I successed in cas 4.2.x via this document:
https://apereo.github.io/cas/4.2.x/installation/Configuring-LongTerm-Authentication.html
many changes in cas 5.1.x ,now I want to upgrade to 5.1.x . Readed many documents,but still confused. like . where is <var name="credential" class="org.jasig.cas.authentication.UsernamePasswordCredential"/> etc.
I don't know how to config it . any one master it? or tell me the document where it is . Thanks.
Since you asked about the document and its location, the guide is here
https://apereo.github.io/cas/5.1.x/installation/Configuring-LongTerm-Authentication.html
Follow the guide and adjust your settings appropriately. There is no need for xml.
Related
I have the following problem:
After trying to change the entry point to my website in the backend of my TYPO3 system (by using the site config), I cannot access neither my backend nor my frontend of the website anymore. Whenever I try to access the site it says "Oops, an error occurred! The parsedUri "https://" appears to be malformed".
What I have tried, is accessing the config.yaml on my webserver to change the baseURL inside of the config, but no matter what I change it to, it doesn't seem to work, as I always get the same error message even uploading the changed config file (what I mean by that is, that the text inside the error message doesn't change to reflect the new url but stays "https://").
I hope that someone who is more experienced in TYPO3 can help me solve this issue. I couldn't really find a working solution after extensively searching so far. Thanks a lot in advance.
After changing the yaml file of the site configuration, you need to clear all caches, either via the install tool (yourdomain.tld/typo3/install.php) or by deleting all files in the directories var/cache/code and var/cache/data.
In previous versions of AEM, certainly in CQ 5.6 and AEM 6.0, it was possible to tail the error logs over HTTP, without connecting to the server over SSH.
For example, I could get the last 1000 lines from the error log of my AEM author instance by calling:
http://localhost:4502/bin/crxde/logs?tail=1000
This seems to no longer be possible in AEM 6.2, this path does not resolve to anything.
Is there another way I could still tail the log over HTTP?
A colleague answered this question for me on a chat so I'm putting it here to make it easier to find in the future.
There's now a neat utility in the OSGi console that allows one to view the logs as well as configure the various loggers. You can find it at http://localhost:4502/system/console/slinglog
The Appender tab provides links to the various log files that can be used to load logs over HTTP.
Here's an example request it makes:
http://localhost:4502/system/console/slinglog/tailer.txt?tail=1000&name=%2Flogs%2Ferror.log
As you can see, both the log file name and the tail parameter can be specified. You can also use grep with both simple phrases and regular expressions.
This is a built-in feature of Apache Sling.
In addition FYI, you can also find the status-slinglogs where you can perform log file downloads in a zip and logger actions in a txt to your local at /system/console/status-slinglogs
http://localhost:4502/system/console/status-slinglogs
and the direct urls for the downloading these zip files are as below
http://localhost:4502/system/console/status-slinglogs.zip
http://localhost:4502/system/console/status-slinglogs/configuration-status-20170126-183246.zip (where as 20170126-183246 is and time stamp)
You should not be looking at log files via CRXDE lite.
log files in 6.2 are project specific - better to open them from a text editor.
see attached screenshot.
Hope this helps!
Regards,
Prince
You can curl the log with e.g.:
curl -u admin:admin 'http://localhost:4502/system/console/slinglog/tailer.txt?tail=4000&name=%2Flogs%2Ferror.log'
where 4000 is the number of lines you want to get.
I recently wrote a tool named "Log Tailer Plus" to solve exactly this problem. It's entirely free/open source - Take a look at a post describing usage here : https://blogs.perficientdigital.com/2019/05/14/introducing-aem-logtailerplus/
TLDR; You can grab an AEM package from here ( https://github.com/prftryan/LogTailerPlus ) install it to your machine, and access via http://localhost:4502/log-tailer-plus (if local) or http://server:port/log-tailer-plus
This tool will allow you to follow any number of logs at once by leveraging the out of the box logging endpoint(/system/console/tailer ) as well as dynamically checking active OSGI Logging Logger configurations. Currently, highlighting is supported, but only for relatively standard logging patterns (it's done via regex).
This is a new release, works on AEM 6.2+. Enjoy
I'm working on setting up and migration of old sites to a new server from Dreamhost. I have 130 sites to migrate. 1 is successful. The version is: 1.12.1
The mods in the first site upgraded well. No problems. Have a procedure to migrate. That being said, the second site, as I followed my own documentation, fails when I try to access /admin/index.php
What I get is this below:
So, this is more informational than code... so please forgive me. I don't understand why CMS MADE SIMPLE is actually not simple.
That seems like an annoying issue. Forgive any repetition but here is what I would check:
that is is 100% functioning on existing server
correct php version 5.4.3+ (5.6+ recommended) on new server
that all files & database are copied fully & without errors
config.php settings are updated for new hosting & database
that .htaccess, php.ini/.user.ini settings are appropriate
check php error log
are there any additional modules installed that may require additional php modules
try more coffee or a nights sleep - both have helped me solve all sorts of issue in the past!
consider posting on CMSMS forum - will get a wider range of CMSMS users/experience and suggestions
Good luck
Chris
Not sure what process you are using. So presuming that the site was working correctly on existing hosting and that the new hosting meets recommended requirements, especially PHP version:
Export database
Zip/Compress all website files into a single file
Copy zipped file to new hosting
Create new database & user with full access
Unzip files and make sure that they are in the right location (probably website root)
CHMOD config.php to 0644 and edit database, username & password settings for new hosting, CHMOD back to 0444
Make sure .htaccess is using correct settings for new hosting
Login to admin and clear cache
Sorry that the instructions are so basic, but the process really is Simple.
Possible issues can occur if:
the PHP version is older than 5.4.3 (5.6+ recommended).
files copied individually using ftp and some are corrupted/not copied.
Apart from that it is pretty straight forward.
Hope it helps
Okay, so I had a working content model and share config in alfresco community 4.2.e. I had to reinstall alfresco and I updated to version 4.2.f. When I start tomcat I can log into alfresco, but when I try to load share it takes like 10 minutes to load and when it has loaded and I try to login it says "not availible or wrong login" after 3 minutes.
Here is the content model: http://pastebin.com/2wMJe3YL
.And the share config: http://pastebin.com/n1YK6i60
--edit1--
The alfresco.log: http://pastebin.com/PaiAUv9n
The alfrescotomcat-stdout(date).log: http://pastebin.com/RZ4fVJ8G
In the 2nd log I noticed it says refused connection, can the problem be that I changed some ports on the reinstallation from alfresco?
-- end edit1--
Alfresco does work with no content model and share config used and Alfresco works with the standard content model and share config.
Thanks in advance.
Solution: The problem was that I thought that the reinstall of alfresco would be enough to change the ports and it is, but I forgot to add some code in MY share config. The code I mean can be found here: https://wiki.alfresco.com/wiki/Changing_Default_Port_Configuration thanks to: Gagravarr
I have downloaded and installed Zend Server community edition. I am on a mac.
I have tried to changed the path in
/usr/local/zend/apache2/conf/httpd.conf
so that it pointed at a test file in my documents folder. However, when I type
http://localhost:10081/test.php
into my browser, I just get 404- page not found.
Any suggestions? I am new to web stuff and don't really know what I'm doing wrong.
You can find step by step directions for setting up your local environment on a mac:
http://www.cmiwebstudio.com/blog/zend-server-ce-for-mac-osx-10-lion/
and some other posts that may also help here:
http://www.cmiwebstudio.com/blog/tag/zend-server-ce/