I have problem in installing Shopware on Centos 7
I have follow the documentation of setup in this link :
https://github.com/shopware/shopware/blob/5.3/README.md#installation-via-git
But i face an error when run this command
ant build-unit
[exec] The "https://getcomposer.org/versions" file could not be downloaded: failed to open stream: Connection timed out
[exec] The download failed repeatedly, aborting.
My current Composer version is 1.2.0
is this the problem that i can't continue installation
The best way might be to download Shopware directly from the Shopware Download Section
Just download the latest Version, upload it to your Server, unzip it and install it.
Or just follow the Installation Guide
Related
I am using centOS 8 and trying to install pgAgent in version 3.4.0 on my server.
What I have done so far:
Successfully installed cmake, cpack, ctest, wxWidgets-3.1.3, wxGTK-2.8.12.
Uninstalled wxWidgets-3.1.3 by using 'make uninstall' after applying 'make install'.
Deleted wx-config, wxrc, wxrc-3.1 from /usr/local/bin/.
Installed wxWidgets-2.8.12 by using 'make install', and 'sudo ldconfig' has been applied.
Current status:
pgAgent cannot be installed and returns "No wxWidgets installation could be found."
wxWidgets-2.8.12 cannot be installed with cmake as it is "not in CMakeLists.txt".
"wx-config --version" is not found and the file wx-config is not created when wxWidgets-2.8.12 is installed. (This is also true before the deletion of wx-config, as the old config for version 3.1.3 remains and no 2.9 config file appears during installation.
Desired result: Get pgAgent installed.
PS. Some website suggests me to "completely uninstall" the old wxWidgets and then install the new one, which I don't understand how to achieve that. (The official website said I should uninstall it in the way I install it, which does not modify wx-config.)
I'm trying to install Odoo 8 on Ubuntu 16.04 but i also seem to need to download and install Gdata module for that, according to a toturial found in this website: https://www.getopenerp.com/easy-odoo8-installation/
While typing this command line:
sudo wget http://gdata-python-client.googlecode.com/files/gdata-2.0.17.tar.gz
I keep getting this error message :
--2018-10-30 20:00:23-- http://gdata-python-client.googlecode.com /files/gdata-2.0.17.tar.gz
Resolving gdata-python-client.googlecode.com (gdata-python- client.googlecode.com)... 64.233.166.82, 2a00:1450:400c:c06::52
Connecting to gdata-python-client.googlecode.com (gdata-python- client.googlecode.com)|64.233.166.82|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
018-10-30 20:00:24 ERROR 404: Not Found.
Does anyone have any clue on how to fix this?
This tutorial and Odoo8 both are obsolete. Current version is Odoo 12. Gdata url you are trying to access, no longer exists. However you can install gdata with Python pip.
`pip install gdata` // requires Python 2.5+
Or to upgrade, use:
`pip install -U gdata`
You need to skip rest of the instructions in STEP 8 of tutorial.
I am trying to install Zend Framework 3 in Windows 7. I downloded the Skeleton from Git and run composer install. But getting the error
[UnexpectedValueException] Invalid version string "^1.1.0".
Details:
PHP Version 5.6.3,
XAMPP Version 5.6.3
I'm not sure what command you ran and why you downloaded the skeleton. The preferred way to install the skeleton is with composer:
composer create-project zendframework/skeleton-application path/to/install
More info can be found on https://framework.zend.com/downloads/skeleton-app
I am having trouble upgrading xdebug for MAMP. I was running version 2.2.0 and there was a known issue that I ran into: PhpStorm and Xdebug not breaking in Symfony2 Controller
I tried to upgrade to version 2.2.3 by following the instructions from http://xdebug.org/wizard.php
After downloading and extracting the xdebug tar I ran /Applications/MAMP/bin/php/php5.4.4/bin/phpize
Here is the output:
Configuring for:
PHP Api Version: 20100412
Zend Module Api No: 20100525
Zend Extension Api No: 220100525
I then copied the modules/xdebug.so file into the mamp php5.4.4 extensions dir: `/Applications/MAMP/bin/php/php5.4.4/lib/php/extensions/no-debug-non-zts-20100525/xdebug.
If I run /Applications/MAMP/bin/php/php5.4.4/bin/php -v I get the following:
Xdebug requires Zend Engine API version 220090626.
The Zend Engine API version 220100525 which is installed, is newer.
Contact Derick Rethans at http://xdebug.org/docs/faq#api for a later version of Xdebug.
PHP 5.4.4 (cli) (built: Jul 4 2012 17:28:56)
Copyright (c) 1997-2012 The PHP Group
Zend Engine v2.4.0, Copyright (c) 1998-2012 Zend Technologies
I have restarted MAMP and Apache and tried loading a page with phpinfo() and I do not see Xdebug listed. If I moved the old xdebug.so file back in place the error is removed and phpinfo() show xdebug as enabled
I managed to solve this issue by running
/Applications/MAMP/bin/php/php5.4.4/bin/pecl install xdebug At first I was seeing issues with the Zend API number using pecl. I followed this post: pecl installs for previous php version and set the following:
sudo /Applications/MAMP/bin/php/php5.4.4/bin/pear config-set php_ini /Applications/MAMP/bin/php/php5.4.4/conf/php.ini
sudo /Applications/MAMP/bin/php/php5.4.4/bin/pecl config-set bin_dir /Applications/MAMP/bin/php/php5.4.4/bin/
Not sure if these configs had something to do with it failing before
I have a MAMP server set up on a Mac Pro, I could not get xDebug to work. This was in my logs:
PHP Warning: PHP Startup: xdebug: Unable to initialize module
Module compiled with module API=20160303
PHP compiled with module API=20170718
These options need to match
in Unknown on line 0
This can be fixed by installing the latest xDebug.so. My problem with doing so was that is was writing to the wrong xDebug.so,not the MAMP server:
Build process completed successfully
Installing '/usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so'
ERROR: failed to write /usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so (copy(/usr/lib/php/extensions/no-debug-non-zts-20160303/xdebug.so): failed to open stream: Operation not permitted)
The second line of #Shawn's answer was the solution:
sudo /Applications/MAMP/bin/php/php7.2.7/bin/pecl config-set bin_dir /Applications/MAMP/bin/php/php7.2.7/bin/
I was then able to build the latest xDebug.so to the right directory using pecl install xdebug.
I am trying to install distcc 3.1 on one of the Sun Solaris platform.
After extracting the files to a folder I run configure (script which basically checks the required configuration).
This script throws out the following error
make: Fatal error in reader: Makefile, line 471: Unexpected end of line seen
after this if I run make or make install command I get another error and I am not able to proceed with the installation. Please help me with the correct installation process or guide me on how to resolve this Make issue.
this error occurs when the version of distcc installed is not compatible with your O.S. Install the package again this time for your own OS. Example - I installed distcc 2.13 for solaris 9 from www.sunfreeware.com.
I hope this helps !!
Thanks