Is it possible to see which extensions I have recently removed in VsCode?
I removed a whole bunch of extensions today, and discovered that I removed one which I need for expo to run, but I do not know which one it is.
Any help would be appreciated.
Related
Overnight, any help I had for Unity3D in VSCode, i.e. intellisense, disappeared. And I get the sense, no pun intended, that I'm not the only one who's afflicted.
I've tried updating and reinstalling what I assumed VSCode needed to make Unity3D intellisense work. And have checked and re-checked settings, reinstalled VSCode package, in Unity3D.
I've worked through a few tutorials that claimed to address the issue.
What else does VSCode depend on to make this relationship work?
Thanks! Here's to hoping you've fixed this and your life has gotten easier!
Try going to Edit > Preferences > External Tools > Regenerate Project Files (This is because of a bug where the VS Code extension doesn't generate the project files correctly the first time, you can check it out here).
You'll need to be using the VS Code Editor Extension 1.2.0 (you can check which version you're using in the package manager) or later for that option to appear. Also if for whatever reason there are 2 .sln files in your project folder (I've had that happen before, though it's less likely), that also causes problems.
Ok. First, thanks to Lightning_A and Charleh!
The resolution to my specific circumstance was to install the VSCode extension "Unity Snippets Modified" https://github.com/with-heart/vscode-unity-snippets
I had been using https://github.com/kleber-swf/vscode-unity-code-snippets.
Perhaps it's just a matter of Kleber's extension, which is/was great, was broken upon updating Unity to 2020? I dunno and don't have the time to look into it, unfortunately.
Hopefully, my question, the answers I received, and my subsequent resolution saves others from the rabbit-hole I went down.
Again, thanks everyone!
I need to figure out how to turn off emphasized items in Visual Studio Code
This might sound like a strange requirement, but in my workflow vscode functions as less an IDE than a cross-platform ViM-esque frontend with lots of remote development tools built-in.
Due to this use case, I don't need or want the linting features to show up in the file browser. How might I accomplish this?
Attempts to solve the problem
I've run out of search terms here and cannot find an answer.
Searches including terms in this question's title yielded little
SO-specific search queries also yielded little
This seems to be somewhat related, at least as a representation of the "feature" I'm referencing: VS code containes emphasized items but no error
VSCode "preferences" do not appear to show what I'm looking for, likely an issue with me not searching for the right variable name.
In my experience with VSCode it has been wonderfully customize-able, so I'm guessing there's a setting somewhere ready to be modified to accomplish this. Any help much appreciated, thanks!
My use case was a bit different: after viewing some files in a git submodule those files became linted, and errors and warnings cluttered up my VS Code Explorer file browser window on files I had no intention of ever handling. I basically wanted a way to clear out those lint warnings, and found it here. The solution is to reload the window:
CtrlShiftP on Windows/Linux, ⌘ShiftP on Mac -- then select "Developer: Reload Window"
One by-product of reloading the window is that it clears out those unwanted warnings (at least until the next time I visit the file). It also has the effect of clearing out warnings on files that I would normally want to see, of course, but chances are I'll be visiting those files again soon, so it's fine. Not a perfect solution, but it works for me and my use-case; hopefully it can help others.
I don't know how to turn it off, but I had this on multiple folders and I fixed it by renaming the folder to a random name, then naming it back to the name it was before and the error would go away.
If you have this issuse then uninstall extention then CtrlShiftP on Windows/Linux, ⌘ShiftP on Mac -- then select "Developer: Reload Window" then type developer: relode page this issuse automatically resovle
i have this issuse then i uninstall extension then this issuse resolve.
I was able to permanently prevent this by adding the files to the .gitignore file. It seems that this happens in a cloned repository when you add new files.
In XPages, when I try to open a .js or .jss file, I often get just the tab wirh "Client/Server JS Editor" and nothing else, i.e. the file doesn't load. From the Navigator Eclipse view, I can open the same .js or .jss file using any other editor without problems. And then, it sometimes works, but I don't know yet when it does and when it doesn't. The other Editors are okay by the way, .lss opens nicely.
This behaviour I get for a few weeks now. Since it started I reinstalled Notes a few times, I upgraded to FP8, I also reinstalled Windows10 and Windows10 upgraded me to the Creators Update (with the fix, in the end). There's nothing that explains to me why the file doesn't show up on the screen.
Anyone familiar with this? Could you please tell me how to repair this?
Thanks!!
It's a bug introduced with FP8 that is fixed in FP8 Interim Fix 1. See this document for download options for FP8 IF1.
As a workaround you can do a clean/rebuild of the nsf and then use the SSJS editor.
Using Visual Studio Code I have installed a few extensions (like Guidelines showing vertical dotted lines between pairs of matching brackets). When I start VS Code I can see all my extensions working fine in the Editor window.
However, when I switch to another tab within VS Code, I no longer see the Guidelines or evidence of any extension working in the new editor tab. Worst of all, when I then switch back to my original tab, all the guidelines etc that were there a few seconds ago are gone!
To fix the issue I have to restart VS Code. This can't be right! Has anyone hit the same problem?
I have tried uninstalling VS Code where it warns me some components could not be uninstalled and I have to do them manually. It doesn't tell me which. When I then reinstall, the extensions are visible (without me reinstalling them) but again I hit the same issues as above.
Please help?
Seems like having too many extensions installed, or perhaps one that is misbehaving behind the scenes, causes this problem. Reduce the number of installed extensions. Use Help->Developer Tools -> Console to see if there are any messages relating to the Extensions server
There is a new autocomplete in Xcode. Probably might be useful because it checks not only beginning of names etc. But I found that very often it doesn't find a class name or a const name at all etc. I need to type in entire name by myself. Over all I found it makes my life harder and coding more time consuming. Is there a way to switch to the old way it used to work?
Xcode 7.3.1
In Xcode > Preferences > Text Editing
uncheck Enable type-over completions
restart Xcode
It seems that clearing the checkbox "Enable type-over completions" in XCode -> Preferences -> Text Editing does the trick. At least in my case autocompletion fell back to a sort of old way, so it could autocomplete the class name that I had to type in manually before that.
This is by no means an adequate solution, BUT it has allowed me to (barely) maintain my sanity the past few days:
After every build, you need to trash your Derived Data folder. You can find this folder in Xcode > Preferences > Locations > Derived Data. Just trash the whole thing and it'll kick off a re-indexing step that should restore proper autocomplete functionality.
Unfortunately, I've found that once I build, the autocomplete behavior reverts to its broken state.
just open Xcode derived data folder and delete the folder
/Users/yourUserName/Library/Developer/Xcode/DerivedData
then restart Xcode, now autocompletion works like a charm
I have the impression that some 'parts' of autocompletion simply fail after a while. I use to restart the Mac to get it back working. But sometimes it fails quite soon again.
Maybe the answer of #Alex Bykov combined with a restart will do the trick.
Anyway: auto-completion of Xcode always was crap. AppCode used to get it much better. Unfortunately not yet with swift.
Closed Xcode, opened Xcode, let it index, it worked.
it doesn't find a class name
As a work-around, you can try to press
Command + Shift + K and Command + B
Several times，it works temporarily.
Xcode 7.3.1
I will share another posible reason, that after couple of days we found out. We have multiple schemes, and in one of them, the bridging header was importing a file that didn't exist anymore. So, it didn't break while compiling and running (the header belongs to another scheme) but it caused the autocompletion to break (couldn't find any objective-c class).
Hope it would help someone!
After having tried different methods:
Delete Derived Data
Switching Module Enabled off in Build Settings
Full Clean
Relaunch
Only this worked:
Find any commented out (/* abc */) code after #end in your files and delete.
Credit to Max_B:
https://forums.developer.apple.com/thread/7439
In my case, other projects were auto-completing correctly. If all your projects fail to correctly predict code, then it might be a different issue, and the other answers might work.
I ran into this issue while trying to make an OS X app and I was able to fix this issue by making sure that the Xcode 7.3 documentation and the OS X 10.11.4 documentation was actually downloaded. Doing this fully restored my autocomplete functionality. My full instructions are below as well as in my answer to a similar question: https://stackoverflow.com/a/39420664/3444925
I had this problem myself and after looking through all the other similar questions & answers about this, I couldn't find a solution. However, I finally found what worked for me.
Go to Xcode -> Preferences -> Components. There you will probably find a screen that looks like the following:
This shows that the documentation has not has not been downloaded and therefore, any attempts to re-index or re-build the application without downloading the documentation would prevent you from being able to use the autocompletion functionality.
Once I downloaded the Xcode 7.3 Documentation and the OSX 10.11.4 Documentation, this was enough for me to get the autocomplete functionality back (I was trying to build an OS X app, so feel free to download as much documentation as is relevant for you).
I didn't run into this until I created a couple of new class files. Other classes worked fine, but autocomplete would NOT work for anything in the new files...
FIX (for me) - I had to add those files to ALL of my targets, including the unit test targets even though I wasn't using them yet.