Related
So I am trying to run a perl script on my Centos machine. I have tried on Centos 5,6,7 with no success. Every time I run the script I get this:
Can't locate Net/SSH2.pm in #INC (#INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .)
I have installed libssh2
Package libssh2-1.4.3-12.el7.x86_64 already installed and latest version
I have tried using cpan but no matter what I do it doesn't seem to work.
I just don't understand why perl isn't finding the module... Am I missing something?
If somebody could guide me to actually installing the SSH2 module because I have looked everywhere and nothing seems to work.
Thanks in advance.
UPDATE:
When I try to install via cpan:
cpan[1]> install Net::SSH2
Reading '/root/.cpan/Metadata'
Reading '/root/.cpan/sources/authors/01mailrc.txt.gz'
........................................................................DONE
Reading '/root/.cpan/sources/modules/02packages.details.txt.gz'
Database was generated on Fri, 04 Jan 2019 22:17:03 GMT
HTTP::Date not available
.............
New CPAN.pm version (v2.22) available.
[Currently running version is v1.9800]
You might want to try
install CPAN
reload cpan
to both upgrade CPAN.pm and run the new version without leaving
the current session.
........................................Killed
Still getting the same error...
libssh is the C library for SSH. Net::SSH2 is a Perl module. They are different piece of software (although Net::SSH2 probably depends on libssh).
You need to install Net::SSH2.
See What's the easiest way to install a missing Perl module?
As Quentin mentioned in his answer, libssh2 is the C library for SSH, whereas Net::SSH2 is a Perl module. Since Net::SSH2 will be installed from source (which is what the cpan command does in the background), you will need to ensure that a few prerequisites are installed:
sudo yum install libssh2 libssh2-devel gcc
The libssh2 package was added to this list for completeness. The development package for libssh2 (libssh2-devel) as well as gcc (a C compiler) are required, since the process of installing Net::SSH2 from source requires a library to be built so that Net::SSH2 can talk to libssh2.
When Perl modules are installed from source, the module's test suite is run by default to check that everything is ok before actually running the install step. Hence, you will need to ensure that perl-Test-Simple is installed, since Net::SSH2 uses this to run its tests:
sudo yum install perl-Test-Simple
I personally find it much easier to install Perl modules via cpanm than cpan, thus I recommend installing it (it's available as a yum package):
sudo yum install perl-App-cpanminus
Now the installation of Net::SSH2 should be as simple as:
cpanm Net::SSH2
If you want to install the module system-wide, then you will need to prefix the cpanm call with sudo:
sudo cpanm Net::SSH2
I get this error:
Can't locate Foo.pm in #INC
Is there an easier way to install it than downloading, untarring, making, etc?
On Unix:
usually you start cpan in your shell:
$ cpan
and type
install Chocolate::Belgian
or in short form:
cpan Chocolate::Belgian
On Windows:
If you're using ActivePerl on Windows, the PPM (Perl Package Manager) has much of the same functionality as CPAN.pm.
Example:
$ ppm
ppm> search net-smtp
ppm> install Net-SMTP-Multipart
see How do I install Perl modules? in the CPAN FAQ
Many distributions ship a lot of perl modules as packages.
Debian/Ubuntu: apt-cache search 'perl$'
Arch Linux: pacman -Ss '^perl-'
Gentoo: category dev-perl
You should always prefer them as you benefit from automatic (security) updates and the ease of removal. This can be pretty tricky with the cpan tool itself.
For Gentoo there's a nice tool called g-cpan which builds/installs the module from CPAN and creates a Gentoo package (ebuild) for you.
Try App::cpanminus:
# cpanm Chocolate::Belgian
It's great for just getting stuff installed. It provides none of the more complex functionality of CPAN or CPANPLUS, so it's easy to use, provided you know which module you want to install. If you haven't already got cpanminus, just type:
# cpan App::cpanminus
to install it.
It is also possible to install it without using cpan at all. The basic bootstrap procedure is,
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
For more information go to the App::cpanminus page and look at the section on installation.
I note some folks suggesting one run cpan under sudo. That used to be necessary to install into the system directory, but modern versions of the CPAN shell allow you to configure it to use sudo just for installing. This is much safer, since it means that tests don't run as root.
If you have an old CPAN shell, simply install the new cpan ("install CPAN") and when you reload the shell, it should prompt you to configure these new directives.
Nowadays, when I'm on a system with an old CPAN, the first thing I do is update the shell and set it up to do this so I can do most of my cpan work as a normal user.
Also, I'd strongly suggest that Windows users investigate strawberry Perl. This is a version of Perl that comes packaged with a pre-configured CPAN shell as well as a compiler. It also includes some hard-to-compile Perl modules with their external C library dependencies, notably XML::Parser. This means that you can do the same thing as every other Perl user when it comes to installing modules, and things tend to "just work" a lot more often.
If you're on Ubuntu and you want to install the pre-packaged perl module (for example, geo::ipfree) try this:
$ apt-cache search perl geo::ipfree
libgeo-ipfree-perl - A look up country of ip address Perl module
$ sudo apt-get install libgeo-ipfree-perl
A couple of people mentioned the cpan utility, but it's more than just starting a shell. Just give it the modules that you want to install and let it do it's work.
$prompt> cpan Foo::Bar
If you don't give it any arguments it starts the CPAN.pm shell. This works on Unix, Mac, and should be just fine on Windows (especially Strawberry Perl).
There are several other things that you can do with the cpan tool as well. Here's a summary of the current features (which might be newer than the one that comes with CPAN.pm and perl):
-a
Creates the CPAN.pm autobundle with CPAN::Shell->autobundle.
-A module [ module ... ]
Shows the primary maintainers for the specified modules
-C module [ module ... ]
Show the Changes files for the specified modules
-D module [ module ... ]
Show the module details. This prints one line for each out-of-date module (meaning,
modules locally installed but have newer versions on CPAN). Each line has three columns:
module name, local version, and CPAN version.
-L author [ author ... ]
List the modules by the specified authors.
-h
Prints a help message.
-O
Show the out-of-date modules.
-r
Recompiles dynamically loaded modules with CPAN::Shell->recompile.
-v
Print the script version and CPAN.pm version.
sudo perl -MCPAN -e 'install Foo'
Also see Yes, even you can use CPAN. It shows how you can use CPAN without having root or sudo access.
Otto made a good suggestion. This works for Debian too, as well as any other Debian derivative. The missing piece is what to do when apt-cache search doesn't find something.
$ sudo apt-get install dh-make-perl build-essential apt-file
$ sudo apt-file update
Then whenever you have a random module you wish to install:
$ cd ~/some/path
$ dh-make-perl --build --cpan Some::Random::Module
$ sudo dpkg -i libsome-random-module-perl-0.01-1_i386.deb
This will give you a deb package that you can install to get Some::Random::Module. One of the big benefits here is man pages and sample scripts in addition to the module itself will be placed in your distro's location of choice. If the distro ever comes out with an official package for a newer version of Some::Random::Module, it will automatically be installed when you apt-get upgrade.
Already answered and accepted answer - but anyway:
IMHO the easiest way installing CPAN modules (on unix like systems, and have no idea about the wondows) is:
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
The above is installing the "zero configuration CPAN modules installer" called cpanm. (Can take several minutes to install - don't break the process)
and after - simply:
cpanm Foo
cpanm Module::One
cpanm Another::Module
Many times it does happen that cpan install command fails with the message like
"make test had returned bad status, won't install without force"
In that case following is the way to install the module:
perl -MCPAN -e "CPAN::Shell->force(qw(install Foo::Bar));"
Lots of recommendation for CPAN.pm, which is great, but if you're using Perl 5.10 then you've also got access to CPANPLUS.pm which is like CPAN.pm but better.
And, of course, it's available on CPAN for people still using older versions of Perl. Why not try:
$ cpan CPANPLUS
Use cpan command as cpan Modulename
$ cpan HTML::Parser
To install dependencies automatically follow the below
$ perl -MCPAN -e shell
cpan[1]> o conf prerequisites_policy follow
cpan[2]> o conf commit
exit
I prefer App::cpanminus, it installs dependencies automatically. Just do
$ cpanm HTML::Parser
On ubuntu most perl modules are already packaged, so installing is much faster than most other systems which have to compile.
To install Foo::Bar at a commmand prompt for example usually you just do:
sudo apt-get install libfoo-bar-perl
Sadly not all modules follow that naming convention.
On Fedora Linux or Enterprise Linux, yum also tracks perl library dependencies. So, if the perl module is available, and some rpm package exports that dependency, it will install the right package for you.
yum install 'perl(Chocolate::Belgian)'
(most likely perl-Chocolate-Belgian package, or even ChocolateFactory package)
Even it should work:
cpan -i module_name
2 ways that I know of :
USING PPM :
With Windows (ActivePerl) I've used ppm
from the command line type ppm. At the ppm prompt ...
ppm> install foo
or
ppm> search foo
to get a list of foo modules available. Type help for all the commands
USING CPAN :
you can also use CPAN like this (*nix systems) :
perl -MCPAN -e 'shell'
gets you a prompt
cpan>
at the prompt ...
cpan> install foo (again to install the foo module)
type h to get a list of commands for cpan
On Fedora you can use
# yum install foo
as long as Fedora has an existing package for the module.
Easiest way for me is this:
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e 'install DateTime::TimeZone'
a) automatic recursive dependency detection/resolving/installing
b) it's a shell onliner, good for setup-scripts
If you want to put the new module into a custom location that your cpan shell isn't configured to use, then perhaps, the following will be handy.
#wget <URL to the module.tgz>
##unpack
perl Build.PL
./Build destdir=$HOME install_base=$HOME
./Build destdir=$HOME install_base=$HOME install
Sometimes you can use the yum search foo to search the relative perl module, then use yum install xxx to install.
Secure solution
Many answers mention the use of the cpan utility (which uses CPAN.pm) without a word on security. By default, CPAN 2.27 and earlier configures urllist to use a http URL (namely, http://www.cpan.org/), which allows MITM attacks, thus is insecure. This is what is used to download the CHECKSUMS files, so that it needs to be changed to a secure URL (e.g. https://www.cpan.org/).
So, after running cpan and accepting the default configuration, you need to modify the generated MyConfig.pm file (the full path is output) in the following way. Replace
'urllist' => [q[http://www.cpan.org/]],
by
'urllist' => [q[https://www.cpan.org/]],
Note: https is not sufficient; you also need a web site you can trust. So, be careful if you want to choose some arbitrary mirror.
Then you can use cpan in the usual way.
My bug report on rt.cpan.org about the insecure URL.
Simply executing cpan Foo::Bar on shell would serve the purpose.
Seems like you've already got your answer but I figured I'd chime in. This is what I do in some scripts on an Ubuntu (or debian server)
#!/usr/bin/perl
use warnings;
use strict;
#I've gotten into the habit of setting this on all my scripts, prevents weird path issues if the script is not being run by root
$ENV{'PATH'} = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin';
#Fill this with the perl modules required for your project
my #perl = qw(LWP::Simple XML::LibXML MIME::Lite DBI DateTime Config::Tiny Proc::ProcessTable);
chomp(my $curl = `which curl`);
if(!$curl){ system('apt-get install curl -y > /dev/null'); }
chomp(my $cpanm = system('/bin/bash', '-c', 'which cpanm &>/dev/null'));
#installs cpanm if missing
if($cpanm){ system('curl -s -L http://cpanmin.us | perl - --sudo App::cpanminus'); }
#loops through required modules and installs them if missing
foreach my $x (#perl){
eval "use $x";
if($#){
system("cpanm $x");
eval "use $x";
}
}
This works well for me, maybe there is something here you can use.
On Windows with the ActiveState distribution of Perl, use the ppm command.
I get this error:
Can't locate Foo.pm in #INC
Is there an easier way to install it than downloading, untarring, making, etc?
On Unix:
usually you start cpan in your shell:
$ cpan
and type
install Chocolate::Belgian
or in short form:
cpan Chocolate::Belgian
On Windows:
If you're using ActivePerl on Windows, the PPM (Perl Package Manager) has much of the same functionality as CPAN.pm.
Example:
$ ppm
ppm> search net-smtp
ppm> install Net-SMTP-Multipart
see How do I install Perl modules? in the CPAN FAQ
Many distributions ship a lot of perl modules as packages.
Debian/Ubuntu: apt-cache search 'perl$'
Arch Linux: pacman -Ss '^perl-'
Gentoo: category dev-perl
You should always prefer them as you benefit from automatic (security) updates and the ease of removal. This can be pretty tricky with the cpan tool itself.
For Gentoo there's a nice tool called g-cpan which builds/installs the module from CPAN and creates a Gentoo package (ebuild) for you.
Try App::cpanminus:
# cpanm Chocolate::Belgian
It's great for just getting stuff installed. It provides none of the more complex functionality of CPAN or CPANPLUS, so it's easy to use, provided you know which module you want to install. If you haven't already got cpanminus, just type:
# cpan App::cpanminus
to install it.
It is also possible to install it without using cpan at all. The basic bootstrap procedure is,
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
For more information go to the App::cpanminus page and look at the section on installation.
I note some folks suggesting one run cpan under sudo. That used to be necessary to install into the system directory, but modern versions of the CPAN shell allow you to configure it to use sudo just for installing. This is much safer, since it means that tests don't run as root.
If you have an old CPAN shell, simply install the new cpan ("install CPAN") and when you reload the shell, it should prompt you to configure these new directives.
Nowadays, when I'm on a system with an old CPAN, the first thing I do is update the shell and set it up to do this so I can do most of my cpan work as a normal user.
Also, I'd strongly suggest that Windows users investigate strawberry Perl. This is a version of Perl that comes packaged with a pre-configured CPAN shell as well as a compiler. It also includes some hard-to-compile Perl modules with their external C library dependencies, notably XML::Parser. This means that you can do the same thing as every other Perl user when it comes to installing modules, and things tend to "just work" a lot more often.
If you're on Ubuntu and you want to install the pre-packaged perl module (for example, geo::ipfree) try this:
$ apt-cache search perl geo::ipfree
libgeo-ipfree-perl - A look up country of ip address Perl module
$ sudo apt-get install libgeo-ipfree-perl
A couple of people mentioned the cpan utility, but it's more than just starting a shell. Just give it the modules that you want to install and let it do it's work.
$prompt> cpan Foo::Bar
If you don't give it any arguments it starts the CPAN.pm shell. This works on Unix, Mac, and should be just fine on Windows (especially Strawberry Perl).
There are several other things that you can do with the cpan tool as well. Here's a summary of the current features (which might be newer than the one that comes with CPAN.pm and perl):
-a
Creates the CPAN.pm autobundle with CPAN::Shell->autobundle.
-A module [ module ... ]
Shows the primary maintainers for the specified modules
-C module [ module ... ]
Show the Changes files for the specified modules
-D module [ module ... ]
Show the module details. This prints one line for each out-of-date module (meaning,
modules locally installed but have newer versions on CPAN). Each line has three columns:
module name, local version, and CPAN version.
-L author [ author ... ]
List the modules by the specified authors.
-h
Prints a help message.
-O
Show the out-of-date modules.
-r
Recompiles dynamically loaded modules with CPAN::Shell->recompile.
-v
Print the script version and CPAN.pm version.
sudo perl -MCPAN -e 'install Foo'
Also see Yes, even you can use CPAN. It shows how you can use CPAN without having root or sudo access.
Otto made a good suggestion. This works for Debian too, as well as any other Debian derivative. The missing piece is what to do when apt-cache search doesn't find something.
$ sudo apt-get install dh-make-perl build-essential apt-file
$ sudo apt-file update
Then whenever you have a random module you wish to install:
$ cd ~/some/path
$ dh-make-perl --build --cpan Some::Random::Module
$ sudo dpkg -i libsome-random-module-perl-0.01-1_i386.deb
This will give you a deb package that you can install to get Some::Random::Module. One of the big benefits here is man pages and sample scripts in addition to the module itself will be placed in your distro's location of choice. If the distro ever comes out with an official package for a newer version of Some::Random::Module, it will automatically be installed when you apt-get upgrade.
Already answered and accepted answer - but anyway:
IMHO the easiest way installing CPAN modules (on unix like systems, and have no idea about the wondows) is:
curl -L http://cpanmin.us | perl - --sudo App::cpanminus
The above is installing the "zero configuration CPAN modules installer" called cpanm. (Can take several minutes to install - don't break the process)
and after - simply:
cpanm Foo
cpanm Module::One
cpanm Another::Module
Many times it does happen that cpan install command fails with the message like
"make test had returned bad status, won't install without force"
In that case following is the way to install the module:
perl -MCPAN -e "CPAN::Shell->force(qw(install Foo::Bar));"
Lots of recommendation for CPAN.pm, which is great, but if you're using Perl 5.10 then you've also got access to CPANPLUS.pm which is like CPAN.pm but better.
And, of course, it's available on CPAN for people still using older versions of Perl. Why not try:
$ cpan CPANPLUS
Use cpan command as cpan Modulename
$ cpan HTML::Parser
To install dependencies automatically follow the below
$ perl -MCPAN -e shell
cpan[1]> o conf prerequisites_policy follow
cpan[2]> o conf commit
exit
I prefer App::cpanminus, it installs dependencies automatically. Just do
$ cpanm HTML::Parser
On ubuntu most perl modules are already packaged, so installing is much faster than most other systems which have to compile.
To install Foo::Bar at a commmand prompt for example usually you just do:
sudo apt-get install libfoo-bar-perl
Sadly not all modules follow that naming convention.
On Fedora Linux or Enterprise Linux, yum also tracks perl library dependencies. So, if the perl module is available, and some rpm package exports that dependency, it will install the right package for you.
yum install 'perl(Chocolate::Belgian)'
(most likely perl-Chocolate-Belgian package, or even ChocolateFactory package)
Even it should work:
cpan -i module_name
2 ways that I know of :
USING PPM :
With Windows (ActivePerl) I've used ppm
from the command line type ppm. At the ppm prompt ...
ppm> install foo
or
ppm> search foo
to get a list of foo modules available. Type help for all the commands
USING CPAN :
you can also use CPAN like this (*nix systems) :
perl -MCPAN -e 'shell'
gets you a prompt
cpan>
at the prompt ...
cpan> install foo (again to install the foo module)
type h to get a list of commands for cpan
On Fedora you can use
# yum install foo
as long as Fedora has an existing package for the module.
Easiest way for me is this:
PERL_MM_USE_DEFAULT=1 perl -MCPAN -e 'install DateTime::TimeZone'
a) automatic recursive dependency detection/resolving/installing
b) it's a shell onliner, good for setup-scripts
If you want to put the new module into a custom location that your cpan shell isn't configured to use, then perhaps, the following will be handy.
#wget <URL to the module.tgz>
##unpack
perl Build.PL
./Build destdir=$HOME install_base=$HOME
./Build destdir=$HOME install_base=$HOME install
Sometimes you can use the yum search foo to search the relative perl module, then use yum install xxx to install.
Secure solution
Many answers mention the use of the cpan utility (which uses CPAN.pm) without a word on security. By default, CPAN 2.27 and earlier configures urllist to use a http URL (namely, http://www.cpan.org/), which allows MITM attacks, thus is insecure. This is what is used to download the CHECKSUMS files, so that it needs to be changed to a secure URL (e.g. https://www.cpan.org/).
So, after running cpan and accepting the default configuration, you need to modify the generated MyConfig.pm file (the full path is output) in the following way. Replace
'urllist' => [q[http://www.cpan.org/]],
by
'urllist' => [q[https://www.cpan.org/]],
Note: https is not sufficient; you also need a web site you can trust. So, be careful if you want to choose some arbitrary mirror.
Then you can use cpan in the usual way.
My bug report on rt.cpan.org about the insecure URL.
Simply executing cpan Foo::Bar on shell would serve the purpose.
Seems like you've already got your answer but I figured I'd chime in. This is what I do in some scripts on an Ubuntu (or debian server)
#!/usr/bin/perl
use warnings;
use strict;
#I've gotten into the habit of setting this on all my scripts, prevents weird path issues if the script is not being run by root
$ENV{'PATH'} = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin';
#Fill this with the perl modules required for your project
my #perl = qw(LWP::Simple XML::LibXML MIME::Lite DBI DateTime Config::Tiny Proc::ProcessTable);
chomp(my $curl = `which curl`);
if(!$curl){ system('apt-get install curl -y > /dev/null'); }
chomp(my $cpanm = system('/bin/bash', '-c', 'which cpanm &>/dev/null'));
#installs cpanm if missing
if($cpanm){ system('curl -s -L http://cpanmin.us | perl - --sudo App::cpanminus'); }
#loops through required modules and installs them if missing
foreach my $x (#perl){
eval "use $x";
if($#){
system("cpanm $x");
eval "use $x";
}
}
This works well for me, maybe there is something here you can use.
On Windows with the ActiveState distribution of Perl, use the ppm command.
I've found myself on CentOS without root access, and with a very lame Perl that doesn't even have ExtUtils::MakeMaker.
Does there exist something that could produce an archive of a module's dependencies, for my to unwrap into a directory that I could put into #INC?
use App::cpanminus
cd ~/bin
curl -LO http://xrl.us/cpanm
chmod +x cpanm
export ROOT=/some/directory
export PERL5LIB=${ROOT}/lib/perl5
Then, install ExtUtils::MakeMaker and Module::CoreList. You can't do a simple installation because these modules are used by cpanm, and it doesn't look in the unpacked source directory for them. So, get cpanm to download them, and do a semi-manual install. It actually installs three distributions (the above two and ExtUtils::Install), which is why you get to invoke the build mantra three times:
PERL_MM_OPT=INSTALLBASE=$ROOT ./cpanm -L $ROOT --look ExtUtils::MakeMaker Module::CoreList
perl Makefile.PL
make && make install
exit
perl Makefile.PL
make && make install
exit
perl Makefile.PL
make && make install
exit
It unpacks and cds into each distribution's directory successively. At least that's what happens on a bare-bones CentOS 6 install I just happen to have lying around.
After that, you should be able to install your module and its dependencies via
./cpanm -L $ROOT <module name, or url, or tarball goes here>
Look at the cpanm docs for more info.
You could use perlbrew to innstall a full new Perl with user access.
http://perlbrew.pl/
#install perlbrew
wget -O - http://install.perlbrew.pl | bash
# install new perl for youurself
perlbrew install perl-5.16.0
# set aliases
perlbrew switch perl-5.16.0
#reinstall all moodules for new perl http://perlbrew.pl/Reinstall-All-Modules-On-New-Perl.html
perlbrew list-modules | perlbrew exec --with perl-5.16.0 cpanm
#how to install/recompile third party modules
https://github.com/lecstor/DevNotes/wiki/Image-Magick-with-Perlbrew
Regards,
Download and untar ExtUtils::MakeMaker, create a directory lib under your home directory, install via:
perl Makefile.PL PREFIX=~/lib LIB=~/lib
Now that module is installed I suggest you use local::lib (easy install via the bootstrap method in the documentation) to install modules:
perl -MCPAN -Mlocal::lib -e 'CPAN::install(MIME::Lite)' # Replace MIME::Lite with what you want to install.
Here MIME::Lite gets installed via cpan to your local lib directory.
Prelbrew won't take long to set up, and you likely have an easier time of things in the long run.
Edit, too long for comment.
#LeeGee Perhaps I wasn't specific enough.
The method described will allow you to get around the restricted version of perl you have access to, and allow installaton of modules to another location.
If you want to package your app on another machine you could use either PAR or pp to create a standalone package of code & modules, or a stand alone executable.
Failing that Module::ScanDeps will find a scripts dependencies
I have downloaded the module Digest::SHA1 and extracted it to a directory (../Digest-SHA1-2.13/) , then copied all the SHA1.* files into (../Digest-SHA1-2.13/Digest)
and in the perl script, I did : use Digest::SHA1;
launching the script like this:
perl -I ../Digest-SHA1-2.13/Digest perlscriptname.pl
I get this error:
Can't locate loadable object for module Digest::SHA1 in #INC
I assume it has something to do with a shared library (*.so)?, I have no idea how to continue from here.
I can install it directly using CPAN (-MCPAN) module, as I dont have permissions on that server to do that, and can install only locally (where the application is running).
My final goal is to use Algorithm::CouponCode which is dependent on Digest::SHA1
The weird part is, that I have Digest::SHA1 installed (perl -MDigest::SHA1 -e 'print $Digest::SHA1::VERSION' shows version 2.11), still Algorithm::CouponCode (which is installed the same way I did with Digest::SHA1) complains it can find it in #INC
thanks!
Use this recipe for manually installing perl modules:
tar zxf Digest-SHA1-2.13.tar.gz
cd Digest-SHA1-2.13
perl Makefile.PL
make
make test
make install
Note that some distributions will have a Build.PL file instead of Makefile.PL. In that case use this recipe:
tar zxf ...
cd ...
perl Build.PL
./Build
./Build test
./Build install
(You may be able to get by with just running make install and ./Build install.)
If you need to alter the installation dir then use:
perl Makefile.PL INSTALL_BASE=...
or
perl Build.PL --install_base ...
depending on the kind of module.
For more info see the perldoc for ExtUtils::MakeMaker::FAQ and Module::Build
There are two kinds of Perl module: pure-Perl and XS. Pure-Perl modules are written entirely in Perl, and can usually be installed just by copying the .pm files to an appropriate directory. XS modules are written in both Perl and C (XS is processed into C code by the ExtUtils::ParseXS module) and require a C compiler to install them.
As dsolimano said, the easiest way to install Perl modules for the system Perl when you don't have root access is to use local::lib. (You could do the same things that local::lib does yourself, but why bother?)
The reason why Digest::SHA1 works by itself but not when you're using Algorithm::CouponCode is that the system Perl already has version 2.11 of Digest::SHA1 installed. When you use -I ../Digest-SHA1-2.13/Digest, then use Digest::SHA1 picks up the Perl code from ../Digest-SHA1-2.13/Digest, but the shared library that would be built from the XS code is not in the corresponding location.
Any reason why you can't use local::lib?
create and use a local lib/ for perl modules with PERL5LIB
It is basically a tool to help you use a private (non-systemwide) directory as your Perl library directory.
After setting it up, you could run a command like
perl -MCPAN -Mlocal::lib -e 'CPAN::install(Algorithm::CouponCode)'
and then your script would use your locally installed copy of Algorithm::CouponCode).