Using Visual Studio Code I have installed a few extensions (like Guidelines showing vertical dotted lines between pairs of matching brackets). When I start VS Code I can see all my extensions working fine in the Editor window.
However, when I switch to another tab within VS Code, I no longer see the Guidelines or evidence of any extension working in the new editor tab. Worst of all, when I then switch back to my original tab, all the guidelines etc that were there a few seconds ago are gone!
To fix the issue I have to restart VS Code. This can't be right! Has anyone hit the same problem?
I have tried uninstalling VS Code where it warns me some components could not be uninstalled and I have to do them manually. It doesn't tell me which. When I then reinstall, the extensions are visible (without me reinstalling them) but again I hit the same issues as above.
Please help?
Seems like having too many extensions installed, or perhaps one that is misbehaving behind the scenes, causes this problem. Reduce the number of installed extensions. Use Help->Developer Tools -> Console to see if there are any messages relating to the Extensions server
Related
This problem is very weird to describe...
Sometimes null characters are added to the end of the open document.
Other times lines are deleted from the end of the document.
I feel like these must be related in a way.
I cannot reliably reproduce the error. But it seems to be connected to when I save the document since it happens much more frequently when autosave is enabled.
Installed extensions are:
Python,
Jupyter,
GithubCopilot,
R
The problem appears as soon as the jupyter extension is enabled.
The funny thing is I have the exact same setup on my desktop with absolutely no problems.
I tried removing visual studio code and the files created in the following folders:
%APPDATA%\Code and %USERPROFILE%.vscode - along with the other extension files like .jupyter.
Reinstalled everything.
Same problem.
You may install the Prettier extension. Prettier would suggest you add a blank line at the end of files so it may prevent cutting the final line in your saved files. I usually use this method.
You can find it on VS Code Marketplace or the documentation.
Emmet Abbreviations are not working for me in VS Code. I looked up solutions, and added "emmet.triggerExpansionOnTab": true to my settings.json file.
When I added it, every time I pressed tab to indent it says "command 'emmet.expandAbbreviation' not found".
It stops showing that once I remove the line.
Additionally, there is no syntax coloring or suggestions in HTML files. I tried to fix it by adding "files.associations": {"*.html": "html"} but that didn't work either.
Does anyone know how to fix this?
I had this issue too, but I simply restarted VS Code and that actually solved the problem!
I had the same issue as well and could not find much help.. but what fixed it for me was using a previous version.. so something with the never version might not work with my settings I guess (and some them I can't change like my Mac OS..;-).. as my mac is 2015 edition).. Anyways if you are still having this issue.. this link is what worked for me..
https://code.visualstudio.com/updates/v1_55
Download an earlier version and you should be fine...
I simply commented out "emmet.triggerExpansionOnTab": true then it started working.
After trying a lot of different things (including re-installing vscode) I got desperate, disabled all of my extensions, reloaded vscode, and then reinstalled my key extensions. I didn't figure out which extension may have been causing the problem, but that did get it working again.
I solved it by re-enabling the emmet extension again. Not sure when it has been disabled.
Open the built-in extensions explorer (direct command: Extensions: Show Built-in Extensions), scroll down to find the emmet extension. For me it was disabled, and I had to open the context menu and click Enabled.
I recently encountered this problem after a VS Code update. I searched for disabled extensions and saw that, to my surprise, some 2/3 of my extensions have been disabled. I manually enabled one which seems to have triggered something because within seconds all these extensions (except those I actually had disabled some time ago) were live again.
I need to figure out how to turn off emphasized items in Visual Studio Code
This might sound like a strange requirement, but in my workflow vscode functions as less an IDE than a cross-platform ViM-esque frontend with lots of remote development tools built-in.
Due to this use case, I don't need or want the linting features to show up in the file browser. How might I accomplish this?
Attempts to solve the problem
I've run out of search terms here and cannot find an answer.
Searches including terms in this question's title yielded little
SO-specific search queries also yielded little
This seems to be somewhat related, at least as a representation of the "feature" I'm referencing: VS code containes emphasized items but no error
VSCode "preferences" do not appear to show what I'm looking for, likely an issue with me not searching for the right variable name.
In my experience with VSCode it has been wonderfully customize-able, so I'm guessing there's a setting somewhere ready to be modified to accomplish this. Any help much appreciated, thanks!
My use case was a bit different: after viewing some files in a git submodule those files became linted, and errors and warnings cluttered up my VS Code Explorer file browser window on files I had no intention of ever handling. I basically wanted a way to clear out those lint warnings, and found it here. The solution is to reload the window:
CtrlShiftP on Windows/Linux, ⌘ShiftP on Mac -- then select "Developer: Reload Window"
One by-product of reloading the window is that it clears out those unwanted warnings (at least until the next time I visit the file). It also has the effect of clearing out warnings on files that I would normally want to see, of course, but chances are I'll be visiting those files again soon, so it's fine. Not a perfect solution, but it works for me and my use-case; hopefully it can help others.
I don't know how to turn it off, but I had this on multiple folders and I fixed it by renaming the folder to a random name, then naming it back to the name it was before and the error would go away.
If you have this issuse then uninstall extention then CtrlShiftP on Windows/Linux, ⌘ShiftP on Mac -- then select "Developer: Reload Window" then type developer: relode page this issuse automatically resovle
i have this issuse then i uninstall extension then this issuse resolve.
I was able to permanently prevent this by adding the files to the .gitignore file. It seems that this happens in a cloned repository when you add new files.
what I did is just changed the color theme and after that, it is stopped working as expected regular behavior, It is not showing suggestions, VS Code IntelliCode also not working as before I have done efforts of my side as like uninstalled all extensions and installed them again, deleted VS Code from applications and installed it again. Image You can see the extensions which are using currently and also you can observe that I'm using the style of justify-content when I typed the quotes then it is supposed to show all the values available for it. but it is not showing currently
Please let me know, are there any possible ways to get back to the normal behavior of VS Code for Mac?
I already uninstalled all the extensions and installed them again, removed VS Code from Applications. and downloaded the latest version from the official VS Code site.
I installed a plugin that allowed me to create UML diagram from my code. Everything was working fine until I found that now all keyboard shortcuts (like CTRL-X, CTRL-Z, CTRL-SPACE, CTRL-SHIFT-F,..) except for CTRL-C and CTRL-V now require a click on a small square that appear on the bottom right corner. And this is required every single time.
This are few examples of the square that appears:
If I click on the message or press Enter I can access the functionality. Does anyone know how to get rid of this annoying thing or at least reset Eclipse related configurations?
Thanks in advance
EDIT:
I obviously tried uninstalling the plugin but nothing changed.
Try Window / Reset Perspective as the duplicate shortcuts may be still in the perspective.
Also try restart specifying -clean option to rebuild the workspace metadata.
The pop-ups you are seeing are the "keybinding conflict" popups. These are common when you have two different plugins defining the same keybinding and looks like these. Still in your case there's only one option to choose from and it definitely looks like a bug.
In the Eclipse bugtracker database there are two issues that are looking like the one you have: #377048 and #374942.
These issues are marked as fixed in 4.2-I20120410-0633. So if you are having Eclipse 4.2 without any service releases installed, you would probably have this. The solution is - to use a newer Eclipse version. Eclipse 4.3.1 is available to download since today, and it should contain a lot of other fixes since 4.2. So I encourage you to install it.
The other solution could be to try playing with keybinding dialog (Window->Preferences->General->Keys) and trying to unbind and re-bind the commands that you are having issues with.