I am trying to install kafka on on centOS using this page .
https://docs.confluent.io/current/installation/installing_cp/rhel-centos.html
but getting this error
No package confluent-community-2.11 available.
After running this page command
sudo yum clean all && sudo yum install confluent-community-2.11
It seem no rpm is given here: https://packages.confluent.io/rpm/5.1/7
You need both repos added to yum, not just the 5.1/7 (which has some specific additional packages, not the main confluent-community-2.11 package)
Related
I'm trying to install RabbitMQ 3.7.4 on CentOS 6.8. Currently I have installed Erlang 20 following instruction from https://github.com/erlang/otp/blob/maint/HOWTO/INSTALL.md , but when I tried :
sudo yum install https://dl.bintray.com/rabbitmq/all/rabbitmq-server/3.7.4/rabbitmq-server-3.7.4-1.el6.noarch.rpm
it doesn't detect the Erlang 20. Instead it searched for the available Erlang package from my EPEL, which is the R14B, and wont install since it is lower than the minimum Erlang version requirements. How do I fix this and install RabbitMQ?
From the Installation instructions at https://packages.erlang-solutions.com/erlang/
Installation using repository
1. Adding repository entry
To add Erlang Solutions repository (including our public key for verifying signed package) to your system, call the following commands:
wget https://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
Alternatively: adding the repository entry manually
RPM packages are signed. To add Erlang Solutions key, execute command:
rpm --import https://packages.erlang-solutions.com/rpm/erlang_solutions.asc
Add the following lines to some file in "/etc/yum.repos.d/":
[erlang-solutions]
name=CentOS $releasever - $basearch - Erlang Solutions
baseurl=https://packages.erlang-solutions.com/rpm/centos/$releasever/$basearch
gpgcheck=1
gpgkey=https://packages.erlang-solutions.com/rpm/erlang_solutions.asc
enabled=1
2. Adding repository with dependencies
Packages requires some packages that are not present in standard repository. Please ensure that EPEL respository is enabled.
3. Installing Erlang
Call the following command to install the "erlang" package:
sudo yum install erlang
or this command to install the "esl-erlang" package:
sudo yum install esl-erlang
Please refer to the FAQ for the difference between those versions. Your erlang will be kept up to date either way.
I have downloaded a package with it's dependency and want to install a package with dependency. Even though i have download in local folder it's checking for online.
sudo yum -y --disablerepo=* localinstall autoconf-2.69-11.el7.noarch.rpm
I am trying above command but failed to load it's dependency that is there in same folder.
Thanks,
Hare
Inside the local directory where you have all the downloaded RPMs, do this:
sudo yum --disablerepo=* localinstall *.rpm
OR
sudo yum --disablerepo=* localinstall foo.rpm bar.rpm baz.rpm
Since you have downloaded all the dependencies to a single directory, you can also use rpm to install those:
sudo rpm -Uvvh *.rpm --test
--test does a dry-run. Remove it to install on disk.
Even if the solution provide by iamauser is very great (and I am using it all the time), I wish to give you an other way to do it.
It exists yum-downloader command which doing basically the same thing for you.
# yumdownloader <package> --resolve
You just have to download it first :
# yum install yum-utils
Overall, I suggest you to read this article from Red Hat company site's which details everything about those two methods :
https://access.redhat.com/solutions/10154
On centos 7.3 minimal trying to install shapely or geopandas requires access to https://github.com/libgeos/libgeos libgeos.
Trying to install this via sudo yum install libgeos-dev tells me that this package is not available. It seems that I am lacking a repository. So far I have been unable to find a working one as http://trac.osgeo.org/geos is pointing to https://yum.postgresql.org/repopackages.php#pg96 for the RPM but still after rpm -Uvh https://download.postgresql.org/pub/repos/yum/9.6/redhat/rhel-7-x86_64/pgdg-centos96-9.6-3.noarch.rpm the installation candidate is not found.
It seems that for CentOS this package is called geos-devel and can be found through RPM Fusion.
yum install https://download1.rpmfusion.org/free/el/rpmfusion-free-release-7.noarch.rpm
yum install geos-devel
Also see: https://rpmfusion.org/Configuration
I install my new rpm package using yum install (my package name) command; yum command installs main rpm package along with dependencies; there is no issue.
If my main package is updated to new and higher version then yum update (my package name) work fine, without any issues.
Please note, I execute createrepo command whenever new rpm is copied into rpm collection folder.
Problem is: If only adependent rpm is upgraded i.e. to new version in rpm collection folder at repo server, How to update only dependent rpms on client machine (RH machine)?
What I tried:
1. sudo yum update (my package name) command always returns (my package name) is already updated but It did not even check dependencies for a new version
I added one more dependent pkg (deppkg) section in repo file like below:
[mainpkg]
name=simplest
baseurl="file:///home/anand/testcode/rpmtest/"
gpgcheck=0
[deppkg]
name=simplest
baseurl="file:///home/anand/testcode/rpmtest/"
gpgcheck=0
Having added one deppkg section, yum update deppkg started working which is obvious. Still, yum update mainpkg command still does not find new dependencies.
I do not want to go by 2nd option as there can be many pkgs and will have to add or delete time to time so it will be difficult in the long run.
Could you please let me know if there are any alternative ways which would be useful to update only dependencies from a remote machine?
Regards,
Anand Choubey
Just "sudo yum upgrade" should pull in the updates. Don't give it any package names.
Edit: If you only want the ones from your repo, you can do "sudo yum upgrade --disablerepo=* --enablerepo=yourreponame"
you can run sudo yum makecache to update repos
and sudo yum update --downloadonly to pull rpm's without installing it
I tried to install the latest release tarball of Mesos on CentOS 6.4 with no luck. It ended up in all sorts of failures in trying to find jvm & jni bindings. Is there any instructions on how to install Mesos on RHEL or CentOS ?
I couldn't find any instructions around so I thought I would troubleshoot all through my way and thought of documenting it here so it can save your time.
First things first, load your CentOS box with essential build tools to get started
$ sudo yum groupinstall "Development tools"
Get Java and python dependencies installed
$ sudo yum install java-1.6.0-openjdk.x86_64 java-1.6.0-openjdk-devel.x86_64 python python-devel libcurl libcurl-devel
Get the latest Mesos tarball
$ wget http://mirror.nus.edu.sg/apache/mesos/0.13.0/mesos-0.13.0.tar.gz
$ tar -xzvf mesos-0.13.0.tar.gz
$ cd mesos-0.13.0
Before you can build Mesos, you need to set correct JAVA binding paths
$ export JAVA_HOME=/usr
$ export JAVA_LDFLAGS="-L/usr/lib/jvm/java-1.6.0/jre/lib/amd64/server -R/usr/lib/jvm/java-1.6.0/jre/lib/amd64/server -ljvm"
$ export JAVA_CPPFLAGS="-I/usr/lib/jvm/java-1.6.0/include -I/usr/lib/jvm/java-1.6.0/include/linux"
$ export LD_LIBRARY_PATH=/usr/lib/jvm/java-1.6.0/jre/lib/amd64/server:$LD_LIBRARY_PATH
Configure and build it
$ ./configure
$ make
After you have built Mesos, it is advisable that you build and run the tests, this will make sure that what you have installed meets all the requirements
$ make check
If the checks are successful, You are just one step away from installing it in your system installation paths
$ make install
To learn how to use Mesos , go here http://mesos.apache.org/gettingstarted/
For those who prefer installing from RPM's, here is a link to a number of different releases for different Linux flavors: http://mesosphere.io/downloads/ For example, for Centos64:
wget http://downloads.mesosphere.io/master/centos/6/mesos_0.14.2_x86_64.rpm
sudo rpm -Uvh mesos_0.14.2_x86_64.rpm
I also had to set my LD_LIBRARY_PATH, though to a slightly different value. Check yours.
Python bindings can also be downloaded from the first link above:
wget http://downloads.mesosphere.io/master/centos/6/mesos_0.14.2_x86_64.egg
sudo easy_install mesos_0.14.2_x86_64.egg