I have dates and times in number format of YYYYMMDDHHMMSS. As a group by for a sum, I want to have the ability to group by:
YYYYMM
YYYYMMDD
YYYYMMDDHH
I have previously used this below, but it converts it into a string, which isn't great:
"sum_by_date": { $substrBytes: [ "$_id.transaction_date", 0, 7
] }
What I want to achieve from 20181217134218 for by month is either:
201812 or 20181200000000 and kept as a number format.
Thanks, Matt
Use integer division to truncate the number. In Ruby:
(20181217134218 / 100000000) * 100000000 # = 20181200000000
Related
I have column with cell format date or time (DD.MM.YYYY HH:MM:SS) and values like
03.12.2013 14:01:49
04.12.2013 10:19:27
04.12.2013 12:44:56
04.12.2013 14:20:12
04.12.2013 18:30:21
I need those values converted to unix epoch (seconds since 1970). Somehow it feels like the values are not recognized as dates, but rather as strings. I tried different formats, had little luck with dates without time.
Operations performed on date data should be automatic provided that the cells are formatted as as a user defined DD.MM.YYYY HH:MM:SS in the 'Format' > 'Cells' > 'Numbers' tab.
If you're using the standard settings, LibreOffice Calc uses 12/30/1899 as it's default date. So the first step is getting the number of days between 12/30/1899 and 1/1/1970:
=(DATE(1970,1,1) - DATE(1899,12,30)) = 25569
Number of seconds in a day:
=(60 * 60 * 24) = 86400
If, for example, in cell A2 you have the date 03.12.2013 14:01:49. I subtract the difference between Calc's default date and the Unix Epoch we just calculated, and multiply it by the number of seconds in a day:
=(A2 - 25569) * 86400
The result is a value of 1363096909 which is the Epoch time in seconds. If you need it in milliseconds, multiply the equation by 1000.
If it's something you use a lot, you can create a custom function that does this. Go to Tools > Macros > Edit Macros, and type out the following into whichever module comes up:
REM ***** BASIC *****
Function EPOCH(date_cell)
EPOCH = (date_cell - 25569)*86400
End Function
Close the macro IDE, and now you can use your EPOCH() like any other function!
This formula worked for me, where the others above did not:
= DATE( 1970, 1, 1 ) + ( A1 / 86400 )
Can someone please help format this number: $100000 to $100 000,00. (in words: Hundred Thousand dollars) or if million it must format $100000 to $1 000 000,00
I only know of the standard .NET decimal.ToString( "N2" ) e.g.
decimal number = 1000000d;
string formatedNumber = number.ToString( "N2" ); // This will give you 1,00,000.00
Is there a standard .NET format I can re-use or will I have to create my own?
decimal number = 1000000;
Console.WriteLine(number.ToString("C"), System.Globalization.CultureInfo.CreateSpecificCulture("en-US")); // 1 000.000,00
'C' stands for currency, so yes, there is a standard format for it.
My time comes back from a database query as following:
kdbstrbegtime =
09:15:00
kdbstrendtime =
15:00:00
or rather this is what it looks like in the command window.
I want to create a matrix with the number of rows equal to the number of seconds between the two timestamps. Are there time funcitons that make this easily possible?
Use datenum to convert both timestamps into serial numbers, and then subtract them to get the amount of seconds:
secs = fix((datenum(kdbstrendtime) - datenum(kdbstrbegtime)) * 86400)
Since the serial number is measured in days, the result should be multiplied by 86400 ( the number of seconds in one day). Then you can create a matrix with the number of rows equal to secs, e.g:
A = zeros(secs, 1)
I chose the number of columns to be 1, but this can be modified, of course.
First you have to convert kdbstrendtime and kdbstrbegtime to char by datestr command, then:
time = datenum(kdbstrendtime )-datenum(kdbstrbegtime )
t = datestr(time,'HH:MM:SS')
I simply want to generate a series of dates 1 year apart from today.
I tried this
CurveLength=30;
t=zeros(CurveLength);
t(1)=datestr(today);
x=2:CurveLength-1;
t=addtodate(t(1),x,'year');
I am getting two errors so far?
??? In an assignment A(I) = B, the number of elements in B and
Which I am guessing is related to the fact that the date is a string, but when I modified the string to be the same length as the date dd-mmm-yyyy i.e. 11 letters I still get the same error.
Lsstly I get the error
??? Error using ==> addtodate at 45
Quantity must be a numeric scalar.
Which seems to suggest that the function can't be vectorised? If this is true is there anyway to tell in advance which functions can be vectorised and which can not?
To add n years to a date x, you do this:
y = addtodate(x, n, 'year');
However, addtodate requires the following:
x must be a scalar number, not a string.
n must be a scalar number, not a vector.
Hence the errors you get.
I suggest you use a loop to do this:
CurveLength = 30;
t = zeros(CurveLength, 1);
t(1) = today; % # Whatever today equals to...
for ii = 2:CurveLength
t(ii) = addtodate(t(1), ii - 1, 'year');
end
Now that you have all your date values, you can convert it to strings with:
datestr(t);
And here's a neat one-liner using arrayfun;
datestr(arrayfun(#(n)addtodate(today, n, 'year'), 0:CurveLength))
If you're sequence has a constant known start, you can use datenum in the following way:
t = datenum( startYear:endYear, 1, 1)
This works fine also with months, days, hours etc. as long as the sequence doesn't run into negative numbers (like 1:-1:-10). Then months and days behave in a non-standard way.
Here a solution without a loop (possibly faster):
CurveLength=30;
t=datevec(repmat(now(),CurveLength,1));
x=[0:CurveLength-1]';
t(:,1)=t(:,1)+x;
t=datestr(t)
datevec splits the date into six columns [year, month, day, hour, min, sec]. So if you want to change e.g. the year you can just add or subtract from it.
If you want to change the month just add to t(:,2). You can even add numbers > 12 to the month and it will increase the year and month correctly if you transfer it back to a datenum or datestr.
I have a dataset for which I have extracted the date at which an event occurred. The date is in the format of MMDDYY although MatLab does not show leading zeros so often it's MDDYY.
Is there a method to find the mean or median (I could use either) date? median works fine when there is an odd number of days but for even numbers I believe it is averaging the two middle ones which doesn't produce sensible values. I've been trying to convert the dates to a MatLab format with regexp and put it back together but I haven't gotten it to work. Thanks
dates=[32381 41081 40581 32381 32981 41081 40981 40581];
You can use datenum to convert dates to a serial date number (1 at 01/01/0000, 2 at 02/01/0000, 367 at 01/01/0001, etc.):
strDate='27112011';
numDate = datenum(strDate,'ddmmyyyy')
Any arithmetic operation can then be performed on these date numbers, like taking a mean or median:
mean(numDates)
median(numDates)
The only problem here, is that you don't have your dates in a string type, but as numbers. Luckily datenum also accepts numeric input, but you'll have to give the day, month and year separated in a vector:
numDate = datenum([year month day])
or as rows in a matrix if you have multiple timestamps.
So for your specified example data:
dates=[32381 41081 40581 32381 32981 41081 40981 40581];
years = mod(dates,100);
dates = (dates-years)./100;
days = mod(dates,100);
months = (dates-days)./100;
years = years + 1900; % set the years to the 20th century
numDates = datenum([years(:) months(:) days(:)]);
fprintf('The mean date is %s\n', datestr(mean(numDates)));
fprintf('The median date is %s\n', datestr(median(numDates)));
In this example I converted the resulting mean and median back to a readable date format using datestr, which takes the serial date number as input.
Try this:
dates=[32381 41081 40581 32381 32981 41081 40981 40581];
d=zeros(1,length(dates));
for i=1:length(dates)
d(i)=datenum(num2str(dates(i)),'ddmmyy');
end
m=mean(d);
m_str=datestr(m,'dd.mm.yy')
I hope this info to be useful, regards
Store the dates as YYMMDD, rather than as MMDDYY. This has the useful side effect that the numeric order of the dates is also the chronological order.
Here is the pseudo-code for a function that you could write.
foreach date:
year = date % 100
date = (date - year) / 100
day = date % 100
date = (date - day) / 100
month = date
newdate = year * 100 * 100 + month * 100 + day
end for
Once you have the dates in YYMMDD format, then find the median (numerically), and this is also the median chronologically.
You see above how to present dates as numbers.
I will add no your issue of finding median of the list. The default matlab median function will average the two middle values when there are an even number of values.
But you can do it yourself! Try this:
dates; % is your array of dates in numeric form
sdates = sort(dates);
mediandate = sdates(round((length(sdates)+1)/2));