I'm new to Magnolia, and I'm making my own module.
I have a dialog box when adding a component and I want to change next fields below dynamically using a select field.
Example:
Select field with {"type 1", "type 2", ...}
IF "type 1" is selected
->show a text field below
ELSE
->show a basicUpload field below
Thanks in advance.
I believe same was already discussed here and few other places if you look over questions tagged "magnolia".
Long story short, fields are atomic, independent entities. They do not know about each other. So the only way to create such dynamic connection is over "parent" form. You need to extend form presenter and field factory (if you want select that would be SelectFieldFactory) and in there, when field is created, attach value changed or similar listener to it so when value is changed in the field, you can inform presenter to make some other field visible or hide it.
IIRC you can see example of that done in External Forms module (if you have access to enterprise code). Not sure if any of the community modules show the same.
Related
I have a custom page type, and the editor will have the option to enter the following
Image (from media library)
Video (from media library)
YouTube video ID
The field names are as follows
SlideImage
SlideVideo
YouTubeVideoID
So, if an editor ads a SlideImage, SlideVideo and YouTubeVideoID should not be usable. Same for SlideVideo and YouTubeVideoID.
Within the Visibility Condition fields, i'm going to assume a macro is needed for this. My logic is:
This field visible if Field A or B have data.
A possible approach can be to add an additional field, which determines the field that should be used.
Create a text field (let's say, SlideType) and use a radio button form control with your options:
image;Image
video;Video
youtube;YouTube
Tick the "Has depending fields" checkbox for this field, and tick the "Depends on another field" checkbox for the SlideImage, SlideVideo and YouTubeVideoID fields.
Your visibility conditions would then be simplified, instead of checking the values of multiple fields.
For example, the visibility condition for the SlideVideo field would be:
SlideType == "video"
This has a few benefits:
Easy to add new fields and configure the visibility conditions
Easy to check what needs to be rendered in the front-end - in your repeaters and other webparts, you can simply have conditional statements on the SlideType field to determine which field to use
Intuitive for the end user - the interface makes it clear which field is being used
Add this to Visibility condition in Page type field edit:
Fields.SlideImage.Value == String.Empty
Do not forget to set proper Has depending fields and Depends on another field properties depending on your needs. You can learn more about these properties here.
Let's say the column name on which this value of your depending field is "FirstName", so you can write in the dependent field -> Visibility Condition as
FirstName.value != ""
or
FirstName.value
You can twist the conditions for as many conditions as possible and can club more than one condition too.
I am also sharing links with you having a lot of examples from Kentico support
Dependency fields in Kentico
Using dependency fields in forms
Cheers,
Chetan
I have created a form in orbeon form builder which has three 30 questions which are belongs to 3 categories. Now I don't want to show all the 30 questions to every one also I don't want to create different forms for each category because all these categories belongs to one module.
While adding the form I have a drop down question like "Select Category". If user select the first category then I need to display only first category related questions and hide the second and third category related questions.
Is there any way to achieve my task in Form Runner?
UPDATE:
#ebruchez, I have followed your suggestion, I tried testing this feature on default "contacts" form. I have created a new text field in the contact form named "Account Related Field" as a label and "control-10" as Control Name. Below is the screen shot for the same.
Then After that I clicked on control setting of the "Account Related Field" and under the "Formulas" tab I have added the following XPath expression in "Visibility" section. $topic='Account' following is the screenshot.
After adding the path expression I saved the contact form and published. Then I tried opening the form in form runner. But I am not able to view the "Account Related Field" field on UI after selecting the "topic" value is "Account" in the form runner. This is the screenshot of form runner after publishing form in form builder.
Did I miss something. Please help to resolve the issue. I need to view "Account Related Field" field only if "topic" field value is "Account"
Thanks in advance.
Yes you can, by using a "Visibility" formula under the section settings. For example if your dropdown is named foo and has two entries, category1 and category2, then you can write:
$foo = 'category1'
to make the section visible only if the dropdown selected category1, and:
$foo = 'category2'
to make the section visible only if the dropdown selected category2.
This doc might help.
I'm working with Symfony2 to set up a form, where a Shelf-Entity can be edited.
A shelf contains a collection of Readable-Entities (e.g. Book, Magazine, etc. - all inherit from Readable).
The user has the possibility to add more Readable-Entities (the form is extended via JavaScript) and from a dropdown he can select the type of Readable he wants to add. Depending on the selected dropdown-value, different form fields are rendered. So far so good.
Now, when the form is submitted to the server, depending on the Readable-Type the user selected in the form, a different entity-type should be instantiated.
If I don't do anything, Symfony just instantiates the base class Readable (and not Book, Magazine, etc.).
How can I tell Symfony to instantiate the correct type of Readable depending on the selected value from the dropdown?
I tried with FormEvent-Listeners, but:
in PRE_SUBMIT I only get an array containing the "raw" form data with $event->getData(), i.e. no entities have been instatiated so far. However, at this stage, I still have access to value of the dropdown.
in SUBMIT the form data was already assigned to the appropriate entities. Also the new Readable was already instatiated with the base Readable-Class. But now, I cannot access anymore the value from the dropdown.
What is the correct way to do this?
EDIT
Added a minimal Code-Example for the Shelf FormType:
https://gist.github.com/anonymous/401495b701982adafb96
Code for infinite_form_polycollection:
https://gist.github.com/anonymous/b5f0ed10ca9c52177f01
Have you tried looking at this part of the doc? As "embedding a form" seems to fit your needs.
It seems that there was something wrong with the PHP-Files of the PolyCollection in the vendor-directory, because after removing everything related to the Infinite Form Bundle from the vendor-dir and reinstalling it with composer, everything is working now. But thanks for your efforts YoannCh
I tried to use "table" Component in a Form with "Resource Editor" in lwuit, but I could not add/edit the rows items. so I end up with this question:
Is it possible to create/edit the table component in the generated "StateMachine" class in Netbeans and see the result in "Resource Editor"?
And if it's not possible, how can I hack the .res file in order to make the "table" as it should be?
There is support for live embedding in the resource editor but its deprecated and obtuse.
I suggest you just add a label where you want the custom component to be, give it a unique name and override the method createComponentInstance which is invoked internally with the name of the label (name it something unique).
You can then just return the instance of your custom made component and it will appear where the label is in the GUI builder.
I'm making an InfoPath form which is tied to an Access database. I have a set of radio buttons where the user selects the software name corresponding to the form, but I store this in my database as a number (1, 2, or 3). In another view, I want them to be able to see the previously entered software name, but not be able to change this. Here are the two options I've thought of:
Create some rule that does prevents the user from changing this data
This seems like the natural approach for what I want to do.
Add a text field with a function mapping each number to the corresponding software
As the form is tied to the database, InfoPath wants all fields to be tied to a database value, which would require creating another database entry. I'm also having trouble finding an InfoPath function I can use to handle this mapping.
Change the radio box's variable to text values and make a text box in the new view, which can be made read-only.
I'd really prefer not to do this, as it will make things messier for other programs using this database value and seems wasteful, but if nothing else works, this seems do-able.
Is there some sort of rule/method I could use to make this radio button control read-only?
You can use conditional formatting to disable any control (including radio buttons).
To set your control to always be disabled do the following:
Right click on your control and select Conditional Formatting...
Click Add...
In the leftmost dropdown select The expression
type true() in the text field (this tells InfoPath to always apply this formatting)
Check the Disable this control checkbox.
Click OK and OK.
Note: You will need to do this for each of your radio buttons.
Also, for future reference: If you simply want to display the result of a function (such as in your second solution) you don't need to use a text box. You can use an expression box. An expression box is not necessarily linked to a field in the datasorce, so you won't need an additional column in your database for it.