A few weeks ago, refactoring code using F2 worked without any confirmation. Since a few days, however, using F2 opens up a "Refactor preview" tab in the bottom panel.
The refactoring will not be done until I manually check what I want to refactor, and click the checkmark at the top right.
I cannot find anything online or in the vscode settings. Can this be disabled so that the refactoring automatically proceeds like it used to?
Are you accidentally pressing Shift + Enter after renaming?
This behavior should only happen after you press F2, change the name of the item, and then press Shift + Enter. Pressing only enter should automatically perform the rename without the refactor preview tab opening. The rename box states this:
In case its not clear, here is a video that illustrates this.
Note: This solution is only for c/c++ case. The reason is that C/C++ extension is doing bad in analyzing the code and relies on user to determine which ones to rename, then the preview panel is poped up for this.
Try disable Editor > Rename: Enable Preview in settings, and then restart vscode.
If the problem still exists, try replace C/C++ extension's intellisense with clangd:
Install clangd extension in vscode;
Disable C/C++ extension's intellisense by adding this to settings.json:
"C_Cpp.intelliSenseEngine": "Disabled"
Then vscode will adopt clangd's intellisense, which renames without a preview.
Uninstalling C/C++ extension is NOT recommended because intergrated gdb will be lost, but you can try lldb as a substitude:
Install CodeLLDB extension in vscode;
Configure cmake's default debug type to lldb in settings.json:
"cmake.debugConfig": {
"type": "lldb"
}
Related
When I attempt to save my file on Visual Studio Code with the cmd+s keyboard shortcut, it does not save the code. I have to manually click File, the Save, just to be able to save my progress. I'm using macOS Catalina version 10.15.7 and VC Code version 1.55.2.
How do I fix this?
Attempts:
-Checked if ⌘ Cmd + S keyboard shortcut is tied to the Save functionality
If you do it right this solution will fix your issue.
I have never had a problem saving with VS-Code personally, but I have had issues with keybindings. IDK if you write your own keybindings, but if you do, you might want to check the keybindings that you have wrote to make sure they do not conflict with [CTRL + S]. The keybindings.json file that you create custom keybindings in, overrides the default keybindings.json file that defines the keybindings that VS-Code ships with.
To check your keybindings.json file...
Hit the F1-Key
A menu will drop open type in "Keyboard Shortcuts"
There will be two Preferences: Keyboard Shortcuts
Make sure to select Preferences: Keyboard Shortcuts and not Preferences: Default Keyboard Shortcuts
If the file is empty you are good. If you have keybindings written in the file, you need to iterate through them by hand, checking each one. Make sure that none use [CTRL + S] together. Even if the keybinding uses [CTRL + S] and other keys, you will need to disable it, so you can test if it is causing an issue.
Debugging [CTRL + S]
If your keybindings.json file is all good, then great, that's one thing to scratch off the list. The only thing left to do now is debug the Bound Key ("Key Binding"). To debug keybindings, you will use a built in tool, that VS-Code offers. To start do the following:
Hit the F1-Key
When the quick input drops open type the following into the text input:
"Toggle Keyboard Shortcuts Troubleshooting"
Select the option: Developer: Toggle Keyboard Shortcuts Troubleshooting
It should automatically open the OUTPUT panel, which is located in the same panel that your terminal is. Make sure that the OUTPUT is set to LOG(Window) in the drop down. (I took a picture and posted it below if you can't find the Keyboard Shortcut Troubleshooter).
The image might have funny declensions because I am on a dual monitor setup with 1 1080x1920 curved screen and one 1080x720 screen.... I cropped it to a STD HD 1920 width.
I Got My Trouble-shooter working, and Output open, now What Jay?
Okay... Well your at the right spot. Now every-time you press some keys, you should see your OUTPUT WINDOW working like crazy. It should be logging all sorts of stuff, which is good, very good.
This Part Is Important! READ CAREFULLY
What you want to do is use your keybinding that you feel isn't working appropriately. Use it when focus is set on an editor, use it when focus is set on a different editor, use it when focus is set on the sidebar. Where you are focused at in the editor at any given time can greatly affect a keybinding. The output is gonna write lines every-time you use your keybinding. Try not to hit any other keys while doing this, so you have a column in you output that includes logging from the keybinding you are testing only. Read the output see what it says. See if it looks right, or wrong. If it looks wrong, you can visit this link, to the VSCode site that covers this topic, and see if you can fix it your self. If you can't fix it your self, come back here, and edit your question. When you edit your question make sure that it includes the Troubleshooter's Logging Output.
VSCode Troubleshooting Keybindings (Keyboard Shortcuts) # https://code.visualstudio.com/docs/getstarted/keybindings#_troubleshooting-keybindings
Image that shows how to open the Keyboard Debugger
Also shows how to set the OUTPUT to Log(Window)
StackOverflow-2021-JUNE-26018:34-PST
Another thing to check for is, for lack of a better term, combination key bindings. For example, I was having an issue with ⌘+s. VSCode gave a message that it was waiting for the second key binding. After looking at the keybindings.json, I noticed I had a key binding for opening up user snippets as
{
"key": "cmd+s cmd+n",
"command": "workbench.action.openSnippets"
}
The ⌘+s portion of this key binding conflicted with the default ⌘+s
I'm using VScode for writing my Python codes. I'm using the 2 extensions Pylance and Python for docstrings. However, I find it annoying that these extensions alter the mouse right-click menu, and the mouse right-click action. Is there any way to stop these extensions from modifying this?
Is there any way to remove all these unnecessary options from the right-click menu?
Setup:
VSCode 1.50.1
MacOS High Sierra (10.13.6) - but I think this applies to any OS
Steps to Reproduce:
this is a quick simple one...
click on/hghlight/open a markdown file (.MD extension) in VSCode / from the Explorer tree hierarchy in the Left Nav Pane,
hit SHIFT-COMMAND-V per numerous instructional posts/tutorials - (you can also find the shortcut clearly labeled with that very same Shortcut Key-Combo:
if you RIGHT-CLICK on the file in question...
you will get a Context Menu with several options, include Markdown Preview
hitting the stated key combo of SHIFT-COMMAND-V does nothing,i.e.:
no observable effect in current window or tab
does not open any other tabs
does not render markdown
BEFORE YOU DO ANYTHING:
--
This may seem STUPID/OBVIOUS to most of you... I think I was still asleep when I first tried this... so:
make sure that your cursor is ACTIVE in your .MD markdown document, and NOT active on the filename in the Explorer
Tree in the left-hand Nav
apparently, in VSCode this shortcut SHIFT-COMMAND-V only works when you are ACTIVELY EDITING the file.
using the mouse on the RIGHT-CLICK context menu works fine
even if the .MD file isn't open AT ALL / in ANY EDITOR
even if you're actually actively editing A DIFFERENT FILE, if you hover over the filename in the Explorer/File-Folder Hierarchy,
RIGHT-CLICK and launch Mark Preview, it will work.
Quick Solution:
You most likely have a VSCode "Extension" installed and enabled within VSCode that is blocking the default VSCode shortcuts
in my case, this was Atom Keymap Extension (Here's link to extension in VS Marketplace)
IN VSCode, go to Extensions, find (you can search in the search bar at the top of the Extensions list/Nav Pane) Atom Keymap and UNINSTALL IT
alternately, you can just simplt DISABLE IT if you prefer to use it another time.
restart VSCode
SHIFT-COMMAND-V shortcut SHOULD BE WORKING NOW!
Troubleshooting:
Key Combo not recognized in VSCode (at least in VSCode, see#2 if blocked elsewhere)
If you look at the very bottom-middle/bottom-right of the VSCode window, you will notice the Status Bar (by default the whole bar is bright blue with white text)..
the status bar has several different sections, symbols, and text messages...
you will notice it changes/will indicate when you press a VALID Key-Combo... and that SHIFT-COMMAND-V literally does not result in ANY message on the status bar
But hitting COMMAND-V for instance is reflected in a real-time corresponding message in the status bar telling you that you DID press COMMAND-V
It appears NOT for any Key-Combo that includes SHIFT isn't recognized
confirm it's a VSCode thing only
go to your MacOS System Preferences > Keyboard > Shortcuts > look through each category of shortcuts - you should NOT SEE a key mapping for SHIFT-COMMAND-V
I used to have an old VSCode version, where i used ctrl+tab to navigate through recently opened tabs.
when i pressed the combination a dropdown will appear where i could see the recently opened tabs. Then, if i pressed ctrl+tab again, it would cycle through those tabs.
Recently, I updated VSCode to a newer version. Now, if i press ctrl+tab the dropdown appears like it used to. But, when i press it again, it doesn't cycle through tabs anymore. Instead, it will open the last tab that I've accessed.
I've tried :
uninstalling
reinstalling
removing the setting an reinstalling the older version
But still, that ctrl+tab functionality seems gone. can you help me restore it?
Check your keyboard shortcuts. Find the command:
workbench.action.quickOpenNavigateNextInEditorPicker
By default it is set to Ctrl-Tab, if yours is not, set it that keybinding by clicking on the pencil icon to the left of the command on hover and enter Ctrl-Tab into the dialog box.
That command should also be using the when clauses: inEditorsPicker && inQuickOpen
Using Visual Studio Code what is the procedure to:
Remap a built in command's keyboard shortcut. For example, say, Open File (default is Ctrl+O, it's unlikely that anyone would actually change this, but the same process should probably apply for any built in shortcut).
Remap an extension command's keyboard shortcut, say the Bookmark extension's toggle-bookmark (default Ctrl+Alt+K)
IN 2015, this involved editing configuration JSON files, but I don't know which one, or how. In 2021 there's a new UI, how do I find it?
Click File -> Preferences -> Keyboard shortcuts. Use the tab that opens up to edit and find available key bindings and assign them.
Historical Note: In very early versions of visual studio code, you would Click File -> Preferences -> Keyboard shortcuts and you would get JSON like this keybindings.json:
// Place your key bindings in this file to overwrite the defaults
[
{ "key": "ctrl+o", "command": "workbench.action.files.openFile" },
{ "key": "ctrl+alt+k", "command": "bookmarks.toggle",
"when": "editorTextFocus" }
]
But now in 2021 versions, there is a proper GUI, which is great because the json editing method was error prone and hard to discover.
The json editor feature has been moved to a new icon:
If you want to change the advance settings of keyboard shortcut such as when then you can follow these steps:
Update:(Thanks #phdoerfler for pointing it out that icon has changed)
File->Preferences->Keyboard Shortcuts
Click on icon on top right corner that says "Open Keyboard Shortcuts(JSON)" to open JSON version and place the keybinding.
You can find this in Documentation here.
The way to open the JSON file changed yet again in a recent version.
You need to click the middle of the three buttons in the tab bar.
You only need to do that if the change you need isn't possible on the normal settings screen.
On Windows:
go to File -> Preferences -> Keyboard shortcuts,
or press Ctrl+K, then Ctrl+S,
or edit %UserProfile%\AppData\Roaming\Code\User\keybindings.json file
On Mac:
go to Code -> Preferences -> Keyboard shortcuts,
or press Cmd+K, then Cmd+S
Keep in mind you can type things like shift ctrl c in the Search input in Keyboard Shortcuts panel to find commands by their keybindings.
Here you can find documentation which among other stuff contains also information about what When conditions you can use.
The latest version of Visual Studio Code 1.11.0 provides a rich and easy keyboard shortcuts editing experience using a new Keyboard Shortcuts editor. Read more here on their website.
I will not repeat others answers! And if like me! You get to install a mapping extension!
My prefered is Visual studio keys map
And the question would have been how you select it! How you change it ! Can we install multiples! And select between them!
First here some useful links about key binding and shortcuts
https://code.visualstudio.com/docs/getstarted/keybindings
https://code.visualstudio.com/docs/getstarted/tips-and-tricks
And before any, know that you can get to the keymaps extension by using the bottom left settings button for settings context menu! As in the picture bellow:
or through file>Preferences>keymap
Then you have to install one of the keymaps
The thing to know is that it will take place and make the changes right away!
What if you install another?
The new one take over! Or some mix! I couldn't tell!
And you may have problems!
How you change from one to another?
Remove the old ! remove the new one! And install it again! That's the way that i found it works! Disabling and reenabling didn't work!
And better always let only one installed at a time!
Unfortunitly as by Now 2020-05-08 no options to select between keys mapping exist!
Undo a keymap
Just remove! You may need to restart the editor!
Restart the editor
Also note that if you uninstalled all and reinstalled the one you want! And changes didn't take place! Close the editor and reopen it! That's help!
I hope that's help and may be save you some searching time!
And sure in the future we will have better handling! As vscode is just keeping getting more awesome and awesome! So an option to select and better handling will is expected to be added! And we will wait for it!
FYI on mac the keybindings.json file sits there:
/Users/your_user_name/Library/Application Support/Code/User/keybindings.json
ctrl + shift + p
Type open keyboard shortcut in the search bar
It opens keyboard Shortcuts. Here you can customize shortcuts.
(For extra info follow from 4th point)
There at the top right corner click on open keyboard shortcuts (JSON) (Refer to the image)
There you can modify the key, command, and when. That is also cool.
I tried
{
"key": "ctrl+a",
"command": "workbench.action.terminal.selectAll",
"when": "terminalFocus && !isMac"
}
by this now I can select all in vscode terminal
On Windows: Ctrl + K, then S
On Mac: ⌘ + K then ⌘ + S
This opens Keyboard Shortcuts Editor. It's searchable/filterable by either shortcut name or the key combination itself (example: type "ctrl" to see all bindings to the CTRL key.)
Image:
vscode search keyword shortcuts panel
Open Key Shortcuts from Preferences -> Keyboard Shortcuts
Search for the action in search field
Right click on one of the results and select "Show same keybindings"
Delete the conflicting key binding!