While building my project, I get this error:
line 2: /usr/local/bin/carthage: No such file or directory. Command PhaseScriptExecution failed with a nonzero exit code
Tried so many methods to resolve this issue, including switching Xcode versions.
It's worth to mention that it only occurs on an M1 Mac device which I'm currently using, same project without changing any part of the configurations works on an Intel Mac.
The project is using Carthage, which is likely installed using Homebrew. On M1 Macs, Homebrew links its binaries into /opt/homebrew/bin while on Intel Macs, they are linked into /usr/local/bin.
This means that on an M1 Mac, Carthage is probably found at /opt/homebrew/bin/cartage.
Your build script should use something like $(which carthage) or simply carthage instead of relying on an absolute installation path.
I had a similar error. My issue was that I didn't have a ~/.bash_profile. Creating an empty file fixed the error
I have several problems after updating to flutter 2 someone can help me solve them, I list the log below
Flutter console error:
objc[88773]: Class AMSupportURLConnectionDelegate is implemented in both ??
(0x1f9b08188) and ?? (0x113d382b8). One of the two will be used. Which one is undefined.
objc[88773]: Class AMSupportURLSession is implemented in both ?? (0x1f9b081d8) and ??
(0x113d38308). One of the two will be used. Which one is undefined.
** BUILD FAILED **
Xcode's output:
↳
Command CompileSwift failed with a nonzero exit code
In file included from
/Users/user/.pub-cache/hosted/pub.dartlang.org/shared_preferences-0.4.3/ios/Classes/
SharedPreferencesPlugin.m:5:
/Users/user/.pub-cache/hosted/pub.dartlang.org/shared_preferences-0.4.3/ios/Classes/
SharedPreferencesPlugin.h:5:9: fatal error: 'Flutter/Flutter.h' file not found
#import <Flutter/Flutter.h>
^~~~~~~~~~~~~~~~~~~
1 error generated.
Command CompileSwift failed with a nonzero exit code
Command CompileSwift failed with a nonzero exit code
note: Using new build system
note: Building targets in parallel
note: Planning build
note: Analyzing workspace
note: Constructing build descriptionuser
I had the same issue. I saw the same error when I ran flutter build ios.
The error message was displayed red color on my VS code terminal, but it was kind of misleading. I found it was not the main issue.
The actual issue should be on the following error section.
So, please run flutter build ios --verbose and read the output carefully.
In my situation, there were other issues of the failure of flutter build ios. The issues were like forget to put in GoogleService-Info.plist or iOS target version is less than the requirement of flutter packages.
Never had a lot of problems until the time to buy Macbook Air M1. Just yesterday my app was build without any error in Xcode 12.4. I did not make any special changes and today build failed:
/Users/userName/Projects/MyApp/ios/Pods/OpenSSL-Universal/ios/lib/libcrypto.a(cryptlib.o), building for iOS Simulator, but linking in object file built for iOS, file '/Users/userName/Projects/MyApp/ios/Pods/OpenSSL-Universal/ios/lib/libcrypto.a' for architecture arm64clang: error: linker command failed with exit code 1 (use -v to see invocation)
Please can you help me, how to solve it?
Looks like a missing Arm64 simulator slice in the OpenSSL-Universal CocoaPods distribution.
Make sure that you're using the latest version with pod update and contact the OpenSSL-Universal if there's still an issue.
Updating from Xcode 10.0 beta 2 to Xcode 10.0 beta 3 I now get this error at build time for an iOS project:
sourcekit: [1:connection-event-handler:10499: 0.0000] Connection interruptsourcekit: [1:updateSemanticEditorDelay:10499: 0.0007] disabling semantic editor for 10 secondssourcekit: [1:pingService:10499: 0.0007] pinging servicesourcekitten: connection to SourceKitService restored!
Connection interrupted
Never call this for file that sourcekitd fails.: file File+Cache.swift, line 127
/Users/Coeur/Library/Developer/Xcode/DerivedData/My-App-eloayqptodupvfhbyegtkncnhcpu/Build/Intermediates.noindex/My-App.build/UAT-iphonesimulator/My-App-Debug.build/Script-379156A71D62F5C100574D04.sh: line 2: 34382 Abort trap: 6 "${PODS_ROOT}/SwiftLint/swiftlint"
Command PhaseScriptExecution failed with a nonzero exit code
Swift 4.1
CocoaPods 1.5.3
SwiftLint 0.26.0
Its because of Keychain Access.
Open Keychain Access
Right Click Login Tab
Lock Keychain Login
Right Click Login Tab again
Unlock Keychain Login
and problem solved :)
It seems to be an issue with the SwiftLint 0.26.0 script when using Xcode 10.0 beta 3 or newer.
Cause
It seems related to SwiftLint #2276, itself related to SourceKitten 0.21.0, fixed in SourceKitten 0.21.1 and SwiftLint Master.
Solution
Update to SwiftLint 0.27.0 or newer:
pod 'SwiftLint', '~> 0.27'
(and run pod update SwiftLint)
Some Framework or SDK require Code Signing.
I done code signing and resolved the problem for me.
The pod that I was using was not updated for Xcode 10, so the solution that worked for me was to remove Cocoapods from my project and then installed again (the project was created on Xcode 9).
To remove it, the easiest way is:
$ sudo gem install cocoapods-deintegrate cocoapods-clean
$ pod deintegrate
$ pod clean
After that, install the pods again.
I just restarted my Macbook and it worked.
For me adding arm64 architecture in "Build Setting -> valid architectures" resolved the issue.
I had an authentication process (outside of Xcode) running in the background which seemed to be causing this issue for me. I had the keychain dialog up asking for my password. Solution was to restart the machine.
Solution worked for me
I deleted all pod generated files and folders as listed below
Podfile.lock
Pods folder
ProjectName.xcworkspace
Again install pod for this project.
Now open .xcworkspace. Build and run...
It may cause the iOS 13 version. My error is to look at below
Assignment/Pods-Assignment-frameworks.sh: eval: line 131: unexpected EOF while looking for matching `''
Command PhaseScriptExecution failed with a nonzero exit code
Pods -> Targets Support Files -> Pods-AppName -> Pods-AppName-frameworks.sh.
Just commented particular line 131
# eval "$code_sign_cmd"
then clean and run
For me it was an issue with swiftlint. This happens when ever there are serious errors, for example forced unwrapping that swift lint validates.
The actual SwiftLint errors are not shown. Instead this “Command PhaseScriptExecution failed with a nonzero exit code” error is shown. After a bit struggle, I figured out that if your project's directory name or any its hierarchy folders have an apostrophe 's , then actual swiftlint errors or warnings are not shown even after including the runscript for it.
So I just had to rename my folders.
For example:
User -> Dave's Projects -> Git -> ProjectName
should be changed to
User -> Daves Projects -> Git -> ProjectName
This will show you errors or warnings. You can then fix the errors and hopefully the concerned error will also be fixed.
This issue resolves for me when I wait and let the project complete indexing before I do anything!
Restarting Xcode 10.1 fixed it for me; arose while updating Cocoapods ('RxSwift').
If the directory where your project is has blank spaces that problem occurs
To solve that problem add double quotes(""). For example:
"$(SRCROOT)/my framework/path"
In my case, Apple development certificate got expires.
To verify open Keychain -> My certificates -> check developer certificate is valid or not, If certificate is not valid then follow the below steps.
Open your apple developer account and create a new development certificate
Download and add it in your keychain.
Go to profiles and open your existing development profile and add the newly created certificate.
Download the fresh profile and install it.
Hope this helps you too.
I had this issue on my ionic4 app after I have used cocoapods. My issue was that in Targets->Build Phases->Embed Pods Frameworks, I had a wrong path to Pods-MyApp-frameworks.sh script correcting that path solved the issue for me.
Its because most of the time $PODS_ROOT variable doesn't set after installing pods
For me, there seems to be an issue with the swiftlint script. It was initially this, Which was what was in the doc as of the time of installation
else
echo "warning: SwiftLint not installed, download from https://github.com/realm/SwiftLint"
fi
I resolve the issue by modifying it to
if swiftlint
then
echo "swiftlint installed"
else
echo "warning: SwiftLint not installed, download from https://github.com/realm/SwiftLint"
fi
Not sure, this may be due to my XCode version(10.3)
I resolve the issue by rewrite the .sh file.
Xcode 10 with Swift 3.
1.rename problem.sh file and command+A then command+C.
2.vi *problem*.sh and command+V.
3.:wq! to save the new file.
Then everything will be ok.
If not ok, chmod a+x *problem*.sh and try again.
Only the following helped me.
Delete Podfile.lock
run pod install
Optional - update SwiftLint version
I had a new Macbook and got this error when trying to archive. I forgot to install cocopods in the new machine, so I did, then restarted the computer and restarted Xcode and it worked.
If you're getting
dyld: Library not loaded: /usr/local/opt/readline/lib/libreadline.7.dylib
and a red
Command PhaseScriptExecution failed with a nonzero exit code
You should install the specific version of libreadline that you need
brew install readline
brew list --versions readline
brew switch readline 0.0.0
I installed Cocoapods. I used GoogleMaps. When I build workspace on my device i get this error: Error
I also tried all this instructions: Linker command failed with exit code 1 after installing CocoaPods and firebase pod
P.S. Building on simulator works
Probably you've already check if you've open the .xcworkspace created in your project folder.(NOT .xcodeproj)
If still doesn't work try
Go to Project Settings.
Go to Build Settings.
Change BUILD ACTIVE
ARCHITECTURE ONLY to NO.