I am creating protractor cucumber project using TypeScript. While trying to run my cucumber test in protractor I am getting below error message. I have installed cucumber globally as well in the root of my project folder. Still getting same issue. :
Below is my bin folder structure. I do not see any 'cucumber' file or folder. However, I do see cucumber-js file. When I copy cucumber.js file from dist folder the error goes away. But that gives some other errors.
bin folder contents:
cucumber-js
run_slave
Because there are issues with cucumber v4.2.1 on windows 7 64bits.
For now please try the following:
Delete the existing cucumber folder from your "../project/node_modules"
Run "npm install cucumber#1.3.3." in "../project/node_modules"
Try executing your scripts now Check if the issue persists!
Related
I am following ROS–Unity Integration tutorial for ROS2. I coppied unity_robotics_demo and unity_robotics_demo_msgs to my src folder from here. When building unity_robotics_demo_msgs gives me an error. I did source install/setup.bash and colcon build. Error:
CMake Error at CMakeLists.txt:7 (find_package):
By not providing "Findrosidl_default_generators.cmake" in CMAKE_MODULE_PATH
this project has asked CMake to find a package configuration file provided
by "rosidl_default_generators", but CMake did not find one.
Could not find a package configuration file provided by
"rosidl_default_generators" with any of the following names:
rosidl_default_generatorsConfig.cmake
rosidl_default_generators-config.cmake
Add the installation prefix of "rosidl_default_generators" to
CMAKE_PREFIX_PATH or set "rosidl_default_generators_DIR" to a directory
containing one of the above files. If "rosidl_default_generators" provides
a separate development package or SDK, be sure it has been installed.
I am not sure how to add the installation prefix. In foxy/share there is rosidl_default_generators:
I've imported a module called "github.com/lib/pq". before I ran my code, I inserted this in the terminal % go get github.com/lib/pq. Then when i tried to run my code, I'm getting an error message in the terminal
'no required module provides package github.com/lib/pq: go.mod file not found in current directory or any parent directory; see 'go help modules'
Running go mod tidy will sync your go.mod and go.sum file with the imports in your code, this will add missing dependencies and remove unnecessary ones. Should solve your issue.
I am getting this error while I try to import the gobblin distribution into my IDE , I have tried both inteliJ and eclipse , not able to find any luck.
Below are the errors which I get when I try to import.
In Eclipse the error is:
*org.gradle.tooling.BuildException: Could not run build action using Gradle distribution 'https://services.gradle.org/distributions/gradle-3.3-bin.zip'.
*
For InteliJ
*Cause: startup failed: build file 'C:\Users\sayyad.ghazi\Desktop\gob\gobblin-master\gobblin-restli\gobblin-throttling-service\gobblin-throttling-service-api\build.gradle': 1: unexpected token: .. # line 1, column 1. ../../api.gradle ^ 1 error*
This is because on Windows, Git can not create symbolic link file on non-admins mode. Symbolic link file is created as text file, containing a symbolic link.
Try the following command in Administrator Mode:
git clone -c core.symlinks=true <URL>
Then check the content of symbolic link file, such as "build.gradle" in your description. It should be the same as the content of "../../api.gradle", not just a symbolic link.
See git-for-windows-wiki-Symbolic-Links for more details.
everything worked fine but I've just tried to run my CUDA programs on Linux Ubuntu 12.10 in NetBeans and I get error:
dist/Debug/GNU-Linux-x86/my_cuda_1: error while loading shared
libraries: libcudart.so.5.0: cannot open shared object file: No such
file or directory
RUN FAILED (exit value 127, total time: 191ms)
the projects can build: compile + link without problems, I can also run it from commandline but if I try run it from NetBeans I get this error.
I was able to run it few minutes ago, what might happened?
I have added file my_lib to ld.so.conf.d containing such text:
/usr/local/cuda-5.0/lib64:/lib
/usr/lib
/usr/lib64
can it be a link issue libcudart.so.5.0 -> licudart.so?
there are two libs in cuda/lib libcudart.so.5.0 (link) and libcudart.so (link) and libcudart.so.5.0.35 (shared lib)
why it complains about .so.5.0? mayve link like:
sudo ln -s /usr/lib/x86_64-linux-gnu/libglut.so.3 /usr/lib/libglut.so
is necessary
it is related to link to shared library I think
root#comp:# echo $LD_LIBRARY_PATH
/usr/lib/nvidia-current:/usr/local/cuda-5.0/lib::/usr/local/cuda-5.0/lib64:/lib
isn't this :: a problem? seems that No because I changed this and still same error. I specify PATHS, I run ldconfig, I put exports in the .bashrc, still nothing.
the reason is that I cannot load these libraries if program is started from NetBeans GUI, however I start NetBeans as root always
add to the Project -> Properties -> Run -> Environment
Name: LD_LIBRARY_PATH
Value:
$LD_LIBRARY_PATH:/usr/lib/nvidia-current:/usr/local/cuda-5.0/lib:/usr/local/cuda-5.0/lib64:/lib
Thank you all. I don't know what happened before as it worked just fine.
I have the following class and unit test in a PHP project in Eclipse:
I know my unit test works as I can run it at the command line:
Now I want to run this test from Eclipse. I set up PHP Unit in Eclipse like this:
However, when I run the PHPUnit tests:
It tells me that it can't include the class file:
/usr/bin/php -c /var/folders/UA/UAv38snBHd0QMgEPMCmM9U+++TM/-Tmp-/zend_debug/session4910937990995915704.tmp -d asp_tags=off /Applications/eclipse/plugins/org.phpsrc.eclipse.pti.tools.phpunit_0.5.0.R20101103000000/php/tools/phpunit.php --log-junit /var/folders/UA/UAv38snBHd0QMgEPMCmM9U+++TM/-Tmp-/pti_phpunit/phpunit.xml /Volumes/data/domains/et/extjslayout/phpunittest/tests
PHP Warning: include_once(../Product.php): failed to open stream: No such file or directory in /Volumes/data/domains/et/extjslayout/phpunittest/tests/ProductTest.php on line 3
PHP Warning: include_once(): Failed opening '../Product.php' for inclusion (include_path='/usr/local/PEAR') in /Volumes/data/domains/et/extjslayout/phpunittest/tests/ProductTest.php on line 3
PHP Fatal error: Class 'Product' not found in /Volumes/data/domains/et/extjslayout/phpunittest/tests/ProductTest.php on line 9
Why would PHPUnit be able to find the class when run from the command line but not when run from Eclipse?
When you start something from the command line, the "current directory" has a well-defined meaning: It's the directory where you started the command.
In Eclipse, what is the "current directory"? It's probably the directory from which you started Eclipse or maybe the folder in which Eclipse is installed.
I haven't used PHP in Eclipse before but for other languages, I can set the current directory in the launch config somewhere. If that doesn't work, define a variable which points to your project and then use absolute paths (using that variable as a starting point).
Have same problem. Found only solution by creating tests with internal PHPUnit wizard like at this screenshot:
Source: HowTo create a Test Case Class from a PHP Class
But following investigate show that your test case file should contain reference to tested code for example like this: require_once 'C:\Apache2\htdocs\jobeet\src\Ibw\JobeetBundle\Utils\Jobeet.php';
Other experiments with plugin config not bringing luck. So in my opinion PHPUnit from PHP Tools not well developed plugin. Consider using MakeGood plugin as better alternative.