the URI will do it.
Yes; that's what the shell does:
String uriTemplate = resources.get("modules").toString() + "/{type}/{name}?force={force}";
I have downloaded and started the community version of SFSx2. I read everything on their documentation page:
http://docs2x.smartfoxserver.com/DevelopmentBasics/introduction
Which unfortunately only talks about flash client side code. Nothing about the corresponding server side code, nor about html5 client side which I need.
I downloaded the HTML5 examples, which took me a long time to find (they are here: http://www.smartfoxserver.com/download/get/140 )
None of the examples work, as they can't connect to the server. Presumably, this is because the examples only supply client side code. There are no instructions supplied on how to install or run the examples.
I can find no mention on the smartfox documenation on the following:
1) what language is used on the server side. One assumes its java.
2) how does one deploy java code to the smartfox server? I cant find any mention of this in the docs.
3) how does one find and install the server part of the client side examples (which are Tris, GameLobby, BuddyMessenger, AdvancedChat).
I applied to be allowed to post on the smartfoxserver forums, but no reply yet.
I also found it hard so I share what I've found out.
The server extensions are written in Java. I used Eclipse JUNO to write my code.
You can download Eclipse here. http://www.eclipse.org/downloads/
You export the extension in jar format from eclipse into you extension path. The name of your file has to end in 'extension' eg MyFirstExtension.jar otherwise sfs2x wont recognize it. Your extension path will be something like this: C:\Program Files\SmartFoxServer2X\SFS2X\extensions\MyFirstExtension\MyFirstExtension.jar if your working in windows.
You will find docs on JAVA API here. http://docs2x.smartfoxserver.com/api-docs/javadoc/server/
This is a link to the basic example code: http://www.smartfoxserver.com/download/get/120
Unzip the content into the [SFS2X_install_folder]/SFS2X/www/root/examples folder, overwriting the existing file. Run the index.html file, then navigate to another index.html to open the example. Run the sfs2x-standalone.exe first of course(see below). If you followed the 'server configuration tutorial' on smartfox website and changed the server ports, the examples wont work. Leave the ports alone until you start to understand the server.
This is a link to the flash example code: http://www.smartfoxserver.com/download/get/108
You will find the example code for apps mentioned above. They are written in Adobe Flash Builder and Java extensions. I don't know if there is any code for HTML5 but the Java server code and AS3 is there.
I also found that using the standalone server was the way to go rather than using SFS2x as a service. c:\program files\smartfoxserver2x\sfs2x\sfs2x-standalone.exe. Using the exe gives you the command prompt window. You can use the window for debugging and see the state of the server when it starts.
Most of the examples should work without creating extensions but to create an extension out of source examples:
Create and setup a new project in your Java IDE. You will have already set up a workspace.
Copy the content of the /source/server/src folder to your project's source folder.
Add SFS2X Libraries. Go to properties of the project -> Select Java Build Path -> Click Library Tab -> Add external jar. Add 'sfs2x.jar' and 'sfs2x-core.jar' from C:\Program Files\SmartFoxServer2X\SFS2X\lib folder. To create the extension, export jar file to extension path. Restart server.
Another problem I had was the Java Version I was using. I had to use Java1.6 with my version of sfs2x when writing extensions. This was trial and error as there was no documentation. There may be a newer version out now.
I had to copy all the server source into eclipse to try and understand how things were done. It was a way of having all the code in one place. There was a lot of trial and error as getting help is hard. I eventually accomplished what I set out to achieve. Good Luck.
SmartFox Server is easy to use even with extension. documentation Give try to Nuggeta solution for game development too. No extension needed at first. This is optionnal.
We have full HTML5 open source game walkthrough on github
I'm currently working on an shared library based on mono, where I want to put as much business logic of my app as possible.
I used this helpful tutorial.
I managed putting the whole logic for rest-requests in this shared library, but now I'm stuck with soap.
I used the wsdl command of mono to generate Client Stubcode from my wsdl (as described here http://www.mono-project.com/Web_Services).
When I put the generated class to my C# library, which is the root project of my shared library, there is a warning that the Reference to System.Web.Services cannot be found.
So I included the System.Web.Services.dll manually.
For the Android Library Project I added a Reference to ...\Reference Assemblies\Microsoft\Framework\MonoAndroid\v1.0\System.Web.Services.dll. It compiles without warnings.
But now it comes to the Windows Phone Library Project.
There is no System.Web.Services.dll for WP 7.5, right? I tried with the Mono-Touch dll but it gives me a lot compilation Errors.
Someone knows how I can get out of this?
I actually had some issues with the generated WSDL myself. Turns out that the classes that were generated through the "Create Web Reference" piece of Visual Studio inside of a Mono for Android project ended up causing some big issues when connected to a WCF Web Service. Not sure where I ran into this information, but this is what I ended up doing.
What you need to do is manually create a Service Reference using the SILVERLIGHT SVCUtil.
On my development system it was located here:
C:\Program Files (x86)\Microsoft SDKs\Silverlight\v3.0\Tools
I called it with the below command line:
slsvcutil.exe http://localhost/<path to WCF service endpoint>/service.svc /directory:"<temp directory to store generated cs file>" /noConfig /namespace:"*,<Full namespace of the generated class>"
That will actually generate a CS file that is saved into the path specified by the /directory tag above. Copy that generated cs file to your project directory and then include it in the project.
The problem that I was having that forced me to look for another option was that I was able to pull the data properly using the WSDL generated through the "Add Web Reference" option in Visual Studio, but as soon as I tried to pass the data back up the wire to the web service, everything blew up. Using the Service Reference generated by the Silverlight Service Util actually generated all the code properly for Async operations and after learning how to properly manage those Async operations everything works like a dream.
Since you are generating this new WSDL using the Silverlight Utility, it should work just fine through Windows Phone 7. I believe that the DLL to reference for all of this is the System.ServiceModel dll.
I wish I could remember where I ran across this information, as I would like to give the original author credit, but unfortunately, I don't recall that.
Hope that helps out!
Chaitanya Marvici
I added a service reference that points to http://api.microsofttranslator.com/V1/soap.svc in my project. After adding the reference an app.config file was created.
When I run the project everything works. After creating a setup file with Advanced Installer (program for authoring Windows Installer setup packages) I get the following error message when I run the installed program.
"Could not find default endpoint element that references contract TranslatorService.LanguageService in the ServiceModel client configuration section. This might be because no configuration file was found for your application, or because no endpoint element matching this contract could be found in the client element."
Can someone help?
This problem is not generated by the setup package created with Advanced Installer, it seems to be .NET specific. Here is another similar thread: Microsoft translator error
I'd like to check if some service is running on the local computer before installation of my product. How can I check it?
This can be done through a custom action. With custom code you can find any information you want about a service. That information can then be saved in installer properties which can be used during install.
Since you need access to installer properties, you will have to use a win32 DLL or VBScript custom action. You can find a C++ DLL custom action tutorial here:
http://www.codeproject.com/KB/install/msicustomaction.aspx
Since you're using WiX, you can use CloseApplication in WixUtilExtension to do this. Set #RebootPrompt="no" since you want it to be running and not shut down. Set #Property to a property you then use in a condition to show your warning.