I have a new laptop and I try to render the Changelogs of TYPO3 locally based on the steps on https://docs.typo3.org/m/typo3/docs-how-to-document/master/en-us/RenderingDocs/Quickstart.html#render-documenation-with-docker. It continues until the end but show some non-zero exit codes at the end.
project : 0.0.0 : Makedir
makedir /ALL/Makedir
2021-02-16 10:32:50 654198, took: 173.34 seconds, toolchain: RenderDocumentation
REBUILD_NEEDED because of change, age 448186.6 of 168.0 hours, 18674.4 of 7.0 days
OK:
------------------------------------------------
FINAL STATUS is: FAILURE (exitcode 255)
because HTML builder failed
------------------------------------------------
exitcode: 0 39 ms
When I run the command in another documentation project, it renders just fine.
I found the issue with this. It seemed the docker container did not have enough memory allocated. I changed the available memory from 2 Gb to 4 Gb in Docker Desktop and this issue is solved with that.
You already solved the problem. But in case of similar errors: To get more information on a failure, you can also use this trick:
Create a directory tmp-GENERATED-temp before rendering. Usually, this is automatically created and then removedd after rendering. If you create it before rendering, you will find logfiles with more details in this directory.
See the Troubleshooting page.
I had some errors where I found the output in the console insufficient and this helped me to narrow down the problem.
In case of other problems, I would file an issue in the GitHub repo: https://github.com/t3docs/docker-render-documentation
Note: This is specific to TYPO3 docs rendering and may change in the future.
Related
i updated a project from TYPO3 7.6 to ^8 by following the official guide. latest steps were the composer update. i removed extensions/packages not compatible with ^8 and updated the ones available for ^8. im able to reach the install tool, the TYPO3 admin backend and the frontend (with errors).
so i ended up at the step were i should use the upgrade wizards provided by the install tool. i completed a few wizards without any issues but then faces a pretty one - first i tried to run DatabaseRowsUpdateWizard within the install tool but that failed with a memory error - i tried the cli approach with
php -d memory_limit=-1 vendor/bin/typo3cms upgrade:wizard DatabaseRowsUpdateWizard
the processing worked but it ended up with following error:
[ Helhum\Typo3Console\Mvc\Cli\FailedSubProcessCommandException ]
#1485130941: Executing command "upgrade:subprocess" failed (exit code: "1")
thrown in file vendor/helhum/typo3-console/Classes/Install/Upgrade/UpgradeHandling.php
in line 284
the command initially failed is:
'/usr/bin/php7.2' 'vendor/bin/typo3cms' 'upgrade:subprocess' '--command' 'executeWizard' '--arguments' 'a:3:{i:0;s:24:"DatabaseRowsUpdateWizard";i:1;a:0:{}i:2;b:0;}'
and here is the subprocess exception:
[ Sub-process exception: TYPO3\CMS\Core\Resource\Exception\InvalidPathException ]
#1320286857: File ../disclaimer_de.html is not valid (".." and "//" is not allowed in path).
thrown in file typo3/sysext/core/Classes/Resource/Driver/AbstractHierarchicalFilesystemDriver.php
in line 71
im pretty much lost and dont know were to start to get this fixed - help is much appreciated
Issues like these usually stem from broken URLs in RTE fields as can be seen in the error output:
File ../disclaimer_de.html is not valid (".." and "//" is not allowed in path)
In this case you should manually prepare the database and run SQL statements which replace the broken/obsolete ../ prefix from all affected records. An example query:
UPDATE tt_content
SET bodytext = REPLACE(bodytext, 'href="../', 'href="')
WHERE bodytext LIKE '%href="../';
Notice that this query is very basic and can destroy your data, so make sure you run some SELECT statements first to make sure nothing breaks. Also keep a backup of your database at hand.
Sometime, custom or TER extension also have RTE such as tt_news where you might come across same issue. To fix that, you just need to run the same query with the according table.
I am having an odd issue with Google Ortools vehicle routing example, found here:
https://developers.google.com/optimization/routing/tsp/vehicle_routing
Using Windows 10, and Python 3.6...
When executing the full program code provided in the link above, the program freezes up and exits. Command line provides the following:
WARNING: Logging before InitGoogleLogging() is written to STDERR
F0502 21:33:22.115679 7972 search.cc:2658] Check failed: step > 0 (0 vs. 0)
*** Check failure stack trace: ***
I have honed the code causing the freeze down to this line of code:
assignment = routing.SolveWithParameters(search_parameters)
I am certain I have the library properly installed because other examples of the program have run successfully. I attempted to use Visual Studio, and even went so far as to disable my second GPU.
I am wondering if anyone has encountered this issue and possibly knows how to fix. Thank You.
Issue was solved as follows:
Original model on google's website creates the following variable:
search_parameters = pywrapcp.DefaultRoutingSearchParameters()
I had changed to:
search_parameters = pywrapcp.RoutingModel.DefaultModelParameters()
But the required change should be:
search_parameters = pywrapcp.RoutingModel.DefaultSearchParameters()
I have a project that has been running well for a long time now.
Recently (couple of weeks) the system tests are failing.
After a lot of investigation we concluded that protractor fails to identify and close an alert.
The code that used to work
exports.removeFaq = function( index ){
console.log('deleting item at',index);
exports.getContent(index).$( '[ng-click="removeFAQ($index)"]').click();
browser.sleep(2000);
browser.switchTo().alert().accept();
return browser.sleep(2000);
};
is now throwing errors:
WebDriverError: unknown error: cannot determine loading status
from unexpected alert open
(Session info: chrome=52.0.2743.116)
(Driver info: chromedriver=2.21.371461 (633e689b520b25f3e264a2ede6b74ccc23cb636a),platform=Linux 4.2.0-38-generic x86_64) (WARNING: The server did not provide any stacktrace information)
and (using element explorer):
> browser.switchTo().alert().accept();
UnexpectedAlertOpenError: unexpected alert open: {Alert text : are you sure you want to remove this helper content?}
(Session info: chrome=52.0.2743.116)
(Driver info: chromedriver=2.21.371461 (633e689b520b25f3e264a2ede6b74ccc23cb636a),platform=Linux 4.2.0-38-generic x86_64) (WARNING: The server did not provide any stacktrace information)
We've tried
- waiting instead of sleeping.
- sleeping for a long period
- ignoring angular.
nothing seems to make any difference whatsoever.
how can I fix this?
We had the same issue for a couple of days. Looks like we were on chromedriver 2.21. I updated to the latest version (2.23) and that seems to have fixed the issue.
The command webdriver-manager update --chrome did not work for me so I had to download the zip and extract it to my selenium directory. Under protractor.
Note there is a new protractor major version with updated versions. So updating protractor might fix the problem too.
for protractor version 3.x
You can also modify the file node_modules/protractor/config.json with the correct version and then run webdriver-manager update
for protractor version 4.x
You should modify the file ./node_modules/protractor/node_modules/webdriver-manager/config.json instead.
How can we say for sure that sleep of 2000ms is good enough? Exactly for this reason sleeps are not recommended in tests. Instead you can use proper waits and poll for alert. This way you would know that after a certain agreed timeout, alert never showed up and test rightfully failed
//wait maximum up to lets 5s before giving up
browser.wait(protractor.ExpectedConditions.alertIsPresent(), 5000);
browser.switchTo().alert().accept();
Starting on 1/13, our Adobe CQ6.0 SP1 error logs started filling up with:
GET /bin/wcm/contentfinder/product/view.json/etc/commerce/products HTTP/1.1] org.apache.jackrabbit.oak.plugins.index.property.strategy.ContentMirrorStoreStrategy Traversed 1041307000 nodes using index jcr:lastModified with filter Filter(query=select [jcr:path], [jcr:score], * from [nt:base] as a where isdescendantnode(a, '/etc/commerce/products') order by [jcr:lastModified] desc /* xpath: /jcr:root/etc/commerce/products//* order by #jcr:lastModified descending /, path=/etc/commerce/products//)
The error logs are huge and AEM 6.0 ran out of disk space:
error.log.2015-01-13: 30295763555 bytes
error.log.2015-01-14: 52886323200 bytes
We are able to reproduce the problem by issuing the following HTTP request against AEM Author:
GET /bin/wcm/contentfinder/product/view.json/etc/commerce/products
This issue suddenly on 1/13/2015, 9:47 a.m., with a co-worker loading a site in AEM 6.0, and ContentFinder never loaded, so she removed cf#, and then was able to proceed with the authoring of the content itself.
We are interested in knowing if others have had similar issues with ContentFinder in AEM6.0.
AEM 6.0 has a bug in the Querybuilder related to Oak 1.0.5. We need Oak to be upgraded to v1.0.9. The following URI has more information:
http://helpx.adobe.com/experience-manager/kb/aem6-available-hotfixes.html
SP1 needs to be installed first and then the hot fixes need to be installed in the given order over SP1. The two sample index packages (damLucene.zip and productsIndex.zip) need to be installed as well. These add the following indices:
/oak:index/damLucene
/etc/commerce/products/ntbaseProductsLucene
Sorry, not really programming question, but I am not sure where else I could find some help.
After a recent update (Xorg was updated among other things), GTK apps stopped running in my kde4. I have a Debian unstable, updated around 22 April. When I try to run them I get the following error:
ga#grzes:~$ iceweasel
The program 'firefox-bin' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadName (named color or font does not exist)'.
(Details: serial 888 error_code 15 request_code 45 minor_code 0)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
ga#grzes:~$ gimp The program 'gimp' received an X Window
System error.
This probably reflects a bug in the program.
The error was 'BadName (named color or font does not exist)'.
(Details: serial 6955 error_code 15 request_code 45 minor_code 0)
(Note to programmers: normally, X errors are reported asynchronously;
that is, you will receive the error a while after causing it.
To debug your program, run it with the --sync command line
option to change this behavior. You can then get a meaningful
backtrace from your debugger if you break on the gdk_x_error() function.)
(script-fu:4643): LibGimpBase-WARNING **: script-fu: gimp_wire_read():
error
I have to restart the font server manually to have it fixed:
ga#grzes:~$ su
Password:
grzes:/home/ga# /etc/init.d/xfs restart
Stopping X font server: xfs.
Setting up X font server socket directory /tmp/.font-unix...done.
Starting X font server: xfs.
Any ideas what could be wrong? Is it a configuration issue? My system has been updated for the last 7 years, so I can have some old settings.
Debian unstable is very... unstable now, since a release was made a short time ago. Major changes and packages migrations are happening. Xorg (and all X related stuff) being one of the critical packages in that process. My advice is to perform a new update/upgrade in order to catch a new version that may resolve this problem.
It's very frequent that after an update some thing will get broken in inexplicable ways, simply because the developers are uploading new, and not much tested, version of the applications
I finally figured this out: seems like xfs is not compatible with the other components currently and luckily removing it form the system completely solves the problem.