How do I edit the design (html, img, css) of the page hosted at [myapp].app.link? I have configured this in my Branch account configuration as the "Link Domain" for my app redirect.
This Branch.io help page seems to imply that the page is customizable: https://branch.io/what-is-applink/
As per Branch support: The page being referred to is called a Deepview. A Deepview is a mobile web splash page, hosted by Branch, that gives a preview of the in-app content behind a given Branch link.
For more information on the same, you can go through the documentation below:
https://help.branch.io/using-branch/docs/deepviews#overview
You can navigate to your Deepview setting from the Configuration page and then navigate to the Deepviews tab. You can not edit the existing Deepviews, however, you can create your own custom Deepview. Do go through the following documentation for a step by step guide:
https://help.branch.io/using-branch/docs/deepviews#1-enable-default-deepviews-templates
https://help.branch.io/using-branch/docs/deepviews#1a-create-a-custom-deepview-template
Related
I created a Flutter web app and published it via my personal github.io repository site. This root site loads and works as expected.
I also created a simple HTML/CSS/JavaScript website and pushed it to a respository on my github. I published that site, as well, and it loads as expected. (From the repository home page I went to Settings, Pages, and enabled the respository as a GitHub Pages site by selecting its master branch for the Source setting.)
In other words, I can publish a flutter web app to GitHub Pages & I can publish more than one web site to GitHub Pages.
But when I try to publish a second Flutter web app, following the same procedures as for the simple HTML site, and even get the message from GitHub (with a green check mark) telling me my site's published, all that's displayed is my root github.io site. When I enter the URL I see the correct page title briefly flicker, but then root site immediately loads. (I have more or less the same issue as described in this post.)
If you need to host a Flutter web app at a non-root location, you need to follow the instructions for doing so:
Update the <base href="/"> tag in web/index.html to the path where
your app is hosted. For example, to host your Flutter app at
myapp.dev/flutter_app, change this tag to <base href="/flutter_app/">.
You need to change your base to <base href="/repo_name">. If you did not already have a base tag, add it.
You might also be able to just remove the base tag if you had it set to the default of <base href="/">.
I have a Github repository with an associated Github page (say, github.com/user/mypage), and I would like to include the URL to the Github page (say, user.github.io/mypage) in the About section of the repository. When I go to "Edit repository details", the Github page already shows up in the "Website" field and cannot be changed (which is fine) but it is not displayed in the About section. I've tried this with multiple repositories with associated Github pages, and all show the same behavior. Am I overlooking something blatantly obvious, or is it just not possible to include the URL here?
I tried for a week to link my GitHub Page to my GitHub repository. I just figured out how to do it and then found this post. I thought I would go ahead and post my answer. Doing so might be helpful by making this question more visible in future internet search results.
Click on the gear icon in the upper-right of your GitHub repository to the right of the word "About" (shown in the red circle below):
Paste the URL of your GitHub Page into the Website bar in the window that pops up. This Website bar will already contain text that is grayed-out and might match the URL of your actual GitHub Page. That grayed-out text is inactive. Go ahead and paste in the URL of your GitHub Page anyway. Then click Save changes. You are done. Your GitHub Page should now be linked to your GitHub repository.
I am reading thru AEM WCM and had a question that once after creating page in lower environments and publish where to check that look and feel? Is there any url to check? or will check in AEM only?
can anyone give example format url?
TKs
Have a look at the Adobe Authroing documentation, understand the concept and architecture of the AEM. As AEM is on the REST based concept implementation your page content path will be the page url (if you don't have any sling internal redirects or Dispatcher level url hiding implementations).
Just to explain you taking an geometrixx website OOTB example.
Working at author end in local instance at port 4502:
Example if you have created a test page under /content/geometrixx/en/toolbar/
the test page url will be http://localhost:4502/cf#/content/geometrixx/en/toolbar/testpage.html
preview mode can be tested appending wcmmode=disabled at the end of your url as shown below
http://localhost:4502/cf#/content/geometrixx/en/toolbar/testpage.html?wcmmode=disabled
from side kick preview option
If you have published the page (assuming your publish instance is
running at 4503 on local)
your page path will be http://localhost:4503/content/geometrixx/en/toolbar/testpage.html
If you are using touch UI then you can see the preview mode by:
Edit link: http://localhost:4502/editor.html/content/geometrixx/en/toolbar/testpage.html
Preview Link:
http://localhost:4502/content/geometrixx/en/toolbar/testpage.html?wcmmode=disabled
You should have a Replication Agent and configuration setup there to publish the pages. There is a default agent comes with AEM where you can publish the changes from author to publish environment.
We have moved our codebase and wiki to github. However the google code version still shows up really high on Google. Is there any way to do an auto redirect to github when people land on the Google code version?
I'm not sure how long this option has been available (it may be related to Google announcing they're shutting down Google Code), but you can now set a "project moved" flag which will provide all visitors to your Google Code project with a link to any other site, including GitHub.
Note: It doesn't appear that you can fully revert this setting, at least not at the time of my writing this, so be sure you really don't want to access anything from the Google Code project before setting it.
You can mark your project as moved on your admin page. If you change your mind, you can clear the setting by clicking the publish button.
Setting the "Project Moved" Flag
Once a project has been successfully exported to GitHub, you will want to update your project's homepage on Google Code to avoid confusion.
Some project owners simply update their project homepage's text to indicate it has moved to GitHub. For example subtext or bwapi.
Another option is to set the Google Code "project moved" flag. When set, attempts to access the project will take users to an interstitial page indicating the new project location. In the future, the page will automatically redirect to well-known project hosting services such as github.com.
To set the "project moved" flag, navigate to your project's advanced admin page, at https://code.google.com/p//adminAdvanced.
Once there, enter the new project home page URL under "project moved". For example: https://github.com/google/kythe. Finally click the "Project Moved" button.
If you need to "un-move" a project, you can go back to the /adminAdvanced page at a later time and click "Publish". This will restore your project to its original state, before the move.
Whats the best way to develop a tab on facebook in a facebook page with content inside it? Would it just be html within that tab?
Easiest way is to install a 3rd party iframe App on your Facebook Page. You can find these Apps by searching for "iframe" in Facebook's search. Once you have one of these Apps installed, you can customize the HTML/CSS/JS of the iframe, which will then be reflected on you Page Tab. Alternatively, you could create your own Facebook App and install it as an iframe in your Facebook Page. This will achieve the same thing, and may give you more control, but you will have to host the html/css/js files yourself and it will be more work.
I recently have the same need.
To just place a facebook tab containing just a static html with text and image.
Here are the steps. It can be quite a nightmare to review the documentation of Facebook since it is always in change.
In the home page, click in the settings button. There is a link "Create application". You have to be sure to be in the Facebook development section
In the Create Application home page. In the upper menu there is the button "Applications". Here will be listed all your applications. If this is the first time, again the button "Create a new app"
3.Enter the information requested. Name of the application, an identifier (I prefer the same display name without spaces) and choose a category.
As a security step, a captcha is shown. Just fill with the characters in the screen.
Since your tab is an html. You have to host this file in your own server in order to have a path. The first tricky thing here is to convert this file into a php, asp, or similar extension. since Facebook uses GET or POST protocol to send information. You have to ensure that your file understands this requests. So, your server must accept the corresponding programming language. Even if your tab doesn't have any real code.
The configuration of your app is shown in screen. In the left menu, the option "configuration" displays the options to activate your tab.
click "Add plattform" button and select Facebook tab
fill the information required with the corresponding URLs. Note: Facebook always requires secured URLs so make sure that your server or hosting service has the SSL certificate validated.
Upload the image of your tab to be shown in the home of your profile in your tab section.
ok, so far we are good. Now. This was a long search. There is no longer the "Add to my webpage" link anywhere. So use this link to access to that hidden link. here Basically you enter the facebook app id and the URL of the hosted file.
Then you select the facebook page where you want to link this tab. And that's it!
note: the alternative to the link is this: (https://www.facebook.com/dialog/pagetab?app_id=YOUR_APP_ID&next=YOUR_URL )
Hope this helps. It was a waste of time when I have to search for the details so I want to share this.