I'd like to check if some service is running on the local computer before installation of my product. How can I check it?
This can be done through a custom action. With custom code you can find any information you want about a service. That information can then be saved in installer properties which can be used during install.
Since you need access to installer properties, you will have to use a win32 DLL or VBScript custom action. You can find a C++ DLL custom action tutorial here:
http://www.codeproject.com/KB/install/msicustomaction.aspx
Since you're using WiX, you can use CloseApplication in WixUtilExtension to do this. Set #RebootPrompt="no" since you want it to be running and not shut down. Set #Property to a property you then use in a condition to show your warning.
Related
Recently, I was assigned the task to create a deployment package for an application which btw, I'm totally new at. So far, so good.. Now there is a requirement to extract files from a zip file which will be bundled with the setup file. So, I had to write custom actions in the 'Commit' section of the Installer class. I added the Installer class in a new project of type 'Class Library' under the same solution. I wrote the code after 'base.Commit(savedState)'.
I tried showing MessageBox at the event entry point, used Debugger.Launch(), Debugger.Break() but somehow, no matter what I do, it seems that the custom action is not willing to be hit at all and the application just installs itself. I searched a lot of sites and blogs but no help so far.
I've assigned my installer class (SampleApp.exe, in my case) to all the Custom Action's modes (Install, Commit, Rollback and Uninstall) in the Deployment project. Any help.
P.S. I'm using a Visual Studio 2010 setup project.
Thanks, in advance!
You should probably be trying a class library Dll, not an executable (which is typically for something like a service).
You don't need it all the nodes if all you're doing is calling at Commit. And why Commit? Install is just the same in most cases.
If you're not seeing a MessageBox then probably your CA isn't being called, and that may because it's not a class library. Note that your CA is not running in the interactive user context - it's being called from an msiexec process running with the system account, so you must be very explicit about (say) the path to the zip file, and any user profile folders will probably fail because the system account doesn't really have them.
What files are these and where are they going on disk? If they are user profile files you can install the zip files to a per machine location and then have the application itself unzip the files to the desired location on first launch. Unzipping from within your setup is not good practice - it is error prone and bad design.
Using the application allows proper exception handling and interactivity (the user can be informed if something goes wrong). Set some registry flags in HKCU when you have completed the unzipping so it doesn't happen more than once, and perform the unzip once per user.
I am very new to monitoring and with linux.
So i took the easy path and Installed FullyAutomatedNagios (FAN) on a linux machine (CentOS).
and installed/configured NSclient++ on windows machine i wanted to monitor. Via webinterfece of FAN which is centreon i started to monitor basic parameters like (memory,cpu,disks,services etc) Via CHECK_NT commands.
Now i want to move forward and want to monitor something more like DB performance,queries etc , but inorder to do that i need to install nagios plugins and i have no idea how can i do that.please help.
The first things to do in my opinion are :
Know exactly what do you want to check (DB, Web server, ...)
Search on http://exchange.nagios.org/ or others (why not) if there are already some plugins who responding to your demand.
Search if the check can be done directly on the monitoring server or in the client server (the protocol will change, NRPE, NSClient++ or SNMP for example)
If yes, you have to implement them on your monitoring server, on your plugins directory (where are your CPU, memory plugins) and execute the script with corrects parameters if the plugin works.
If yes, you can now implement them on your interface and make them automatic, like create command, create service...
Define your metrics and check when you want your plugins output Warning alert or Critical alert and all these things are set in the interface.
If you don't find plugins, you must create one.
This is way to do and can be optimized obviously.
Nicolas B.
I have developed an Excel XLL using ExcelDNA and C#. I am at the point where I would like to begin testing the deployment, but cannot find much information that actually provides steps that work.
My project was developed as a Class library with ExcelDna references. In the .dna file, I have the code below that will pack all resources into a packed version of the XLL (i.e. the Pack="true" attribute).
<DnaLibrary Name="ExcelXLL" RuntimeVersion="v4.0" Language="C#">
<ExternalLibrary Path="ExcelXLL.dll" LoadFromBytes="false" Pack="true" />
I would like to deploy the packed XLL to the target machine in the path:
%APPDATA%\Microsoft\AddIns
In order to automatically register the XLL with Excel, I need to add a registry key that depends on the version of Excel that the user has.
For instance, on my computer (Windows 7 64 bit running Excel 2007 32-bit), I would need to add a registry key to the following path:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Excel\Options\
The key would be type REG_SZ with the name OPEN (or OPEN1, OPEN2, etc.) and the value
/R "ExcelXLL-packed.xll"
I have 2 problems though. The first is in determining which version of Excel that the user has to get the correct path and the 2nd is to determine the correct OPEN version that I need to create (for example, if the user already has OPEN, OPEN1, and OPEN2 then I would create an OPEN3 key).
I am trying to do the installation using either the Setup and Deployment project or a InstallShield LE project and cannot determine how to go about this. Does anyone know how to do this or a better way of doing it?
EDIT 1:
I have done a great deal of research on this and have looked at several windows installers.
In the Package and Deployment and InstallShield LE, I can get the install/uninstall to work by putting an installer class into my class library and bundling project output with the install. In this approach, I handle inserting/removing the registry key using the installer class. The problem that I have is that the user must uninstall first before running a new install (no update capability).
I downloaded the Setup Factory demo version and can get install/update to work but cannot do the framework check (not shipped with the demo). Also, the uninstall fails (though I may be able to get this to work with some more investigation).
I am interested in using the WiX installer, but would like to know if anyone has a sample of how to perform the deployment using WiX. I would also like to know if I need to use the installer class or if there is a different way to handle the search for the OPEN[n] key under HKCU\Software\Microsoft\Office[Version].0\Excel\Options. If I were to use the project output to enable the installer class, then I need to have 2 separate target directories (one under Program Files for the basic project output and one under %appdata%\Microsoft\AddIns for the packed XLL).
Any help is greatly appreciated.
Thanks,
Lee
To detect Excel 32-bit vs. 64-bit, you can check the registry: Detect whether Office is 32bit or 64bit via the registry
For the OPEN, OPEN1, OPEN2 etc. you typically need a Custom Action in the install script that enumerates the keys.
Using IsWix and Wix 3.7, I was able to resolve this.
Useful links for how to register the components are as follows:
For generating a C# class to handle Windows Installer Custom Actions:
http://www.codeproject.com/Articles/132918/Creating-Custom-Action-for-WIX-Written-in-Managed?fid=1599130&df=90&mpp=25&noise=3&prof=False&sort=Position&view=Quick&spc=Relaxed&select=4131367&fr=1#xx0xx
http://blogs.msdn.com/b/jschaffe/archive/2012/10/23/creating-wix-custom-actions-in-c-and-passing-parameters.aspx
For setting the property of the CustomAction.config file to Content
WIX Custom Actions built for .Net Framework 4.0 does not work? Ways to resolve?
EDIT 1:
For general knowledge on WiX (Very important)
http://channel9.msdn.com/blogs/scobleizer/wix-team-the-most-used-piece-of-software-at-microsoft-and-its-open-source#Page=2
I'm working on an installer that is supposed to install Windows services in wix v3.8. The problem is that we need to make a major upgrade without uninstalling the service only to stop it.
We're using ServiceInstall and ServiceControl inside the component that holds the service exe file. Is there a way to make the execution of ServiceInstall conditional (using a condition like REMOVE="ALL" AND NOT UPGRADINGPRODUCTCODE) so the service is not uninstalled when upgrading (just stopped so we can upgrade the files)?
One solution would be to use custom actions, but maybe there is a better way?
Thanks!
You would have to override the action that process those elements. The following may work as long as you are okay if it applies to all services in your MSI package (if you only have one service then good on ya):
<InstallExecuteSequence>
<DeleteServices>NOT UPGRADINGPRODUCTCODE</DeleteServices>
</InstallExecuteSequence>
You don't need to condition for remove since the DeleteServices would already factor in the state of the Component.
What finally ended up working for me was
<DeleteServices><![CDATA[REMOVE ~= "ALL" AND (NOT UPGRADINGPRODUCTCODE)]]> </DeleteServices>
<InstallServices><![CDATA[NOT Installed]]> </InstallServices>
I arrived at this answer through a series of trial and error attempts and a combination of a few other threads with similar answers.
One of the possible reasons why only the doesn't work is because WIX also removes the service upon re-install.. we only want to install the service once, during the initial install. We also want to make sure that the service is removed upon uninstall. This is the only combination of conditions which worked for me, allowing the service to keep its settings and user account.
Can any one tell me how to convert an legacy application which is vb6 ( COM dll's ocx and exes) to use Regfree COM .
I tried opening the dlls in visual studio and created manifest file, but some of the dlls it is giving error.
Is there any tools out there which will help me to do this process?
I tried a tool from codeproject which is called regsvr42, which is not creating the manifest fully.
I used tools like PE explorer where I get all the typelib information , but converting them into manifest files is too difficult.
We have started migrating that to .NET, for some months we have to deploy it, it will easier if it is xcopy based deployment.
To create manifest files you can try to use Make My Manifest from http://mmm4vb6.atom5.com/.
EDIT The MMM website is down. I see here that the author was having trouble with their hosting and has provided another location to get Make My Manifest - download it here.
If you can control creation of objects you can use DirectCOM from http://www.thecommon.net/10.html
Keep in mind that if one of used DLLs or OCXs is creating other COM objects dynamically with CreateObject calls, that reference will not be stored in vbp project file and you won't get full manifest file. Probably you will have to catch object creations while the application is running. Depends.exe application can profile running application and report all used dlls. I don't know if there is tool that can find additional COM related information.
There is an excellent walkthrough of what to do in this article on MSDN: Registration-Free Activation of COM Components: A Walkthrough.
Make My Manifest can accomodate late binding as well as early binding. You simply have to add the references to the late-bound dependencies manually, by file location or by ProgId.
You might look at http://mmm4vb6.atom5.com/mmm-demo-1248.html for additional help in using the utility.
MakeMyManifest is well spoken of as an automatic tool for creating manifests for VB6 projects, haven't tried it myself.
DirectCOM also has fans, again I haven't tried it.
EDIT The MMM website is down. I see here that the author was having trouble with their hosting and has provided another location to get Make My Manifest - download it here.
There is a semi-automatic technique. You can create the manifests with Visual Studio 2008 (you can use a free version like Visual Basic Express Edition). Then make a couple of edits by hand to make the manifests suitable for use from VB6. See this section of this MSDN article for step-by-step instructions - ignore the rest of the article which is about ClickOnce.