After upgrading to TYPO3 v11.5, I get this error in my extensions backend module:
1578950324 RuntimeException
The given page record is invalid. Missing uid.
So I digged a little deeper and found out that this has to do with using the f:be.tableList ViewHelper.
In my BE module I use the ViewHelper like this:
<f:be.tableList
tableName="tx_myext_domain_model_mymodel"
storagePid="1"
fieldList="{0: 'column1', 1: 'column_2'}"
sortField="column1"
enableControlPanels="true"
clickTitleMode="edit" />
Since I register my backend module with 'navigationComponentId' => '', (as mentioned in the documentation) I get this error. But the page tree or something else isn't helpful at this point, so I don't want to show them.
(If I show the page tree with 'navigationComponentId' => 'TYPO3/CMS/Backend/PageTree/PageTreeElement', this error disappears)
It turned out that the ViewHelper checks if the user has access rights via checking if the PID is in the mountPoint. I think this is important and not a bug. Fixing that issue could be hard, because how to check the mountPoint permissions if I don't know the PID. (maybe in the ViewHelper: check against the storagePid?)
But if you disable the page tree, there is no PID to check against.
So I also found out, the current PID is fetched while TYPO3\CMS\Core\Utility\GeneralUtility looks for a given id like this:
$value = $_POST[$var] ?? $_GET[$var] ?? null;
I didn't found a way to set the pid in my Extbase Controller, so I did it easily this way in my listAction:
if( TYPO3_MODE == 'BE' ) {
// if is in the BE-module, set PID to prevent customer authentication check error
$_POST['id'] = 1;
}
(In this case, I set the PID to my rootpage.)
If someone has a better solution, don't hesitate to post it to this question.
Have you disabled the page tree for the backend module? If yes - that's the problem! The settings inheritNavigationComponentFromMainModule => false leads to the error.
Related
I get a project that used TYPO3 CMS, the task is quite simple, adding cookie usage notice on the header part of the website.
I never working on TYPO3 before, but already reading the documentation. Somehow I can't figure out which file to edit. even the documentation tutorial and file structure is different than the project I handle.
I don't have any project documentation for the project either, and I don't want to ask you to do my task, but I'm blank at the moment and don't know where to find the respective file needed.
Any suggestion or clue how to handle the issue?
my index.php on root folder look like this:
if (defined('E_DEPRECATED')) {
error_reporting(E_ALL ^ E_NOTICE ^ E_DEPRECATED);
} else {
error_reporting(E_ALL ^ E_NOTICE);
}
// ******************
// Constants defined
// ******************
define('PATH_thisScript', str_replace('//', '/', str_replace('\\', '/',
(PHP_SAPI == 'fpm-fcgi' || PHP_SAPI == 'cgi' || PHP_SAPI == 'isapi' || PHP_SAPI == 'cgi-fcgi') &&
($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) ?
($_SERVER['ORIG_PATH_TRANSLATED'] ? $_SERVER['ORIG_PATH_TRANSLATED'] : $_SERVER['PATH_TRANSLATED']) :
($_SERVER['ORIG_SCRIPT_FILENAME'] ? $_SERVER['ORIG_SCRIPT_FILENAME'] : $_SERVER['SCRIPT_FILENAME']))));
define('PATH_site', dirname(PATH_thisScript).'/');
if (#is_dir(PATH_site.'typo3/sysext/cms/tslib/')) {
define('PATH_tslib', PATH_site.'typo3/sysext/cms/tslib/');
} elseif (#is_dir(PATH_site.'tslib/')) {
define('PATH_tslib', PATH_site.'tslib/');
} else {
// define path to tslib/ here:
$configured_tslib_path = '';
// example:
// $configured_tslib_path = '/var/www/mysite/typo3/sysext/cms/tslib/';
define('PATH_tslib', $configured_tslib_path);
}
if (PATH_tslib=='') {
die('Cannot find tslib/. Please set path by defining $configured_tslib_path in ' . htmlspecialchars(basename(PATH_thisScript)) . '.');
}
// ******************
// include TSFE
// ******************
require (PATH_tslib.'index_ts.php');
edit: adding screenshot of the interface suggested by #Riccardo (typo3 ver 4.4.4)
Which version of TYPO3 are you running? As Bernd wrote, it is difficult to help you without further information.... I'll try to explain the first passages where you could gather some infos.
1) Access TYPO3 backend with a user with administrative privileges
2) Try to identify the main TypoScript template with this procedure:
click on template (1)
click on the "zero" page with the TYPO3 symbol (2)
you should see on the right a list of the TypoScript templates (3),
click on the one that is marked as "is Root"
2) After that, click on the first dropdown on the right area (with the "info/modify" item and select "TypoScript Object Browser" (a.k.a. TSOB)
3) After you have done that, you should see a "tree" that represents the TypoScript configuration;
be sure to have "setup" selected (1)
search for the object that builds your page, which should most likely be page = PAGE (2)
[answer edited]
I'm afraid I'll have to ask for a survey supplement
Can you identify in which part of the various objects the header of your site is rendered? My suspects would be focused on the [home2] or the [outer_frameset] object;
Hoping that they will contain the usual array with something like:
home2.10 = something
I think that the quickiest (and dirtiest) way to append something before the whole page would be something like
home2.1 = TEXT
home2.1.value = <div>whatever your message would be </div>
I don't know if you need something more complex than that...
Said that, I admit I never worked with frame inside TYPO3 and I think that the last time I did something with frames was...uh... maybe 9 years ago.
Don't change that index.php!!
As it is part of the core which gets overwritten on an update of TYPO3.
As there are very much options for configurating a page there can be no recipe matching all.
My best tip: get a TYPO3 profi to have a look into your installation so he can find which files are responsible for the page rendering and could include the cookie notice.
There also are some extensions which could render such a notice in your pages in a very easy way. But that all depends how your installation is configured. Nothing to say without further knowledge.
I'm working in Rails 4 and have gotten CanCan to work well with instructions from this issue, except for one use case that I think might be relatively common.
I have a Comment model, which has_many :comments, through: :replies for nested comments. All of this is working well, until I add load_and_authorize_resource to my comments controller. The problem seems to stem from a hidden field sending an optional :parent_comment_id attribute to my create action.
I've permitted this attribute via strong parameters:
def comment_params
params.require(:comment).permit(:content, :parent_comment_id, :post_id, :comment_id, :user_id)
end
So that I can create the association if a :parent_comment_id is included:
if comment_params[:parent_comment_id] != nil
Reply.create({:parent_comment_id => comment_params[:parent_comment_id], :comment_id => #comment.id})
end
But once I add load_and_authorize_resource, I get an unknown attribute error for :parent_comment_id. What am I missing?
Solution came to me in my sleep. Here's what I did to solve the problem:
The only reason comment_params wasn't normally having a problem on create, was because I was excluding the extra :parent_comment_id parameter, like this:
#comment = post.comment.create(comment_params.except(:parent_comment_id))
When CanCan used the comment_params method however, it did no such sanitation. Hence, the problem. It would have been messy to add that sanitation to CanCan on a per-controller basis, so I did what I should have done all along and instead of passing the :parent_comment_id inside :comment, I used hidden_field_tag to pass it outside of :comment and accessed it through plain, old params.
I hope this helps someone else who makes a similar mistake!
I'm fairly new to Zend and I think this question won't be so hard to answer.
I'd like to unset my entire session namespace (called 'Default'), and I've found a possible answer here, but when I use the following line of code Zend_Session::namespaceUnset('Default'); I get this error: Zend_Session is currently marked as read-only.
Hopefully someone can help me out.
If it is set to read-only, then you can remove the read-only, by called
$namespace->unlock();
Also, "Default" is the default namespace name. I always change this to something else. You can also check if the $namespace you are trying to use is locked by using:
$namespace->isLocked(). This will return a boolean true/false of the status of the namespace.
So... what you might have is this (from docs):
$userProfileNamespace = new Zend_Session_Namespace('userProfileNamespace');
// marking session as read only locked
$userProfileNamespace->lock();
// unlocking read-only lock
if ($userProfileNamespace->isLocked()) {
$userProfileNamespace->unLock();
}
I've just created an eID in Typo3. I can't figure out how to access the config data for my plugin from the Typo3 instance.
I've tried the code from the link but it doesn't want to work. I keep getting an exception "No TypoScript template found! " on the call " $TSFE->getConfigArray(); "
http://lists.typo3.org/pipermail/typo3-dev/2006-December/021392.html
Any ideas?
Thanks.
In eID mode, only a small part of the regular TYPO3 frontend is loaded. Unfortunately TypoScript is not loaded. To still access the TypoScript configuration you need manually load the components it needs to do so. Unfortunately this can be a bit of a pain in the butt. So in some cases it might be easier to just load a page containing a single plugin that doesn't contain anything else (without headers etc.).
If you do want to load the TypoScript templates yourself, you can try something like the following:
require_once(PATH_tslib.'class.tslib_fe.php');
require_once(PATH_t3lib.'class.t3lib_userauth.php' );
require_once(PATH_tslib.'class.tslib_feuserauth.php');
require_once(PATH_t3lib.'class.t3lib_cs.php');
require_once(PATH_tslib.'class.tslib_content.php') ;
require_once(PATH_t3lib.'class.t3lib_tstemplate.php');
require_once(PATH_t3lib.'class.t3lib_page.php');
$TSFEclassName = t3lib_div::makeInstanceClassName('tslib_fe');
$id = isset($HTTP_GET_VARS['id'])?$HTTP_GET_VARS['id']:0;
$GLOBALS['TSFE'] = new $TSFEclassName($TYPO3_CONF_VARS, $id, '0', 1, '','','','');
$GLOBALS['TSFE']->connectToMySQL();
$GLOBALS['TSFE']->initFEuser();
$GLOBALS['TSFE']->fetch_the_id();
$GLOBALS['TSFE']->getPageAndRootline();
$GLOBALS['TSFE']->initTemplate();
$GLOBALS['TSFE']->tmpl->getFileName_backPath = PATH_site;
$GLOBALS['TSFE']->forceTemplateParsing = 1;
$GLOBALS['TSFE']->getConfigArray();
$cObj = t3lib_div::makeInstance('tslib_cObj');
This initializes the TSFE and cObj but is also used to load and parse the TypoScript templates. You might need to make some modifications to (probably kick some things out)
The code came from one of the comments on the following blog post: http://sebastiaandejonge.com/blog/articles/2010/september/21/bringing-ajax-to-your-frontend-plugins/
Good luck!
I'm trying to use Class::DBI with a simple one parent -> may chidren relationships:
Data::Company->table('Companies');
Data::Company->columns(All => qw/CompanyId Name Url/);
Data::Company->has_many(offers => 'Data::Offer'=>'CompanyId'); # =>'CompanyId'
and
Data::Offer->table('Offers');
Data::Offer->columns(All => qw/OfferId CompanyId MonthlyPrice/);
Data::Offer->has_a(company => 'Data::Company'=>'CompanyId');
I try to add a new record:
my $company = Data::Company->insert({ Name => 'Test', Url => 'http://url' });
my $offer = $company->add_to_offers({ MonthlyPrice => 100 });
But I get:
Can't locate object method "add_to_offers" via package "Data::Company"
I looked at the classical Music::CD example, but I cannot figure out what I am doing wrong.
I agree with Manni, if your package declarations are in the same file, then you need to have the class with the has_a() relationship defined first. Otherwise, if they are in different source files, then the documentation states:
Class::DBI should usually be able to
do the right things, as long as all
classes inherit Class::DBI before
'use'ing any other classes.
As to the three-argument form, you are doing it properly. The third arg for has_many() is the column in the foreign class which is a foreign key to this class. That is, Offer has a CompanyId which points to Company's CompanyId.
Thank you
Well, the issue was actually not my code, but my set up. I realized that this morning after powering on my computer:
* Apache + mod_perl on the server
* SMB mount
When I made changes to several files, not all changes seems to be loaded by mod_perl. Restarting Apache solves the issue. I've actually seen this kind of issue in the past where the client and SMB server's time are out of sync.
The code above works fine with 1 file for each module.
Thank you
I really haven't got much experience with Class:DBI, but I'll give this a shot anyway:
The documentation states that: "the class with the has_a() must be defined earlier than the class with the has_many()".
I cannot find any reference to the way you are using has_a and has_many with three arguments which is always 'CompanyId' in your case.