I'm trying to install RabbitMQ 3.7.4 on CentOS 6.8. Currently I have installed Erlang 20 following instruction from https://github.com/erlang/otp/blob/maint/HOWTO/INSTALL.md , but when I tried :
sudo yum install https://dl.bintray.com/rabbitmq/all/rabbitmq-server/3.7.4/rabbitmq-server-3.7.4-1.el6.noarch.rpm
it doesn't detect the Erlang 20. Instead it searched for the available Erlang package from my EPEL, which is the R14B, and wont install since it is lower than the minimum Erlang version requirements. How do I fix this and install RabbitMQ?
From the Installation instructions at https://packages.erlang-solutions.com/erlang/
Installation using repository
1. Adding repository entry
To add Erlang Solutions repository (including our public key for verifying signed package) to your system, call the following commands:
wget https://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
Alternatively: adding the repository entry manually
RPM packages are signed. To add Erlang Solutions key, execute command:
rpm --import https://packages.erlang-solutions.com/rpm/erlang_solutions.asc
Add the following lines to some file in "/etc/yum.repos.d/":
[erlang-solutions]
name=CentOS $releasever - $basearch - Erlang Solutions
baseurl=https://packages.erlang-solutions.com/rpm/centos/$releasever/$basearch
gpgcheck=1
gpgkey=https://packages.erlang-solutions.com/rpm/erlang_solutions.asc
enabled=1
2. Adding repository with dependencies
Packages requires some packages that are not present in standard repository. Please ensure that EPEL respository is enabled.
3. Installing Erlang
Call the following command to install the "erlang" package:
sudo yum install erlang
or this command to install the "esl-erlang" package:
sudo yum install esl-erlang
Please refer to the FAQ for the difference between those versions. Your erlang will be kept up to date either way.
Related
I created an offline repo for RHEL 8:
downloaded all needed packages with dnf download
create repodata with createrepo command
I'm able to install most of the packages in offline mode but python3 can't be installed
The error I'm receiving is:
No available modular metadata for modular package 'python36-3.6.8-2.module+el8.1.0+3334+5cb623d7.x86_64', it cannot be installed on the system
Error: No available modular metadata for modular package
What can I do to fix this?
Regards,
It seems this worked for me: https://unix.stackexchange.com/questions/567057/download-rpm-and-all-dependencies-on-rhel-centos-8
There are some packages required like: python3-createrepo_c libmodulemd
And Python module: click
It may be that you need Development Tools:
$ sudo yum groupinstall ‘Development Tools’
See https://developers.redhat.com/rhel8/hw/python
I'm trying to install Visual studio code.
My Raspb. Version is:
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 9.8 (stretch)
Release: 9.8
Codename: stretch
I tried several method (starting to download .deb and using dpkg or install command) but nothing worked.
How can I fix this problem? I really need VSC because my project is growing and Geany messes up.
Downloaded .deb and .tar files from the official site, followed the setup instruction but I got this error
With dpkg (both 32 and 64bit):
"package architecture (amd64) does not match system (armhf)"
"package architecture (i386) does not match system (armhf)"
With sudo install:
sudo apt install ./code_1.33.1-1554971066_amd64.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'code:amd64' instead of './code_1.33.1-1554971066_amd64.deb'
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
code:amd64 : Depends: libnotify4:amd64 but it is not installable
Depends: libnss3:amd64 (>= 2:3.26) but it is not installable
Depends: apt:amd64 but it is not installable
Depends: libxkbfile1:amd64 but it is not installable
Depends: libsecret-1-0:amd64 but it is not installable
Depends: libgtk-3-0:amd64 (>= 3.10.0) but it is not installable
Depends: libxss1:amd64 but it is not installable
E: Unable to correct problems, you have held broken packages.
With repository:
pi#raspberrypi:~/Downloads $ sudo apt-get update
Err:1 http://raspbian.raspberrypi.org/raspbian stretch InRelease
Temporary failure resolving 'raspbian.raspberrypi.org'
Err:2 http://archive.raspberrypi.org/debian stretch InRelease
Temporary failure resolving 'archive.raspberrypi.org'
Err:3 https://packages.microsoft.com/repos/vscode stable InRelease
Could not resolve host: packages.microsoft.com
Reading package lists... Done
W: Failed to fetch http://raspbian.raspberrypi.org/raspbian/dists/stretch/InRelease Temporary failure resolving 'raspbian.raspberrypi.org'
W: Failed to fetch http://archive.raspberrypi.org/debian/dists/stretch/InRelease Temporary failure resolving 'archive.raspberrypi.org'
W: Failed to fetch https://packages.microsoft.com/repos/vscode/dists/stable/InRelease Could not resolve host: packages.microsoft.com
W: Some index files failed to download. They have been ignored, or old ones used instead.
pi#raspberrypi:~/Downloads $ sudo apt-get install code
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package code
I'm getting mad about this problem, I tried older repository but they don't work.
There are Community builds of Visual Studio Code available (for Raspberry Pi and other ARM and Intel systems).
The packages are currently available in DEB and RPM format. You can use the scripts provided here to install the packages and add their repository to your system or install it manually.
Below I summarized the steps:
Open a new terminal. If you need super-user rights (you probably do), then you can enter sudo -s and press return to enter a super-user session. Run the installer for your current distribution:
APT instructions
(including Debian, Raspbian, Ubuntu and Linux Mint)
. <( wget -O - https://code.headmelted.com/installers/apt.sh )
Press the return key. Once the installer has completed, you should have a "Code - OSS" entry in your desktop program list.
Manual installation
If for any reason the script above will not work on your system, or you do not want to add the package source for updates, you can get the latest version of the package for your system below.
Public GPG key
For either APT or YUM installation, you'll want the public GPG key to verify the package, which you can download here.
APT and YUM packages
The latest packages are available directly from the PackageCloud releases page.
The specific package you need is available here.
EDIT:
At this time (29.04.2019) the current release (v. 1.32) appears not to be working for everybody. See: issue#64. Seems that you'll have to go back to v. 1.29, which is reported to be running fine.
You can choose this package and install it manually, or use APT. If you decide to install it via APT, note that you'll have to mark the package on hold as described below.
To prevent code-oss from upgrading (so that you can keep v. 1.29 until the issue is fixed) follow these instructions:
Install v. 1.29 via APT:
apt-get install code-oss=1.29.0-1539702286
Then mark it on hold by running:
apt-mark hold code-oss
Now running apt-get upgrade won't try to bump it up until you run:
apt-mark unhold code-oss
This will allow it to upgrade again as usual.
I am trying to install kafka on on centOS using this page .
https://docs.confluent.io/current/installation/installing_cp/rhel-centos.html
but getting this error
No package confluent-community-2.11 available.
After running this page command
sudo yum clean all && sudo yum install confluent-community-2.11
It seem no rpm is given here: https://packages.confluent.io/rpm/5.1/7
You need both repos added to yum, not just the 5.1/7 (which has some specific additional packages, not the main confluent-community-2.11 package)
I'm trying to install TSung on CentOS 7, but I'm having trouble installing the dependencies.
When I tried to install perl-RRD-Simple.noarch, yum shows no package available. So I downloaded an RPM file and did:
rpm -ivh perl-RRD-Simple-1.43-1.el5.rf.noarch.rpm
But I got an error:
error: Failed dependencies:
perl(RRDs) is needed by perl-RRD-Simple-1.43-1.el5.rf.noarch
How can I install the perl-RRD-Simple package? RRDtool is already installed.
RRD::Simple depends on RRDs.pm, the Perl bindings for RRDtool. RRDs.pm is in the rrdtool-perl package; on CentOS 7, rrdtool-perl is in the base repo, so you can just do:
yum install rrdtool-perl
You'll also need to find a different perl-RRD-Simple RPM, since perl-RRD-Simple-1.43-1.el5.rf.noarch.rpm is for EL5. The only one I can find for EL7 is here.
Alternatively, you can build your own RPM.
On centos 7.3 minimal trying to install shapely or geopandas requires access to https://github.com/libgeos/libgeos libgeos.
Trying to install this via sudo yum install libgeos-dev tells me that this package is not available. It seems that I am lacking a repository. So far I have been unable to find a working one as http://trac.osgeo.org/geos is pointing to https://yum.postgresql.org/repopackages.php#pg96 for the RPM but still after rpm -Uvh https://download.postgresql.org/pub/repos/yum/9.6/redhat/rhel-7-x86_64/pgdg-centos96-9.6-3.noarch.rpm the installation candidate is not found.
It seems that for CentOS this package is called geos-devel and can be found through RPM Fusion.
yum install https://download1.rpmfusion.org/free/el/rpmfusion-free-release-7.noarch.rpm
yum install geos-devel
Also see: https://rpmfusion.org/Configuration