I need to include Matlab code in my Latex file. I'm using the listings package with matlab-prettifier and the settings are:
\usepackage{listings}
\usepackage[numbered, framed]{matlab-prettifier}
...
\lstset{
style = Matlab-editor,
basicstyle = \mlttfamily\scriptsize,
escapechar = ",
mlshowsectionrules = true,
}
\lstinputlisting[breaklines = true, breakatwhitespace=false]{test.m}
The long lines do not break, however. Any idea why this happens and how to solve it?
Edit: I discovered that if I change the class of the document from mwbk (current) to article, the lines break as desired. There should be a conflict with the class mwbk defined in
http://web.mit.edu/ghudson/dev/nokrb/third/tetex/texmf/tex/latex/mwcls/mwbk.cls, but I cannot figure out what is the problem.
Related
I'm trying to comment some lines in .sln file temporarly, but I receive error:
"The selected file is a solution file, but appears to be corrupted and cannot be opened"
According to this blog comments are done by "#", but when I comment out every line in GlobalSection (section about Team Foundation Server source control binding) I get above error. Is there any other way to comment out lines in .sln ?
EDIT - section of which I want to comment out:
GlobalSection(TeamFoundationVersionControl) = preSolution
SccNumberOfProjects = 2
SccEnterpriseProvider = {4BA58AB2-18FA-4D8F-95F4-32FFDF27D184C}
SccTeamFoundationServer = http://oxy:8080/tfs/projects
SccLocalPath0 = .
SccProjectUniqueName1 = Accounts\\Accounts.vbproj
SccProjectName1 = Accounts
SccLocalPath1 = Accounts
EndGlobalSection
I tried this, but not working:
# GlobalSection(TeamFoundationVersionControl) = preSolution
# SccNumberOfProjects = 2
# SccEnterpriseProvider = {4BA58AB2-18FA-4D8F-95F4-32FFDF27D184C}
# SccTeamFoundationServer = http://oxy:8080/tfs/projects
# SccLocalPath0 = .
# SccProjectUniqueName1 = Accounts\\Accounts.vbproj
# SccProjectName1 = Accounts
# SccLocalPath1 = Accounts
# EndGlobalSection
P.S.: I tried a single line comment using "#" - that works. And removing whole section also works. But I don't want to delete It, just comment It.
I don't think there is an official definition of comments in the .sln file. It depends on the parser.
In principle, a .sln file is a declarative file, based on the keywords (ProjectSection, EndGlobalSection) and the end-line char. I don't see a uniform format description.
MSBuild
So we don't know how Visual Studio reads the .sln file, but you can see in the msbuild code that any line that doesn't start with one of the const words will not enter to the object:
while ((str = ReadLine()) != null)
{
if (str.StartsWith("Project(", StringComparison.Ordinal))
{
ParseProject(str);
}
else if (str.StartsWith("GlobalSection(NestedProjects)", StringComparison.Ordinal))
{
ParseNestedProjects();
}
else if (str.StartsWith("GlobalSection(SolutionConfigurationPlatforms)", StringComparison.Ordinal))
{
ParseSolutionConfigurations();
}
else if (str.StartsWith("GlobalSection(ProjectConfigurationPlatforms)", StringComparison.Ordinal))
{
rawProjectConfigurationsEntries = ParseProjectConfigurations();
}
else if (str.StartsWith("VisualStudioVersion", StringComparison.Ordinal))
{
_currentVisualStudioVersion = ParseVisualStudioVersion(str);
}
else
{
// No other section types to process at this point, so just ignore the line
// and continue.
}
}
Visual Studio
According to this blog comments are done by "#"
That is not accurate. You can add lines with any text where you want, without the #, and the file will stay correct.
So, in Visual Studio, you currently don't know the official format, but you need to "break" the current format.
You can try changing the keywords, such as adding a letter to them at the beginning.
From what I've tried, special characters (such as #, %) don't break your keywords.
I am developing an extension for visual studio code using language server protocol, and I am including the support for "Go to symbol in workspace". My problem is that I don't know how to select the matches...
Actually I use this function I wrote:
function IsInside(word1, word2)
{
var ret = "";
var i1 = 0;
var lenMatch =0, maxLenMatch = 0, minLenMatch = word1.length;
for(var i2=0;i2<word2.length;i2++)
{
if(word1[i1]==word2[i2])
{
lenMatch++;
if(lenMatch>maxLenMatch) maxLenMatch = lenMatch;
ret+=word1[i1];
i1++;
if(i1==word1.length)
{
if(lenMatch<minLenMatch) minLenMatch = lenMatch;
// Trying to filter like VSCode does.
return maxLenMatch>=word1.length/2 && minLenMatch>=2? ret : undefined;
}
} else
{
ret+="Z";
if(lenMatch>0 && lenMatch<minLenMatch)
minLenMatch = lenMatch;
lenMatch=0;
}
}
return undefined;
}
That return the sortText if the word1 is inside the word2, undefined otherwise. My problem are cases like this:
My algorithm see that 'aller' is inside CallServer, but the interface does not mark it like expected.
There is a library or something that I must use for this? the code of VSCode is big and complex and I don't know where start looking for this information...
VSCode's API docs for provideWorkspaceSymbols() provide the following guidance (which I don't think your example violates):
The query-parameter should be interpreted in a relaxed way as the editor will apply its own highlighting and scoring on the results. A good rule of thumb is to match case-insensitive and to simply check that the characters of query appear in their order in a candidate symbol. Don't use prefix, substring, or similar strict matching.
These docs were added in response to this discussion, where somebody had very much the same issue as you.
Having a brief look at VSCode sources, internally it seems to use filters.matchFuzzy2() for the highlighting (see here and here). I don't think it's exposed in the API, so you would probably have to copy it if you wanted the behavior to match exactly.
I am having a model which takes two input & multiplies them & give the output.
output_1 = input_1 * input_2
I have declared my simulink signals as CustomStorageClass= GetSet
input_1 = Simulink.Signal;
input_1.CoderInfo.StorageClass = 'Custom';
input_1.CoderInfo.CustomStorageClass = 'GetSet';
input_1.CoderInfo.CustomAttributes.GetFunction = 'Get_input_1';
input_1.CoderInfo.CustomAttributes.SetFunction = 'Set_input_1';
input_1.CoderInfo.CustomAttributes.HeaderFile = 'signals.h';
input_2 = Simulink.Signal;
input_2.CoderInfo.StorageClass = 'Custom';
input_2.CoderInfo.CustomStorageClass = 'GetSet';
input_2.CoderInfo.CustomAttributes.GetFunction = 'Get_input_2';
input_2.CoderInfo.CustomAttributes.SetFunction = 'Set_input_2';
input_2.CoderInfo.CustomAttributes.HeaderFile = 'signals.h';
output_1 = Simulink.Signal;
output_1.CoderInfo.StorageClass = 'Custom';
output_1.CoderInfo.CustomStorageClass = 'GetSet';
output_1.CoderInfo.CustomAttributes.GetFunction = 'Get_output_1';
output_1.CoderInfo.CustomAttributes.SetFunction = 'Set_output_1';
output_1.CoderInfo.CustomAttributes.HeaderFile = 'signals.h';
Now I am trying to convert my model to code using simulink coder.
In code generation setting of the model i have selected ert.tlc file in the system target file settings.
But the generated code does not have a Get_input_1() or Get_input_2() call like shown in this link.
http://www.mathworks.com/help/ecoder/ug/getset-custom-storage-classes.html
What i have missed in the setting. Please suggest
I know you probably already solved this issue, but I have also seen this behavior before.
Sometimes MATLAB does not update the header files correctly. If you had set a different configuration for your variable and then made a change involving the header files, I would recommend erasing the *_ert_rtw and slprj folders (they will appear again). It is similar to doing a "Make clean" operation, to ensure that everything is brand new.
I am trying to plot bars for String categories with Wisp. In other words, I have a string (key) and a count (value) in my repl and I want to have a bar chart of the count versus the key.
I don't know if something easy exists. I went as far as the following hack:
val plot = bar(topWords.map(_._2).toList)
val axisType: com.quantifind.charts.highcharts.AxisType.Type = "category"
val newPlot = plot.copy(xAxis = plot.xAxis.map {
axisArray => axisArray.map { _.copy(axisType = Option(axisType),
categories = Option(topWords.map(_._1))) }
})
but I don't know if it works because I don't find a way to visualize newPlot. Or maybe adding a method to the Wisp source implementing the above is the way to go?
Thanks for any help.
PS : I don't have the reputation to create the wisp tag, but I would have...
Update: in wisp 0.0.5 or later this will be supported directly:
column(List(("alpha", 1), ("omega", 5), ("zeta", 8)))
====
Thanks for trying out wisp (I am the author). I think a problem that you may have encountered is by naming your variable plot, you overrode access to the plot method defined by Highcharts, which allows you to plot any Highchart object. (now that I see it, naming your plot "plot" is an unfortunately natural thing to do!)
I'm filing this as a github issue, as category names are very common.
This works for me. I used column for vertical bars:
import com.quantifind.charts.Highcharts._
val topWords = Array(("alpha", 14), ("beta", 23), ("omega", 18))
val numberedColumns = column(topWords.map(_._2).toList)
val axisType: com.quantifind.charts.highcharts.AxisType.Type = "category"
val namedColumns = numberedColumns.copy(xAxis = numberedColumns.xAxis.map {
axisArray => axisArray.map { _.copy(axisType = Option(axisType),
categories = Option(topWords.map(_._1))) }
})
plot(namedColumns)
producing this visualization:
(You could also consider creating one bar at a time, and use the legend to name them)
I've read a little about sed and awk, and understand that both are text manipulators.
I plan to use one of these to edit groups of files (code in some programming language, js, python etc.) to make similar changes to large sets of files.
Primarily editing function definitions (parameters passed) and variable names for now, but the more I can do the better.
I'd like to know if someone's attempted something similar, and those who have, are there any obvious pitfalls that one should look out for? And which of sed and awk would be preferable/more suitable for such an application. (Or maybe something entirely else? )
Input
function(paramOne){
//Some code here
var variableOne = new ObjectType;
array[1] = "Some String";
instanceObj = new Something.something;
}
Output
function(ParamterOne){
//Some code here
var PartOfSomething.variableOne = new ObjectType;
sArray[1] = "Some String";
var instanceObj = new Something.something
}
Here's a GNU awk (for "gensub()" function) script that will transform your sample input file into your desired output file:
$ cat tst.awk
BEGIN{ sym = "[[:alnum:]_]+" }
{
$0 = gensub("^(" sym ")[(](" sym ")[)](.*)","\\1(ParameterOne)\\3","")
$0 = gensub("^(var )(" sym ")(.*)","\\1PartOfSomething.\\2\\3","")
$0 = gensub("^a(rray.*)","sA\\1","")
$0 = gensub("^(" sym " =.*)","var \\1","")
print
}
$ cat file
function(paramOne){
//Some code here
var variableOne = new ObjectType;
array[1] = "Some String";
instanceObj = new Something.something;
}
$ gawk -f tst.awk file
function(ParameterOne){
//Some code here
var PartOfSomething.variableOne = new ObjectType;
sArray[1] = "Some String";
var instanceObj = new Something.something;
}
BUT think about how your real input could vary from that - you could have more/less/different spacing between symbols. You could have assignments starting on one line and finishing on the next. You could have comments that contain similar-looking lines to the code that you don't want changed. You could have multiple statements on one line. etc., etc.
You can address every issue one at a time but it could take you a lot longer than just updating your files and chances are you still will not be able to get it completely right.
If your code is EXCEEDINGLY well structured and RIGOROUSLY follows a specific, highly restrictive coding format then you might be able to do what you want with a scripting language but your best bets are either:
change the files by hand if there's less than, say, 10,000 of them or
get a hold of a parser (e.g. the compiler) for the language your files are written in and modify that to spit out your updated code.
As soon as it starts to get slightly more complicated you will switch to a script language anyway. So why not start with python in the first place?
Walking directories:
walking along and processing files in directory in python
Replacing text in a file:
replacing text in a file with Python
Python regex howto:
http://docs.python.org/dev/howto/regex.html
I also recommend to install Eclipse + PyDev as this will make debugging a lot easier.
Here is an example of a simple automatic replacer
import os;
import sys;
import re;
import itertools;
folder = r"C:\Workspaces\Test\";
skip_extensions = ['.gif', '.png', '.jpg', '.mp4', ''];
substitutions = [("Test.Alpha.", "test.alpha."),
("Test.Beta.", "test.beta."),
("Test.Gamma.", "test.gamma.")];
for root, dirs, files in os.walk(folder):
for name in files:
(base, ext) = os.path.splitext(name);
file_path = os.path.join(root, name);
if ext in skip_extensions:
print "skipping", file_path;
else:
print "processing", file_path;
with open(file_path) as f:
s = f.read();
before = [[s[found.start()-5:found.end()+5] for found in re.finditer(old, s)] for old, new in substitutions];
for old, new in substitutions:
s = s.replace(old, new);
after = [[s[found.start()-5:found.end()+5] for found in re.finditer(new, s)] for old, new in substitutions];
for b, a in zip(itertools.chain(*before), itertools.chain(*after)):
print b, "-->", a;
with open(file_path, "w") as f:
f.write(s);