I have a new internet service provider, and thus a new broadband router, a Sagemcom Fast 3890. I have some Raspberry Pis on the inside, that I need to open to the internet, so I've set up some port forwarding. However, when I activate port forwarding, local access is no longer possible.
Example: I configure the Pi on 192.168.0.15 as a web server. I can access http://192.168.0.15/ and see the web page. When I activate port forwarding, I can now see the web page on my external IP address, but I no longer get a response from http://192.168.0.15/ - the request simply times out.
This is a basic Raspbian install, nothing funny. Only thing is my broadband router is new. Is this a feature or a bug?
This is obviously just the behavior of some broadband routers.
How can i host a website through my computer using server softwares?
I tried to host a website through my own computer using apache tomcat server but it didnt work ( please briefly explain every point )
The main issue that you need to deal with is getting the clients to your computer.
Yes, it is possible and yes I have done it, albeit a while ago.
You need to see if you can browse to your computers website from another device on your network, this will ensure that apache is working. Try another computer/laptop/tablet/whatever to see if this site reachable by other computers using the IP Address and possibly port number. If you cannot get to the site, there are settings in apache to deny certain ip's, google it to get the exact steps for your version. If it works, move on to step 2.
You will need a static IP Address to ensure that all further steps stay working, google this if you are not sure how to do it
You need to have the external IP address of your router(whatsmyip.org) or use Dynamic DNS to route traffic from an address to your ip and there are services that allow this. I can recommend no-ip.com - This is all assuming that you have access to the router.
You would be required to set up port forwarding on your router. This will direct the internet traffic to your computer. You will need to get the exact instructions for your specific model of router.
Please be aware that you need to have proper firewalls and systems in place to prevent attacks. I am sure that you are just testing at this point though...
All the best!
I wanna use oVirt engine 3.6 in my Internet connectionless network. I installed oVirt with yum over internet. After that I tried to work offline. When I go offline Web Interface it still works fine. But I connected it to my local netowork Interface starts not to respond. I check POST/GET requests that made by it and I see it stuck on request/respond to/from GenericApiGWTService. For example, normally time between request and respond takes 1 to 600ms but when I connect it to local network it take up to 300.000ms second and eventually it fails. I use CentOS 7 x86_64. I couldn't figure out what is it cause to that.
I fix the problem by;
Use another IP from different address group then the one you use for
internet connection. Example: I used 192.168.1.10 for internet
connection. When I connect pc to local I changed it to 192.168.2.10
Delete all Gateway and DNS IPs.
Then it works fine.
I have a Gwan server set up at home on my Arch Linux box. I'm running "motion". I have a router that, of course, handles my external IP address.
I want to access the avi movie shorts generated by motion through port 1000 which is port forwarded through my router to the box on my internal network. I've written an event_end script that copies these motion videos to my Gwan "Document Root". I've set the particular directory up according to the Gwan docs and can see these videos using the external ip address:1000 just fine when I'm at home. But when I click on the very same link from the machine at my office, I get this error message in Firefox: "Firefox can't establish a connection to the server at 99.99.99.99:1000.".
So I don't understand why I can see that link when I'm at home but not from anyplace else. What setting have I missed?
Thanks.
Are you sure that your firewall at work allows traffic on port :1000 at all?
port 1000 which is port forwarded through my router to the box on my internal network [at home]... but I get an error "Firefox can't establish a connection to the server at 99.99.99.99:1000" [from my office].
As Pete noticed, this sounds like a routing error.
As the HTTP client, Firefox, cannot even establish a connection, the problem happens before G-WAN can do anything.
while I was using quickserve, I could view those videos just fine while using port:1000
...probably from your private network at home, and not from your office.
If quickserve was available from your office then, since then, you have messed with the router port mapping OR with the G-WAN listener (hence the connection failure).
Unfortunately, since G-WAN won't receive anything until you get this right, its log files won't help.
And as you do not provide any information about your port mapping and G-WAN listener, we can't help you to spot obvious errors.
Note that this issue is a system configuration problem and has little to do with the G-WAN application server itself (remember that Stackoverflow is a Q&A site for developers). The Serverfault site might be a better place to discuss your problem.
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.