How can i host a website through my computer using server softwares?
I tried to host a website through my own computer using apache tomcat server but it didnt work ( please briefly explain every point )
The main issue that you need to deal with is getting the clients to your computer.
Yes, it is possible and yes I have done it, albeit a while ago.
You need to see if you can browse to your computers website from another device on your network, this will ensure that apache is working. Try another computer/laptop/tablet/whatever to see if this site reachable by other computers using the IP Address and possibly port number. If you cannot get to the site, there are settings in apache to deny certain ip's, google it to get the exact steps for your version. If it works, move on to step 2.
You will need a static IP Address to ensure that all further steps stay working, google this if you are not sure how to do it
You need to have the external IP address of your router(whatsmyip.org) or use Dynamic DNS to route traffic from an address to your ip and there are services that allow this. I can recommend no-ip.com - This is all assuming that you have access to the router.
You would be required to set up port forwarding on your router. This will direct the internet traffic to your computer. You will need to get the exact instructions for your specific model of router.
Please be aware that you need to have proper firewalls and systems in place to prevent attacks. I am sure that you are just testing at this point though...
All the best!
Related
I have developed Yii2 CRUD application using models, controllers and views. It is used locally on PC. I wanted the users to use it online.
For eg. I have www.example.com and I wanted to make this yii2 CRUD application available on this site. What are the steps?
Your question is not very specific, therefore you haven't received an answer. I'm assuming you are asking about how to use your local PC as the server for an online site. Otherwise please clarify your question.
You will need to do the following steps:
Point the domain name to the public IP address behind which your local PC is sitting. You can find that by going here: http://whatismyipaddress.com/
In your router you need to set up port forwarding (NAT rules) for port 80 (or 443 if using https) to your computer's local IP address.
Depending on your Apache configuration (or whatever webserver you are using) you need to ensure it serves the right website. This is too broad a subject that I can give you any details here.
Note that you are now opening up your local computer to the Internet and hence you should be aware of the security implications it has.
I installed usbwebserver
everthing is running, I am trying to reach the root page index.php?
I read everything I possibly can and sorry but I still cant figure out how to reach my localhost
I reach my page with localhost:8080 and the page I want shows up but if I replace it with IP:8080 it does not.
I am trying to reach this page outside of my local network.
I'm sorry, I need to provide you a separate answer for your reformatted question for the "down the street" scenario. I can troubleshoot a few of the issues you're probably having.
ISP's don't typically allow residential internet connections to serve resources over port 8080, or 80. Even if you were to configure your computer as needed, if you're on a standard internet service provider they're probably blocking you in the middle even if you have punched holes all your local security in an attempt to serve assets over port 8080/80.
Assuming they don't allow that you're going to have to first configure your outbound middleware(php in your case) to listen to calls into your ip on a different port. ( You can do this in your C:\WAMP\ folder, in the "wampserver" configuration file. Here's a good walkthrough here: (http://forum.wampserver.com/read.php?2,13744)
Now, you're going to have to drop any firewalls windows/ubuntu/macOS are providing on that port. (This is the part where you've rolled out the red carpet for hackers to get into your box(es) so be careful!) Here's a link for a short and sweet explanation on windows here: (http://yourbusiness.azcentral.com/turn-off-windows-firewall-19396.html) Note that you can open individual ports, you don't have to drop your entire firewall.
Make sure you have opened up access to any folders/mySQLdb's/resources to outside requests as well (seriously, this is a REALLY bad idea from an #home server if you don't know what you're doing)
Then figure out the correct ip and the correct port and give it a go! If it still doesn't work you can download a program like [wireshark] (https://www.wireshark.org/download.html) or [fiddler] (http://www.telerik.com/download/fiddler/fiddler2) to debug your inbound/outbound traffic and see what the machine's seeing before your browser/server gives you any user visible information.
One thing to note, if you are an amateur web developer your homepage is called "index.html" not "home.html" "home.html" only works fine locally, but internet browser engines look by default, for "index.html"
Lastly, and I really can't stress this enough don't host through your personal ISP and serve files from your own machine. Hosting through Fatcow, or hostgator, or any of the other hosts is really honestly dirt cheap and they know far better than you or I do about security.
That said, I hope very much that you succeed in using my answer, or at the very least learning something from it. Happy Coding!
http://www.canyouseeme.org/
--
Read the Background session
go to a command line, type "ipconfig"
Hit Enter.
Under "Ethernet adapter Ethernet:
It should be the third line down, has your following:
IPV4 Address : 192.168.1.xxx where "xxx" is your ip
address.
USE "//" + "the ip address shown for (ipv4)" plus ":8080" and your default page
should show just fine.
For example, if your cmd "ipconfig" for this process reads: "192.168.1.12"
your total URL in your browser will be "//192.168.1.12:8080"
Note that I used 2 forward slashes prior to using an IP address on your
local network. That let's your computer know it's using your network, not
the actual internet. The slashes alone may solve your problem. Also note, if you're accessing a database through your webapp, you will also need to properly configure your db settings to allow access.
First find your outside ip adress not local ip. After that go into router panel and open to use from apache server. Anyone able to access that port now. You can connect outside your local website now. If you can't do that. Try again. This is the way to doing this.
EDIT: Ugh I forgot to put this on Server Fault...
I have an Azure VM that is hosting a web application.
The application will be accessible via the VM's IP address:
http://191.238.112.62
I want to be able to use query strings to redirect to completely different sites that are within the local IIS. For example:
http://191.238.112.62/?site=1
would redirect to
www.site1.com
The way I have structured IIS can be seen below:
Each site has an entry in the systems host file.
127.0.0.1 wwww.site1.com
127.0.0.1 wwww.site2.com
127.0.0.1 wwww.site3.com
There is likely a better way to achieve what I am going for here so any pointers would be greatly appreciated.
Thanks.
Here is how I would do it. Not sure why you want to use query strings for this as IIS is made to do that if you configure it properly.
In your DNS server register all your websites to point to that IP. This is for when you go live. For development the hosts file is a good solution.
When you create the websites add a Host header like below
Now try loading any website by their full name
http://www.site1.com
http://www.site2.com
http://www.site3.com
Here is more info about IIS host headers.
Again, when you go live make sure you have the DNS set up for all the websites to point to the IP address of your server.
Hope this helps.
Edit based on comment:
Right, here is how I solved this in the past.
You can do all this with the hosts file but it's less painful if you have a proper DNS server to resolve the names.
The basic idea is to use slightly different URLs for development on the local machine.
All devs would have site1.com point to the IP of the shared server and site1.com.local point to 127.0.0.1. So a hosts file on a developer machine would look something like:
191.238.112.62 www.site1.com
127.0.0.1 www.site1.com.local
On all development machines you need to make sure you have the .local host header for all sites.
On the shared server you just need to add the right host headers and no hosts file changes. It's actually a bad idea to change the server hosts file.
I am writing an application with C++ to connect to my server.
I am using gethostbyname(). It is working fine when I give host name as 'localhost'. but if i try any other site like google.com, it fails.
Can anyone please tell me what could be going wrong.
I can access those websites through browser. Note: I have proxy set up in my browser.
Is thr proxy causing issue with gethostbyname()? if yes, how can I mention proxy in my C++ code?
Based on what you describe in your question, it appears that your machine is on a corporate network that is firewalled off the Internet, all access to the web is via a web proxy, and that your network does not have Internet DNS resolution.
Even if you managed to succeed in resolving an IP address, you will not be able to make an outbound connection, unless your firewall offers a Socks proxy, or an equivalent.
If your intent is to write a client that accesses web sites via HTTP, you will need to use your corporate HTTP proxy to do that. Contact your system administrator for more information.
Im just wondering, can 2 or more different external hostname/DNS redirect to multiple local servers but same port?
Let's see, I have 2 DNS internet domain for an example, myserver1.com and myserver2.com, and both I have same A record to my forwarded server IP (e.g: 102.123.123.123). Under my server which only has 102.123.123.123 IP address has 2 application servers but instead of trying to make they work, I use different port for each server applications for an example, serverApp1 listening to 0.0.0.0:2010, serverApp2 listening to 0.0.0.0:2020
My point is, is there any way or how to forward my myserver1.com:2000 to serverApp1 (port 2010), and myserver2.com:2000 to serverApp2 (port 2020) but both myserver1.com and myserver2.com has a same A record?
Im quite sure either it is in iptables or /etc/hosts or BIND issues, but guide me if I missed something. And by the way, the servers and DNS records are accessible from the internet which is the firewalls are configured properly. Thanks.
I don't have much experience in that, but I think you will need a third server/firewall/proxy listening for the incoming host and route it accordingly.
Again, I don't have much experience in that, so I'm not sure if the firewall is able to do that.
I think you can use redirection servers like apache.
In my application we want to access lot of intranet servers from internet. So what we did, we configured a apache with all the mappings in httpd.
So when ever a request to apache comes, it will be redirected appropriately.
For example - I have two servers or hostname in intranet : 1) abc.com:7300/context1
2) xyz.com:8900/context2
We configured a apache with host name abcxyz.com:9000. When a request like
abcxyz.com:9000/context1 comes it will be redirected to abc.com:7300/context1 and when a request like abcxyz.com:9000/context2 comes it will be redirected to xyz.com:8900/context2.
In your case since the requests are going through the single server (102.123.123.123), you can use redirection.
Hope it helps.