When i visit https://extensions.gnome.org/
I have the latest Centos7 build and updated, i installed the addon ( both on firefox and chrome) and i still get this message..
In the documentation where it explains how to cmake the native connector and install it - when i tried to build it it gave me a error log:
The system is: Linux - 3.10.0-862.el7.x86_64 - x86_64
I don't know what else to do...
I also run yum install gnome-shell-extension*, yum install gnome-shell-extension, and yum install gnome-shell
Please help, i am new to Linux
Related
i have a problem to install numactl-libs (or libnuma.so.1) on a ubi7/ubi:latest Docker image to run the db2 installation.
I have built a Docker image for db2 and wanted to test whether the DB2 installation runs successfully.
However, I get the following error message:
Requirement not matched for DB2 database "Server" . Version: "11.1.4.6".
Summary of prerequisites that are not met on the current system:
DBT3609E The db2prereqcheck utility could not find the library file libnuma.so.1.
The image has ubi7/ubi:latest as base image and the following libraries are also installed as follows:
RUN yum install -y libaio numactl-libs libpam.so.0 binutils gcc gcc-c++ ksh numactl && yum clean all
All libraries are successfully installed except numactl-libs (or libnuma.so.1?).
Note: a manual installation of numactl-libs worked without problems and thus the DB2 installation was successful:
ADD http://mirror.centos.org/centos/7/os/x86_64/Packages/numactl-libs-2.0.12-5.el7.x86_64.rpm numactl.rpm
RUN rpm -i numactl.rpm
However, I would like the installation of numactl-libs to be done automatically with e.g. the command yum install -y numactl-libs or another equivalent command.
Unfortunately, an attempt with the command yum install -y libnuma.so.1 or yum install -y libnuma.so.* did not change anything and the same error message was displayed.
Can you please help me? I would be very grateful
Note: in my case a 64-bit version is used.
Update:
Unfortunately even trying to install libnuma-dev and libnuma1 has not changed anything and the error message is still the same .
The output of yum provides libnuma.so.1 is:
Loaded plugins: ovl, product-id, search-disabled-repos,
subscription-manager This system is not registered with an
entitlement server. You can use subscription-manager to register.
No matches found
It seems that the problem is that numactl-libs cannot be installed:
The output of yum install numactl-libs is:
Loaded plugins: ovl, product-id, search-disabled-repos, subscription-manager.
This system is not registered with an entitlement server. You can use subscription-manager to register.
No package numactl-libs available.
Solution:
The problem was fixed and numactl-libs could finally be installed:
After I created a Red Hat user account and registered and subscribed to a system for the Red Hat Customer Portal with Red Hat Subscription Manager, numactl-libs installed without any problems.
To register and subscribe to a system for the Red Hat Customer Portal with Red Hat Subscription Manager.
See the following link: (https://access.redhat.com/solutions/253273)
I added the following line in my Dockerfile before the command yum install numactl-libs:
subscription-manager register --username=[USER_NAME] --password=[PASSWORD] --auto-attach
After these steps the DB2 installation ran without problems.
Thank you very much for your tips and help!
I created an offline repo for RHEL 8:
downloaded all needed packages with dnf download
create repodata with createrepo command
I'm able to install most of the packages in offline mode but python3 can't be installed
The error I'm receiving is:
No available modular metadata for modular package 'python36-3.6.8-2.module+el8.1.0+3334+5cb623d7.x86_64', it cannot be installed on the system
Error: No available modular metadata for modular package
What can I do to fix this?
Regards,
It seems this worked for me: https://unix.stackexchange.com/questions/567057/download-rpm-and-all-dependencies-on-rhel-centos-8
There are some packages required like: python3-createrepo_c libmodulemd
And Python module: click
It may be that you need Development Tools:
$ sudo yum groupinstall ‘Development Tools’
See https://developers.redhat.com/rhel8/hw/python
I'm try to understand how the nodejs plugin i'm using to create snap node.js app handle the Node.js environment ? Example in this application :
parts:
webserver:
source: .
plugin: nodejs
nodejs-version: "12.13.1"
nodejs-package-manager: "yarn"
nodejs-yarn-version: "v1.21.1"
I'm defining to use Node.js v12.13.1 and Yarn v1.21.1 lunching the snapcraft commands:
snapcraft clean
snapcraft --debug
snap install my-snap-file.snap --dangerous
Now i'm able to run the command/service on my machine (amd64 Ubuntu 16.04 LTS) with Node.js v12.2.0 installed but i cant find the node.js env not in multipass instance not in another machine with installed Ubuntu Core 18, i mean i can't run command as node --version and so on and even the snap app doesn't work neither command neither service.
Other problem i've discovered digging in the Ubuntu Core 18 env installed on RaspBerry Pi3 is : When i've installed my snap with nodejs app in the folder /snap//bin i cannot run the ./node exec ! i get the error :
./node: 1: ./node: Syntax error: "(" unexpected
My questions are :
Why i get the ./node error ?
my-snap-file.snap bundle the Node.js v12.3.1 inside the mysnap ?
how i can test the node.js is working with the right version in multipass and other machine where i've installed only the snap bundling node.js ?
THks
Thanks to forum.snapcraft.io i've solved the issue ... i'm posting here to help people to solve these kind of issues too. This error is due to the snap that is NOT build on the actual target architecture you want to run it on. Make sure you build eg. armhf (raspberry pi3) actually on an armhf architecture device.
architectures:
- build-on: amd64
run-on: [amd64, armhf]
here you tell snapcraft that building on amd64 produces binary snaps that can run on amd64 and armhf … which is indeed not true (since building on amd64 will pull in only amd64 binaries). i’d drop that statement completely and make sure to build the armhf version on an armhf device (or on build.snapcraft.io). (Credits Ogra)
Read the Link about architectures in snapcraft.yaml
https://forum.snapcraft.io/t/architectures/4972
I'm trying to install the rackspace plugin for vagrant (1.5.1):
vagrant plugin install vagrant-rackspace
But it complains
Bundler, the underlying system Vagrant uses to install plugins,
reported an error. The error is shown below. These errors are usually
caused by misconfigured plugin installations or transient network
issues. The error from Bundler is:
An error occurred while installing nokogiri (1.6.1), and Bundler
cannot continue. Make sure that gem install nokogiri -v '1.6.1'
succeeds before bundling.
However gem install nokogiri -v '1.6.1' and /Applications/Vagrant/embedded/bin/gem install nokogiri -v '1.6.1' both work.
I've looked at a bunch of SO threads and blog posts. Things I've tried that have not worked
Running xcode-select --install
Installing full xcode
brew install gcc-4.2
Remove rvm and rvm version of ruby
Install nokogiri w/ built-in (mac) ruby and vagrant-embedded ruby
Despite the fact that nokogiri installs fine (#5 above) without sudo on both counts, vagrant plugin install vagrant-rackspace still fails...
So, in summary, I can install the nokogiri plugin, however I cannot install the vagrant rackspace plugin, can you help me get the plugin installed?
Related threads
Error to install Nokogiri on OSX 10.9 Maverick?
nokogiri - ERROR: Failed to build gem native extension
Full output of vagrant plugin install vagrant-rackspace --debug
I'm on OSX Mavericks and this worked for me:
Set as environment property:
NOKOGIRI_USE_SYSTEM_LIBRARIES=1
Then install as usual:
vagrant plugin install vagrant-rackspace
Vagrant ships with embedded Ruby and isolated gem environment. So installing gems manually to your "normal" gem environment won't help.
The first issue is that you should never use sudo to run any vagrant command. If possible, please remove ~/.vagrant.d/ or at least chown it recursively back to your own user. You could also try upgrading Vagrant to v1.5.1.
Then please gist/pastebin the output of vagrant plugin install vagrant-rackspace --debug and ~/.vagrant.d/gems/gems/nokogiri-1.6.1/ext/nokogiri/mkmf.log.
The posted solutions didn't work for me. Instead I needed to specify the libxml2, libxslt and libiconv that I installed with homebrew (Do this first).
I installed the gem manually with the embedded ruby with the following [very concise] command line:
/Applications/Vagrant/embedded/bin/gem install \ # select the embedded ruby
--install-dir ~/.vagrant.d/gems \ # install to the vagrant dir
nokogiri -v '1.6.2.1' -- \ # pass options to nokogiri install
--with-xml2-include=/usr/local/Cellar/libxml2/2.7.8/include/libxml2 \
--with-xml2-lib=/usr/local/Cellar/libxml2/2.7.8/lib \
--with-xslt-dir=/usr/local/Cellar/libxslt/1.1.26 \
--with-iconv-include=/usr/local/Cellar/libiconv/1.13.1/include \
--with-iconv-lib=/usr/local/Cellar/libiconv/1.13.1/lib
This worked for me on Mavericks and Vagrant 1.6.1:
CC=/usr/bin/gcc vagrant plugin install vagrant-rackspace
I tried NOKOGIRI_USE_SYSTEM_LIBRARIES=1 but got an error saying that system libxml2 is too old.
Warning: This is a super-hacky solution, though it's hard to call it that.
Yesterday I installed Vagrant on another OSX Mavericks box. Like many other posts I read on SO "all I had to do" was run xcode-select --install and bingo vagrant plugin install vagrant-rackspace worked like a charm.
Today I was mired down in the Bundler code again when it dawned on me that since this is an isolated ruby environment why not nuke my ~/.vagrant.d directory and copy the same directory from the successful build on the other box...
The result? A working vagrant rackspace on my laptop! I'm not sure I'll ever figure out what was really wrong, but if anyone wants a shot at the 100 point bounty, I'm still open to suggestions!
In my case the nokogiri folders and their files located in ~/vagrant.d/gems/gems had wrong rights (user/group).
After changing them to username:staff (username being your console user name), it works like a charm.
Similarly with my case, I have an issue while installing vagrant-omnibus plugin for Vagrant 1.6.3 on OSX Mavericks 10.9.4 and ruby 2.0.0p247 rbenv.
I tried setting the env NOKOGIRI_USE_SYSTEM_LIBRARIES to 1 or true, then update+install but the same error still there.
I found that there is a suggestion in https://github.com/mitchellh/vagrant/issues/3769 to use the specify the baked in nokogiri version and this works for me. So, I also wrote a quick noted for myself to refer this unfortunates issue.
If Nate Murray's solution doesn't work, I found upgrading to a Vagrant version > 1.6.4 fixed the issue (as noted in this Github issue: https://github.com/mitchellh/vagrant/issues/3769)
in my case while trying to install vagrant-parallels, i had to check the Command line tools folder had an error in the naming for some reason. Fixing that allowed nokigiri to work well
I'm working on Michael Hartl's ruby on rails tutorial http://ruby.railstutorial.org/ruby-on-rails-tutorial-book#sec-development_tools.
I installed Git, updated my OS to 10.8.2 and downloaded XCode 4.5.2.
when I type in
rvm install 1.9.3
this long thing comes up...
Ruby (and needed base gems) for your selection will be installed shortly.
Before it happens, please read and execute the instructions below.
Please use a separate terminal to execute any additional commands.
Notes for Mac OS X 10.8.2, Xcode 4.5.2.
For JRuby: Install the JDK. See http://developer.apple.com/java/download/ # Current Java version "1.6.0_26"
For IronRuby: Install Mono >= 2.6
For Ruby 1.9.3: Install libksba # If using Homebrew, 'brew install libksba'
For Opal: Install Nodejs with NPM. See http://nodejs.org/download/
To use an RVM installed Ruby as default, instead of the system ruby:
rvm install 1.8.7 # installs patch 357: closest supported version
rvm system ; rvm gemset export system.gems ; rvm 1.8.7 ; rvm gemset import system.gems # migrate your gems
rvm alias create default 1.8.7
And reopen your terminal windows.
Xcode and gcc:
Right now Ruby requires gcc to compile, but Xcode 4.2 and later no longer ship with gcc. Instead they ship with llvm-gcc (to which gcc is a symlink) and clang, neither of which are supported for building Ruby. Xcode 4.1 was the last version to ship gcc, which was /usr/bin/gcc-4.2.
Xcode 4.1 and earlier:
- Ruby will build fine.
Xcode 4.2 and later (including Command Line Tools for Xcode):
- If you have gcc-4.2 (and friends) from an earlier Xcode version, Ruby will build fine.
- If you don't have gcc-4.2, you have two options to get it:
* Install apple-gcc42 from Homebrew
* Install osx-gcc-installer
Homebrew:
If you are using Homebrew, you can install the apple-gcc42 and required libraries from homebrew/dupes:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
rvm pkg install openssl
Xcode 4.2+ install or/and Command Line Tools for Xcode is required to provide make and other tools.
osx-gcc-installer:
If you don't use Homebrew, you can download and install osx-gcc-installer: https://github.com/kennethreitz/osx-gcc-installer.
Warning: Installing osx-gcc-installer on top of a recent Xcode is known to cause problems, so you must uninstall Xcode before installing osx-gcc-installer. Afterwards you may install Xcode 4.2+ or Command Line Tools for Xcode if you desire.
** NOTE: Currently, Node.js is having issues building with osx-gcc-installer. The only fix is to install Xcode over osx-gcc-installer.
Press 'q' to continue.
~
(END)
Originally I had to get homebrew and
brew install libksba
but I did that already and it works. That leads to "Xcode and gcc:" and everything below it.
So, I have homebrew, and the following three commands work:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
But when I try
rvm pkg install openssl
this is what happens
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
And this is what happens when I try what it says...
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm reinstall all --force
Adam-Zerners-MacBook-Pro:~ adamzerner$
some other information...
I don't see a .rvm folder under adamzerner, so I can't read what it tells me to (not that I would understand what I'd be reading anyway).
It seems that I have 1.8.7 installed:
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
So... to summarize... when I try to run
rvm install 1.9.3
I get the gcc/Xcode problem. To fix that it says to download apple-gcc42 from Homebrew. When I do that, I get a problem after doing
rvm pkg install openssl
The problem being that I need to reinstall all rubies. When I do that:
rvm reinstall all --force
it seems that nothing happens.
Thanks in advance to anyone willing to help me with this problem!
EDIT: I forgot to say this before. For the "long thing" up above, when I press q to continue, this is what happens...
Searching for binary rubies, this might take some time.
https://rvm.io/binaries/osx/10.8/x86_64/ruby-1.9.3-p327.tar.bz2 - #configure
ruby-1.9.3-p327 - #download
ruby-1.9.3-p327 - #extract
ruby-1.9.3-p327 - #validate
Libraries missing for ruby-1.9.3-p327: env. Refer to your system manual for installing libraries
Mounting remote ruby failed, trying to compile.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327 (already extracted)
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
EDIT: What happens when I follow the github link OliverAtkinson posted
Last login: Wed Dec 26 15:55:12 on ttys000
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew update
Updated Homebrew from 751a0d6e to c67c126c.
==> New Formulae
ume
==> Updated Formulae
akka global markdown ruby slrn
basex gnuplot mu ruby-build ttytter
casperjs gradle qt shiboken vice
cassandra groonga qt5 shocco wine
discount jenkins rakudo-star signing-party xvid
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew tap homebrew/dupes
Error: Already tapped!
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
Error: autoconf-2.69 already installed
Error: automake-1.12.6 already installed
Error: apple-gcc42-4.2.1-5666.3 already installed
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew remove autoconf automake apple-gcc42
Uninstalling /usr/local/Cellar/autoconf/2.69...
Uninstalling /usr/local/Cellar/automake/1.12.6...
Uninstalling /usr/local/Cellar/apple-gcc42/4.2.1-5666.3...
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
==> Downloading http://ftpmirror.gnu.org/autoconf/autoconf-2.69.tar.gz
Already downloaded: /Library/Caches/Homebrew/autoconf-2.69.tar.gz
==> Patching
patching file bin/autoreconf.in
==> ./configure --prefix=/usr/local/Cellar/autoconf/2.69
==> make install
/usr/local/Cellar/autoconf/2.69: 69 files, 2.0M, built in 13 seconds
==> Downloading http://ftpmirror.gnu.org/automake/automake-1.12.6.tar.gz
Already downloaded: /Library/Caches/Homebrew/automake-1.12.6.tar.gz
==> ./configure --prefix=/usr/local/Cellar/automake/1.12.6
==> make install
/usr/local/Cellar/automake/1.12.6: 130 files, 2.1M, built in 16 seconds
==> Downloading http://r.research.att.com/tools/gcc-42-5666.3-darwin11.pkg
Already downloaded: /Library/Caches/Homebrew/apple-gcc42-4.2.1-5666.3.pkg
==> Caveats
NOTE:
This formula provides components that were removed from XCode in the 4.2
release. There is no reason to install this formula if you are using a
version of XCode prior to 4.2.
This formula contains compilers built from Apple's GCC sources, build
5666.3, available from:
http://opensource.apple.com/tarballs/gcc
All compilers have a `-4.2` suffix. A GFortran compiler is also included.
==> Summary
/usr/local/Cellar/apple-gcc42/4.2.1-5666.3: 104 files, 75M, built in 5 seconds
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm pkg install openssl
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
Adam-Zerners-MacBook-Pro:~ adamzerner$ CC=/usr/local/bin/gcc-4.2 rvm reinstall 1.9.3 --patch falcon --force-autoconf -j 3
Removing /Users/adamzerner/.rvm/src/ruby-1.9.3-p327...
/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 has already been removed.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make -j3', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracting ruby-1.9.3-p327 to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
Applying patch /Users/adamzerner/.rvm/patches/ruby/1.9.3/p327/falcon.diff
ruby-1.9.3-p327 - #autoreconf-f
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
Adam-Zerners-MacBook-Pro:~ adamzerner$
I've successfully downloaded Ruby 1.9.3 now!
I think the problem was that I hadn't downloaded Command Line Tools from XCode. See http://robots.thoughtbot.com/post/27985816073/the-hitchhikers-guide-to-riding-a-mountain-lion
note that for whoami, it's using the backtick key, which is right above the tab key. It is NOT using quotes.
After I downloaded Command Line Tools, I then typed in rvm install 1.9.3. I got the same "long thing" as before, but at that point I had everything I needed, so I just pressed q to continue, and ruby 1.9.3 was successfully installed!
note: although it was successfully installed, when I typed ruby -v, it still said it was 1.8.7 even though it wasn't. However, after closing and reopening the terminal, it then said that the version was indeed 1.9.3.