I am newbie for Cent os. Installing phantomjs on Cent os. Followed below steps but still facing issue.
Steps :
curl -O https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-i686.tar.bz2.
tar xvf phantomjs-1.9.1-linux-i686.tar.bz2
cp phantomjs-1.9.1-linux-i686/bin/phantomjs /usr/local/bin
sudo yum install freetype
sudo yum install fontconfig
Above all steps completed successfully but when I try to hit phantomjs, it shows error "phantomjs: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory."
Thanks in advance.
Just make sure you successfully run
yum install fontconfig freetype freetype-devel fontconfig-devel libstdc++
and then try to install as usual.
To remove this error.
# sudo yum install fontconfig
If you are still facing the error, Run
# sudo yum install fontconfig freetype libfreetype.so.6 libfontconfig.so.1 libstdc++.so.6
Note :
If you are using ubuntu or debian, use apt-get install to install this package.
centos, NodeJS, html-pdf
sudo yum install fontconfig (worked for me)
Related
I cannot load VSCOde onto my old Toshiba laptop using Fedoa23. I follow the instructions from the web and finally get the message "No package code availale". I have previously installes VSCode on an old computer using Fedora23 but this time it does not work? Where do I go wrong?
Thanks.
Don't know, but this works for me.
You can use these step to install VSCode:
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
Then update the package cache and install the package using dnf (Fedora 22 and above):
dnf check-update
sudo dnf install code
Or on older versions using yum:
yum check-update
sudo yum install code
I followed the installation guide and installed all the packages mentioned. However, I end up with this error message while running ./configure
checking for osgEarth with CFLAGS=" -fPIC -fno-stack-protector " LIBS=" -losgEarth -losgEarthUtil"... no
configure: error: Cannot find osgEarth 2.7 or later. Set WITH_OSGEARTH=no in configure.user to disable this feature or install an up to date version of osgEarth.
Here is a link to my config.log file : config.log
Cannot find osgEarth 2.7 or later
osgearth 2.7 for Ubuntu 16.04 → https://launchpad.net/~ubuntugis/+archive/ubuntu/ppa →
sudo add-apt-repository ppa:ubuntugis/ppa
sudo apt update
sudo apt install libosgearth-dev // you get "2.7"
// All prerequisites :
sudo apt install g++ libxml2-dev libosgearth-dev bison flex clang swig libqt5opengl5-dev qt5-qmake openjdk-8-jre libopenmpi-dev tcl8.5-dev tk8.5-dev
Installing the libgeos-dev package, and then editing the configure.user file in my OMnet++ source directory solved my problem.
$ sudo apt-get install libgeos-dev
Change the line #OSGEARTH_LIBS= to this:
OSGEARTH_LIBS=" -losgEarth -losgEarthUtil -lgeos_c "
Make sure to remove the # in the beginning.
Now run:
$ . setenv
$ ./configure
And it should work..
Others have also faced this problem before and have the fix mentioned here solved their issues:
http://gmt.soest.hawaii.edu/boards/1/topics/4621
https://trac.osgeo.org/postgis/changeset/11363
Answered by Attila Török on the omnetpp google group (omnetpp#googlegroups.com)
While am compile using swift build, am getting following error in my Ubuntu machine
$swift build
/home/xxxxxxxxx/Downloads/swift-DEVELOPMENT-SNAPSHOT-2016-02-25-a-ubuntu15.10/us
r/bin/swift-build: error while loading shared libraries: libicuuc.so.55: cannot
open shared object file: No such file or directory
How can i fix this issue?
Thanks.
You can manually download the good .dep
wget http://security.ubuntu.com/ubuntu/pool/main/i/icu/libicu55_55.1-7_amd64.deb
Then you run:
sudo dpkg -i libicu55_55.1-7_amd64.deb
If it miss some dependency:
sudo apt-get -f install
It has worked for me.
Your can find the other architecture on the debian package website :
https://packages.debian.org/sid/libicu55
p.s: I know this is on SID, but this is the only version that I found
*note...packages may have been removed
Your system lacks a critical component for building Swift, libicu-dev.
Install this:
sudo apt-get install libicu-dev
But that was for building Swift from source. You were talking about building with Swift, my apologies.
Unfortunately it seems it won't work either: Swift for Linux only officially runs on Ubuntu 15.10 and 14.04, and you tell me in the comments that you're running 15.04.
I know there's tutorials on the web on how to make it work on Mint and other distros... But the best would be, if possible, that you update your install of course.
I searched on the net and find a list in debian packages that shows the libicuuc.so.55 file.
apt-get install libicu55
Will resolve the issue.
hallow_me's link to download libicu55_55.1-7_amd64.deb doesn't work.
Here are the latest links https://packages.debian.org/stretch/amd64/libicu57/download
Like
wget http://ftp.us.debian.org/debian/pool/main/i/icu/libicu55_55.1-7_amd64.deb
Then follow hallow_me's instruction to install it.
Try the followings lines
echo "deb http://security.ubuntu.com/ubuntu xenial-security main" | sudo tee --append /etc/apt/sources.list
sudo apt-get update
sudo apt-get install libicu55
I've followed the tutorial on SE as well as trying the extra steps from Hertaville and bootc but I still get the error that prompted the original SE question. I'm stumped.
I get five steps into the process before I get the error:
sudo apt-get install git rsync cmake lib32z1 lib32ncurses5 lib32bz2-1.0
git clone git://github.com/raspberrypi/tools.git
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin
. ~/.bashrc
arm-linux-gnueabihf-gcc -v
Error:
arm-linux-gnueabihf-gcc: error while loading shared libraries:
libstdc++.so.6: cannot open shared object file: No such file or directory
libstdc++.so.6 is present in all three directory trees mentioned in the tutorials as well as ./lib/x86_64-linux-gnu/libstdc++.so.6, but adding the relevant one to the path doesn't help (see below). I suspect there's a library path not being set, but I have no idea what that is.
I'm doing this in a virtual machine running Ubuntu 13.10 with netbeans and other tools, plus a LAMP stack installed. netbeans will build and run C/C++ executables just fine (and obviously IO can do the same from the command line).
Other things I've tried without success
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/lib
Hertaville suggest adding 32 bit architecture:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6-i386 lib32stdc++6 zlib1g:i386
And the "build-essential" package:
sudo apt-get install build-essential git
Which also didn't help. I've also rebooted just in case.
As expected the answer is trivial - install lib32stdc++6
The first line above should read:
sudo apt-get install libc6-i386 lib32z1 lib32stdc++6
In Centos 6.4,when configure Emacs,it shows:
configure: error: The required function `tputs' was not found in any library.
The following libraries were tried (in order):
libtinfo, libncurses, libterminfo, libtermcap, libcurses
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.
How to fix it,what's the problem in it.
sudo yum install ncurses-devel
then ./configure again
Try to install libncurses-dev with
bash
apt-get install libncurses-dev
I'm on a Debian Wheezy derived distribution (CrunchBang)
Trying to install Emacs 24.5.1
Had to install libncurses5-dev, then run ./configure
$ sudo apt-get install ncurses-devel
...
E: Unable to locate package ncurses-devel
$ sudo apt-get install libncurses5-dev