Setup:
VSCode 1.50.1
MacOS High Sierra (10.13.6) - but I think this applies to any OS
Steps to Reproduce:
this is a quick simple one...
click on/hghlight/open a markdown file (.MD extension) in VSCode / from the Explorer tree hierarchy in the Left Nav Pane,
hit SHIFT-COMMAND-V per numerous instructional posts/tutorials - (you can also find the shortcut clearly labeled with that very same Shortcut Key-Combo:
if you RIGHT-CLICK on the file in question...
you will get a Context Menu with several options, include Markdown Preview
hitting the stated key combo of SHIFT-COMMAND-V does nothing,i.e.:
no observable effect in current window or tab
does not open any other tabs
does not render markdown
BEFORE YOU DO ANYTHING:
--
This may seem STUPID/OBVIOUS to most of you... I think I was still asleep when I first tried this... so:
make sure that your cursor is ACTIVE in your .MD markdown document, and NOT active on the filename in the Explorer
Tree in the left-hand Nav
apparently, in VSCode this shortcut SHIFT-COMMAND-V only works when you are ACTIVELY EDITING the file.
using the mouse on the RIGHT-CLICK context menu works fine
even if the .MD file isn't open AT ALL / in ANY EDITOR
even if you're actually actively editing A DIFFERENT FILE, if you hover over the filename in the Explorer/File-Folder Hierarchy,
RIGHT-CLICK and launch Mark Preview, it will work.
Quick Solution:
You most likely have a VSCode "Extension" installed and enabled within VSCode that is blocking the default VSCode shortcuts
in my case, this was Atom Keymap Extension (Here's link to extension in VS Marketplace)
IN VSCode, go to Extensions, find (you can search in the search bar at the top of the Extensions list/Nav Pane) Atom Keymap and UNINSTALL IT
alternately, you can just simplt DISABLE IT if you prefer to use it another time.
restart VSCode
SHIFT-COMMAND-V shortcut SHOULD BE WORKING NOW!
Troubleshooting:
Key Combo not recognized in VSCode (at least in VSCode, see#2 if blocked elsewhere)
If you look at the very bottom-middle/bottom-right of the VSCode window, you will notice the Status Bar (by default the whole bar is bright blue with white text)..
the status bar has several different sections, symbols, and text messages...
you will notice it changes/will indicate when you press a VALID Key-Combo... and that SHIFT-COMMAND-V literally does not result in ANY message on the status bar
But hitting COMMAND-V for instance is reflected in a real-time corresponding message in the status bar telling you that you DID press COMMAND-V
It appears NOT for any Key-Combo that includes SHIFT isn't recognized
confirm it's a VSCode thing only
go to your MacOS System Preferences > Keyboard > Shortcuts > look through each category of shortcuts - you should NOT SEE a key mapping for SHIFT-COMMAND-V
Related
Usually in Visual Studio Code, if I want to delete or modify a certain word from my file, I can highlight one of the words and then continuously press CTRL+D to highlight the rest of that same word in the file. But, in CLion, I am unable to find the equivalent shortcut.
I've Googled and searched here on StackOverflow but no luck. Maybe this shortcut doesn't exist in CLion? Can anyone confirm?
EDIT: It's also known as "Select next occurence" in other JetBrains products.
EDIT: The answer is ALT+J
it is alt+j in all of jetbrains products
So I just want to hit on a couple of options that you have, because I work with both CLion & VSCode as well, and needed the same exact keybinding in CLion.
KEYBINDING FUNCTIONALITY SEMANTICS
Unfortunately, it appears that no one cares about standardizing semantics when it comes to editor functionality/features, and keybindings. It can make moving from one editor to the next difficult, and flat out something many people just would rather not have to do.
Please Note:
_I am no expert on JetBrains IDE's, I am somewhat of an expert with VSCode though. I say this because, IDK how much JetBrains IDE's vary from one to the next, however, from having CLion, IntelliJ, and Access to Ryder I can tell you that in the standard IDE's the keymappings seem near Identical, but in Ryder, the keybindings are totally different.
DEV ENVIRONMENT
BOUND-KEYS (dev env's default)
SEMANTICS
CLion
ALT+J
"Add Selection for Next Occurrence"
Visual Studio Code
CTRL+D
"editor.action.addSelectionToNextFindMatch"
Visual Studio 2022 (IDE)
SHIFT+ALT+.
"Edit.insertNextMatchingCaret"
the The correct semantics for referring to the functionality you seek in CLion is contingent on the environment that its being implemented in. The following demonstrates how to correctly reference it in both JetBrains & Visual Studio Environments:
Add Selection To Next Find Match Ctrl+D editor.action.addSelectionToNextFindMatch
Once you know the semantics of the functionality that you want to customize, you no longer have to resort to using any editors default key mapping. You asked about, CLion, so I will demonstrate, in an image (or screenshot) below, how you can change the keybinding to be anything you want it to be.
To get to the window you see in the photo navigate by following the steps below.
Starting from the text editor, find the word 'FILE' on the 'MENUBAR' located at the very top of your screen.
Click on 'FILE' to drop open the 'FILE MENU'.
Scan through the __FILE MENU'_s ITEMS, until you see the selectable ITEM named 'SETTINGS' (it will have a wrench icon next to it).
4 Select 'SETTINGS' by left-clicking it, and you'll open the 'SETTINGS MENU' open.
Another 'LIST' will appear on the left side. There will be 'BOLD ITEMS' and regular weighted SUB ITEMS. Find the 'BOLD ITEM' that reads 'KEYMAP'.
Select 'KEYMAP'.
The image above shows the view in my IDE of the keymap menu. You can see a red arrow, as well as a green arrow, in the image.
GREEN ARROW
The green arrow shows where you can change the entire Keymap, as you can see in the image, mine is set to VSCode, and as far as I can tell, every keybinding is the same as in VSCode. You do have to download the VSCode keymap plugin though.
RED ARROW
The red arrow shows where the "Bound Keys" are listed. Right click on the keybinding and you'll see a menu that reads
Add Mouse Shortcut
Add Keyboard Shortcut
Add Abbreviation
"it may also have options for removing keybindings and mouse shortcuts, it all depends on how the keybinding you click on is configured"
To set the keybinding select Add Keyboard shortcut, and set it to what ever you want.
Sometimes when closing vscode, or a tab therein, I get a dialogue asking "Do you want to save the changes you made to filename?" However, the unsaved edits are actually from a previous session that was closed without such a query, probably when turning off the computer, so I can't remember if it was meaningful edits, or maybe just an accidental key-press, like a shortcut gone wrong; and doing undo to revisit the last edits doesn't work either.
My question: How can I see the diff between the saved version of a file, and the version in the editor window? I think it would be nicest just to have a "show diff" option in the dialogue, but for now I'm also happy with a command line diff command.
I'm using ubuntu 20.04.
I'm using VSCode version 1.52.1 on MacOS and I had a similar problem that may not be the same problem, but I'm guessing it will work for you as well.
When you're in the Explorer view, in the upper left part of Explorer you have your "Open Editors." If that shows a dot to the left indicating that the buffer has changes in it, you can right click the file name and select "Compare with Saved." This will open another buffer to the side that will show you any unsaved changes.
To get rid of that window (it took me a bit to figure this out I'm sorry to say!), you can click the 'X' to the left of the extra buffer in "Open Editors."
Hope this works for you!
A few bright notes for the keyboard players out there:
The command you are asking about has a default shortcut. Unless you've applied a keyboard map extension, the Ctrl+Kd arpeggio opens the very same diff view between the active and saved versions of the current file. The default shortcut to close an editor tab (be it the diff or a file or anything at all) is Ctrl+W.
The command, like any command in VSCode, is also accessible via the Ctrl+Shift+P command dropdown (on Linux, F1 opens it too). Start typing e.g. compa sav (it saves your keyboard wear and tear to shorten words to a prefix which is unambiguous enough), and the list will shrink dynamically to just a few commands. Yours is File: Compare Active File with Saved. When it's close to the top enough, navigate the list of commands with the down arrow and execute it with Enter. As a bonus, you may click on the little gear to the right of the command currently highlighted in the list and redefine its shortcut, if you use it very often and prefer a chord shortcut to the default arpeggio one. Sorry, there does not seem to be a shortcut in lieu of the gear click. If there is, please let me know!
But if you really, really want to right-click on the filename in the Open Editors view of the Explorer sidebar, you can open that view directly with, you guessed it, a shortcut: Ctrl+Ke. And if you change your mind on a dime right at this moment, or realize that you in fact never had a mouse to do the right-click in the first place, use Shift+F10 to drop down the "right-click menu", properly called the context menu, which you navigate with arrows and execute with Enter (that's kinda a common theme, as you probably noticed). This works mostly anywhere the right-click does.
While in the Open Editors view, to switch to an editor file tab, move the selection to the desired file. Press Space to bring the file into view but stay in the Open Editors view, or Enter to bring the file into view and shift the keyboard focus to it. Pressing Ctrl+Shift+E brings focus back to the editor from any view in the Explorer sidebar. The same shortcut moves focus to the Explorer sidebar from the editor.
Happy ♬ k'boarding ♬!
ctrl+shift+P (or command+shift+P on mac) and fuzzy search for "compare changes with saved files"
I'm using VS Code on Mac and I was curious about one component.
Every time I open a new python file, this component will show up on the top right of the current window? But I can't find the name of it.
That's not just "one component", but actually multiple buttons added to the editor actions toolbar from multiple extensions installed on your VS Code.
In order from left to right:
Open Changes (built-in with VS Code as part of their Version Control functions)
Run Python File in Terminal (added by Microsoft's own Python extension)
Open Changes in previous revision (added by the GitLens extension)
Show Revision Details (added by the GitLens extension)
Open Changes in next revision (added by the GitLens extension)
Toggle File Blame Annotations (added by the GitLens extension)
Split Editor (built-in with VS Code)
For GitLens, they are automatically added when it detects the currently opened file is part of a git repository. You can configure them by accessing the command palette (CMD+Shift+P on a Mac), then entering "GitLens: Open Settings". Find the "Menus & Toolbars" section:
For example, if you want to remove buttons 3., 4., and 5., uncheck "Add commands to the editor group toolbar" > "Add comparison commands". Then reload VS Code. You can configure all the other settings there.
For the green Play button, it automatically appears when you the currently active file is a Python file. AFAIK, there is no way to configure or hide/remove it other than disabling the Python extension completely (which you certainly don't want to do). There are requests on VS Code's Github page to hide it, like this: Add setting to disable icon for "Run Python File In Terminal".
For the "Open Changes" and "Split Editor" buttons, AFAIK there is no built-in way to hide/remove them. You can only control the behavior from the VS Code settings:
As mentioned in the comments, there is a feature request for VS Code to Allow hiding the buttons in the tab bar line and in the panel title bar, which includes the "Open Changes" and "Split Editor" buttons. There are users who provided workarounds at hiding the buttons using extensions. You may want to follow that thread and/or try out some of those extensions.
I'm wondering if there is a shortcut for VS Code that highlights in solution explorer tree current opened file. Like we have in Visual Studio:
Alt + Shift + L
Couldn't live with no complete answer, so figured out the following:
Without a direct keyboard shortcut:
Open the command palette via Cmd-Shift-P (or Cmd+P then >) and type Files: Reveal Active File in Side Bar.
This reveals the active file in the side bar similar to Visual Studio's Alt+Shift+L
Then, take the above and map a keyboard shortcut to it:
Open keyboard shortcut preferences file via Cmd-Shift-P followed by Preferences: Open Keyboard Preferences File.
Add in the following (taking Visual Studio's lead, I've personally mapped it to Alt+Shift+L, but map to what you want).
// Place your key bindings in this file to overwrite the defaults
[
{
"key": "shift+alt+l",
"command": "workbench.files.action.showActiveFileInExplorer",
},
]
Note that it's not as good as Visual Studio, Atom, etc. in that you can't then navigate with arrow keys in the tree (arrow keys navigate the active file contents), but I guess I'll eventually figure out how to do that.
#Tomoyuki Aota points out that you can do the following to navigate with arrow keys:
After Files: Reveal Active File in Side Bar, press Ctrl+Shift+E (Show
Explorer). After that, I can navigate the files in the explorer by the
arrow keys.
I don't think there's a command for that, but there is a shortcut to enable/disable revealing the current file as you open it:
"explorer.autoReveal": true
Try this:
Together with #Rob's correct answer:
"explorer.autoReveal": true
then Ctrl-Shift-E (Show explorer) focuses that file in the explorer and the arrow keys will navigate up/down/left/right like any list. This works even if the explorer is closed prior to the Ctrl-Shift-E.
Ctrl-Shift-E has the added bonus in that it will toggle focus between the highlighted file and its editor as well.
For mac, use Cmd-Shift-E
Right-click the file tab (not necessarily current one) and click "Reveal in Side Bar".
I was able to achieve this by customizing the workbench.files.action.focusFilesExplorer command with keybinding Alt + shift + L
Open the Keyboard Shortcuts ctrl + K + shift + S
search for focusFilesExplorer command & customize
Provide your keybindings that you are used to - I set mine to Alt + Shift + L
F1 then type "reveal" also works from in VS Code, at least for me.
It looks like the actual version of VS Code offers a command for this feature now.
In the settings, type revealInExplorer in the search bar to find the command. There is no default keybinding, so just put your own. Works like a charm!
Download the open in browser extension, that's it.
Right click > Open in primary/secondary browser function appears, and the ALT+B / ALT+SHIFT+B shortcuts become available.
Had a similar case and ended up here looking for help.
I opened a file in "preview" mode after clicking a link in a .md file and wanted to know where this opened file was located in the project.
I found this button in the upper right corner of VS Code which was exactly what I wanted:
It's called "show source"
Also check "Explorer: Auto Reveal Exclude" patterns in VS Code settings. Files that fit any of the patterns will not be auto revealed in the Explorer tree.
I'm new to RubyMine 7 on Mac.
I used to use Sublime Text 3 and I love RubyMine so far except its lack of file previewing.
In Sublime Text, when clicking a file in the sidebar (file explorer), the selected file content shows in an editor tab for temporary viewing.
If I select another file, then the same tab changes to the content of the newly selected file.
I've been searching for this preference setting in RubyMine, or in a plugin, but I've had no luck.
A similar feature is "Autoscroll to source" but this feature opens files rather than previewing them.
If anyone knows how to do Sublime Text-like file content previewing in RubyMine, I'd appreciate it.
RubyMine doesn't have a feature exactly like Sublime Text file previewing.
The Quick Definition action can sometimes meet the same need. When invoked on a file, it opens a popup with the file's contents. You can invoke it on a file in the Project or Find pane and probably other panes, dialogs, popups, etc. that list files. (You can also invoke it in an editor on an identifier such as a class, module, or variable; it will show the code that defines the identifier.) Invoke Quick Definition with ⌥-space or ⌘Y in the Mac OS X 10.5+ keymap; use ^⇧I on Windows or check Preferences → Keymap for other keymaps, or use ⇧⌘A qd ⏎. Hit Escape or click outside the popup to close it.
When you invoke Quick Definition on a file in the Project pane and navigate to other files in that pane (with down and up arrows to move between files, and right and left arrows or Enter to open and close directories), the Quick Definition popup will stay open and update to the currently selected file, which is relatively close to Sublime Text file previewing. You can also hit Enter to open a file, F4 to open a file and move focus to the editor, edit the file, ⌘1 to jump back to the Project pane, etc., all with the Quick Definition popup still open, until you choose to close it.
If that isn't close enough, there are two feature requests for Sublime Text-like file previewing in JetBrains IDEs which you can vote for:
Preview currently selected file in project window
File Preview features from Sublime