I want to use this plugin: git-plugin -> https://github.com/rundeck-plugins/git-plugin
but i'm face to an issue. When i use it, it failed with that error:
Workflow result: , step failures: {1=PluginFailed: No such property: op for class: com.rundeck.plugin.GitCloneWorkflowStep
However, the installation is quite easy and straight forward.
Just download .jar and put it in /var/lib/rundeck/libext folder with good rights.
I have already used it with success in another instance of rundeck.
But here, i don't know why it doesn't work.
Any tips or advice ?
regards
I reproduced the issue:
[2020-04-07 09:15:48.511] ERROR ExecutionUtilService --- [eduler_Worker-7] Execution failed: 8 in project ProjectGITHUB: [Workflow result: , step failures: {1=PluginFailed: No such property: op for class: com.rundeck.plugin.GitCloneWorkflowStep}, status: failed]
You need to put the path of your repo (Git URL textbox) on the Git Clone workflow step in this way (i used HTTPS way to connect):
https://user#github.com/user/test.git
Instead of:
https://user#github.com/user
(or an inexistent URL address)
Here you can see how to configure it. And here a Related thread.
Related
This error is popping-up intermittently while trying to deploy my github webpages. I have no clue what to do, I already deleted and recreated the repository but the error persists. I have the same problem for all my github pages repositories.
Here is one repository example: https://github.com/cnftstats/borgs
Run actions/deploy-pages#v1
Actor: github-pages[bot]
Action ID: 1998855719
Artifact URL: https://pipelines.actions.githubusercontent.com/odmqpuZ7yGar25NNWIM53v9pBjO9vEwDjecGIYtf9ECZfcxi8V/_apis/pipelines/workflows/1998855719/artifacts?api-version=6.0-preview
{"count":1,"value":[{"containerId":359584,"size":14684160,"signedContent":null,"fileContainerResourceUrl":"https://pipelines.actions.githubusercontent.com/odmqpuZ7yGar25NNWIM53v9pBjO9vEwDjecGIYtf9ECZfcxi8V/_apis/resources/Containers/359584","type":"actions_storage","name":"github-pages","url":"https://pipelines.actions.githubusercontent.com/odmqpuZ7yGar25NNWIM53v9pBjO9vEwDjecGIYtf9ECZfcxi8V/_apis/pipelines/1/runs/21/artifacts?artifactName=github-pages","expiresOn":"2022-06-15T13:26:01.9505756Z","items":null}]}
Creating deployment with payload:
{
"artifact_url": "https://pipelines.actions.githubusercontent.com/odmqpuZ7yGar25NNWIM53v9pBjO9vEwDjecGIYtf9ECZfcxi8V/_apis/pipelines/1/runs/21/artifacts?artifactName=github-pages&%24expand=SignedContent",
"pages_build_version": "bf8f96d22c5dd116a5d94ee24cd398bdda60035f",
"oidc_token": "***"
}
Failed to create deployment for bf8f96d22c5dd116a5d94ee24cd398bdda60035f.
{"message":"Deployment request failed for bf8f96d22c5dd116a5d94ee24cd398bdda60035f due to in progress deployment. Please cancel e92de3f483b775a12d4f784d7cc661ff2847fa62 first or wait for it to complete.","documentation_url":"https://docs.github.com/rest/reference/repos#create-a-github-pages-deployment"}
Error: Error: Request failed with status code 400
Error: Error: Request failed with status code 400
Sending telemetry for run id 1998855719
GitHub Actions is currently experiencing degraded performance and published this on their status page. Therefore, you are most likely experiencing a side effect of the current problems. Other users are reporting the same issue as well. Try again later when the issue has been resolved by GitHub.
Update: More products are now affected and experience degraded performance. Check their status page for more details: https://www.githubstatus.com
[It was a bug of GitHub, happens to all its users---date: 18/03/2022]
It happens to me today too.. :(
Maybe is a bug of GitHub pages: https://github.com/actions/deploy-pages/issues/22
https://github.community/t/pages-deploy-wedged-incorrect-request-failed-due-to-in-progress-deployment/234793/4
now I'm trying to conduct load test with gatling.
I have been trying create gatling's simulation script via gatling recorder and
it was going well.
but, when I executed that, I encountered file not found error below although there are files
(in this case /step1/0006_request.json is exist)
request_6: Failed to build request: Resource /step1/0006_request.json not found
there are many json files and that error occurred some of specific post requests.
every requests which is failed are composed following setting.
using request header 'headers_6' below
using RawFileBody method
(even if this is obvious thing because content-type is 'application/json')
I already have been using 12 hour over and I have to finish my task in a timely manner.
I'm so sorry about that I can't share my application which is target of this issue.
if anyone have any idea or kindly want to more detail please ask me.
val headers_6 = Map(
"Content-Type" -> "application/json",
"Origin" -> "applicationServerURL")
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("/step1/0006_request.json"))
.resources(http("request_7")
additionally, I checked json files which were created by gatling recorder on 'resource' directory, them contains only one char 'X'.
this means Gatling recorder doesn't capture request json file's content?
env:
Gatling version gatling 3.5.1
Used Browser: FireFox
I just solved this issue.
this issue was caused by very simple fact.
firstly, I encountered error message below
request_6: Failed to build request: Resource /step1/0006_request.json not found
and I have to check the file paths although this script was auto created by gatling recorder(do not trust gatling tool).
The auto created file path was absolute path and start with ‘/’. And the script started to work once I remove the ‘/’.
I referred other post on stack overflow, and it was written that file path must be written with absolute path if you are using gatling version 3 or later version.
I hope my reply can be informative to someone who may be having same issue as me.
Using 'relative path'.
//As is
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("/step1/0006_request.json"))
.resources(http("request_7")
//To be
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("step1/0006_request.json"))
.resources(http("request_7")
I have a new laptop and I try to render the Changelogs of TYPO3 locally based on the steps on https://docs.typo3.org/m/typo3/docs-how-to-document/master/en-us/RenderingDocs/Quickstart.html#render-documenation-with-docker. It continues until the end but show some non-zero exit codes at the end.
project : 0.0.0 : Makedir
makedir /ALL/Makedir
2021-02-16 10:32:50 654198, took: 173.34 seconds, toolchain: RenderDocumentation
REBUILD_NEEDED because of change, age 448186.6 of 168.0 hours, 18674.4 of 7.0 days
OK:
------------------------------------------------
FINAL STATUS is: FAILURE (exitcode 255)
because HTML builder failed
------------------------------------------------
exitcode: 0 39 ms
When I run the command in another documentation project, it renders just fine.
I found the issue with this. It seemed the docker container did not have enough memory allocated. I changed the available memory from 2 Gb to 4 Gb in Docker Desktop and this issue is solved with that.
You already solved the problem. But in case of similar errors: To get more information on a failure, you can also use this trick:
Create a directory tmp-GENERATED-temp before rendering. Usually, this is automatically created and then removedd after rendering. If you create it before rendering, you will find logfiles with more details in this directory.
See the Troubleshooting page.
I had some errors where I found the output in the console insufficient and this helped me to narrow down the problem.
In case of other problems, I would file an issue in the GitHub repo: https://github.com/t3docs/docker-render-documentation
Note: This is specific to TYPO3 docs rendering and may change in the future.
I've an issue (I'm still blocked), I've created my configuration file like :
project_identifier: test
api_key: KeepTheAPIkeySecret
base_url: https://api.crowdin.com
base_path: /path/to/your/project
files:
-
source: /locale/en/LC_MESSAGES/messages.po
translation: /locale/%two_letters_code%/LC_MESSAGES/%original_file_name%
See : https://github.com/crowdin/crowdin-cli
However, I received an error message when I execute my command line to upload translation in Crowdin :
error: Seems Crowdin server API URL is not valid.
Please check the `base_url` parameter in the configuration file.
I don't know why it's not working!Thanks for any help !
Crowdin sent me another JAR,
The last one was not good for windows path.
I am facing this exception when I trying to create the sp.xml using the ssoadmin :
com.sun.identity.cli.CLIException: AdminTokenAction: FATAL ERROR: Cannot obtain Application SSO token.
Check AMConfig.properties for the following properties
com.sun.identity.agents.app.username
com.iplanet.am.service.password
at com.sun.identity.cli.LogWriter.log(LogWriter.java:109)
at com.sun.identity.cli.Authenticator.ldapLogin(Authenticator.java:170)
at com.sun.identity.cli.AuthenticatedCommand.ldapLogin(AuthenticatedCommand.java:144)
at com.sun.identity.federation.cli.CreateMetaDataTemplate.handleRequest(CreateMetaDataTemplate.java:113)
at com.sun.identity.cli.SubCommand.execute(SubCommand.java:291)
at com.sun.identity.cli.CLIRequest.process(CLIRequest.java:212)
at com.sun.identity.cli.CLIRequest.process(CLIRequest.java:134)
at com.sun.identity.cli.CommandManager.serviceRequestQueue(CommandManager.java:573)
at com.sun.identity.cli.CommandManager.(CommandManager.java:171)
at com.sun.identity.cli.CommandManager.main(CommandManager.java:148)
And I also tried adding something like this in the ssoamdin.bat :
-D"com.iplanet.am.naming.map.site.to.server=https://lb.example.com:443/openam=http://server1.example.com:8080/openam"
But the same exception...
How to fix it?
Thanks in advance,
The 'map-to-site' property is only needed if you have a site configured an the host where you run ssoadm is not able to talk to the siteURL.
You may set -Dcom.iplanet.services.debug.level=message -Dcom.iplanet.services.debug.directory=WRITABLE_EXISTING_DIRECTORY' as JVM options within ssoadm.bat.
You may then look into the debug directory you should find a pointer what's wrong.
The above got sorted in my case when i went to the ssoadmin folder openam/bin and found the ssoadm.bat file and opened it in the edit mode and added the following two lines in the java comaand :
-D"javax.net.ssl.trustStore=F:\tomcatsslkeystore" (tomcat keystore path)
-D"javax.net.ssl.trustStorePassword=tomcatsslkeystore" (tomcat keystore password)