I'm having problems in uploading some folders from the local machine to a server.
When I run the command
scp -r -i pathtokey.txt pathtomyfiles pathtotheserver
For some folders the transfer doesn't succed. I noticed that this happens for the folders where I have R projects. It transfers just usually hidden files named as "source-pane.pper" "chunks.json", but nothing else.
For other folders, where I don't have any of that, the transfer goes fine, meaning that the command I'm using is ok.
Any suggestion of what is happening here and how to solve?
Just to give you all the information, my local machine has windows system
Thanks a lot,
Francesca
I'm unsure why this is failing unfortunately. However an alternative may be to look at using rsync:
rsync <options> <source> <destination>
rsync -azv source_dir/ username#server:~/path/to/folder
I've not tried this while specifying an ssh key explicitly but the answer below explains how to do so. Alternatively you can just type in the password manually if you know it.
https://unix.stackexchange.com/questions/127352/specify-identity-file-id-rsa-with-rsync
I am trying to set up a simple bat file to help non-tech people execute scripts by just clicking a file on desktop.
I haven't used windows in a while, and don't have a real dev environment set up on the computers they are going to be using. I installed putty, and can manually ssh into the pi's and run commands, but I can't teach that process to the employees.
I would like to create a simple bat file that runs the following commands:
ssh pi#192.168.1.xxx
<enter password>: 'xxx'
sudo reboot
Is there a way to do this?
Thank you!
Downloaded Plink #
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
I moved it, AND putty to c:/windows/system32 instead of changing PATH
This doesn't seem necessary, as the next step will automatically locate the file and change the path.
On desktop, right click and create a new shortcut.
In the shortcut path, I typed:
plink -ssh username#192.16.1.xxx -pw raspberry sudo reboot
This worked.
if you recheck the shortcut again, it should automatically change the path to execute plink
I have two installer i1.sh & i2.sh and both have respectively i1.varfile & i2.varfile where they customize the installation directory.
First, we launch the i1.sh as this:
[localhost]$ sudo ./i1.sh -q
The i2.sh is launched by the i1.sh via the action Run executable or batch file.
The problem is that in the file sudo vi /root/.java/.userPrefs/com/install4j/installations/prefs.xml an entry exists only for the i1 but never for the i2.
[Edit]
After watching this file with the command:
watch "sudo cat /root/.java/.userPrefs/com/install4j/installations/prefs.xml"
We noticed that the entries for i2 are added and directly overwritten by those of the i1.
Any ideas plz?
Thanks
The solution is to run a script after the launching of the second installer to synchronize the prefs.xml
Run script Action:
java.util.prefs.Preferences.userRoot().sync();
java.util.prefs.Preferences.systemRoot().sync();
return true;
Special thanks to the install4j support team
I have to take quite a few steps before I get into the file I need to be, which is why I'm trying to set up an alias in my terminal, that gets me to the file by running that alias.
The following steps are needed to arrive where I have to be:
cd Sites
vagrant ssh
cd /var/www/miniportal.billetten.dk/logs/
sudo -s
cd /etc/apache2/sites-available/
nano 25-av_miniportal.conf
Edit line 33 in that file (I guess it's possible to jump to that line)
I tried setting up an alias like this, but the problem is that it stops running the rest of the command after I SSH'd into Vagrant. if I manually exit Vagrant, it continues the command (and of course returns an error, because there is no such folder).
The question is: How do I make sure that everything from step 3 is executed AFTER step 2 is done logging in through SSH?
My ultimate goal is to set up an Apple Automator program that lets me put in a value that gets entered on line 33, but I'm fine with just an alias for now.
I know I asked this question a long time ago, but in the meantime I found a solution and forgot I had posted this question.
My alias in my .zshrc-file looks like this:
alias changeCust='ssh -t root#192.168.56.101 "nano +32 /etc/apache2/sites-enabled/25-av_miniportal.conf && service apache2 reload"'
In other words, it SSHs into vagrant as root (it asks for my password), nanos into a file on line 32 (or whatever line you need), then, when the file is saved, it reloads apache2 and the changes are applied.
Just use the below one and change the values.
alias AliasName='ssh -t root#your.ip.addres.here "nano +lineNumber /path/to/file"'
I had this in my Windows services:
C:/Program Files/PostgreSQL/8.4/bin/pg_ctl.exe runservice -N "postgresql-8.4" -D "D:/PostgreSQL/8.4/data" -w
It never finishes executing. But if I did this on the dos shell:
C:/Program Files/PostgreSQL/8.4/bin/pg_ctl.exe start -N "postgresql-8.4" -D "D:/PostgreSQL/8.4/data" -w
Notice that I only changed the "runservice" to "start" and it works just fine.
Any idea?
The command runservice can only be executed by the service manager
in order to fix my localhost windows 7 to start postgres as a service
i used the following command to start the data
pg_ctl -D "C:\Program Files\PostgreSQL\9.1\data" start
Then checked the status for errors
pg_ctl -D "C:\Program Files\PostgreSQL\9.1\data" status
if you get error 1063 , its more than likely permissions, i executed the following command
cacls "C:\Program Files\PostgreSQL\9.1\data" /E /T /C /G postgres:F
then reran the start/status, it showed everything fine, but still service manager would not start the service
So, in Services->postgresql->options->logon i set the log on as the Local system account instead of the postgres user, and voila it worked
this happened to me because i set my data directory to be somewhere the postgres windows user account didn't have access to.
I had this problem in Windows after a system crash. Running the first command showed invalid data in C:\Program Files\PostgreSQL\9.1\data\postmaster.pid. Deleting that file did the trick. Reference.
I faced the same issue after moving manually the database data files (PG_DATA directory) without recreating all the necessary permissions.
Here is how I solved my issue:
1. Check permissions on old PG_DATA directory:
cacls "c:\path\to\old\pgdata\dir"
2. Check permissions on new PG_DATA directory:
cacls "d:\path\to\NEW\pgdata\dir"
3. Compare outputs from 1. and 2.
Find the differences between users and/or permissions then synchronize them.
Nota: I found it easier to use explorer for the synchronization step rather than using cacls directly from the command line.
If you changed pg_hba.conf , maybe you missed somewhere in file. For example there must be CIDR after IP in that file. It must be like 192.168.1.100/32
If you forgot to put 32, then server doesnt restart.
Investigation of startup logs could be a clue. For the case problem is in the pg_hba.conf you could see something like this:
2018-11-13 00:39:34.841 PST [8284] FATAL: could not load pg_hba.conf
2018-11-13 00:39:34.842 PST [8284] LOG: database system is shut down
You need to check your logfiles and the windows eventlog for some hint of what the problem is. If there is nothing at all there, you need to break out something like Process Monitor and get a stacktrace of where it's hung.
I have had this issue in the past, and it was that the installer did not set up the permissions correctly for the user that the service was to run as.
I've also ran into this problem with postgresql throwing and error after trying to initialize the database cluster. After analyzing the log files and running command line scripts for 4 hours I've got the solution to anyone running into this problem for Windows Versions.
This is not a detailed description as to why its happening. I've installed odoo 10, 11, 12 and 13 numerous times on countless client servers and windows systems and this is the first time I've ever ran into this problem. I cant say if its because I have MS VS Enterprise installed and Android Studio on this machine or what. But Below is the easy answer on how to fix it and initialize the cluster and create the database files in the data folder.
Open the data folder for postgresql. - For Odoo installs it will normally be "C:\Program Files (x86)\Odoo 13.0\PostgreSQL" Unless you chose another location when installing.
Remove any or all files from this folder - If not you will get an error when running initdb.exe
Right click the data folder and open up the properties for it. Click on the Security tab and then click the advanced button on the bottom.
You need to change the owner of this folder to openpgsvc. Click Change and type in openpgsvc and click ok. Once done click the check box below saying that you want this change to affect containers with this container as well.
Then on the Permissions tab click the add button on the bottom. You need to add openpgsvc as a user and give this user full rights. Click apply and and ok to close out of all the folder properties.
Now you need to open cmd.exe - Once open we are going to call initdb.exe and pass some values to it as well.
First run chdir and change the working directory to the location of initdb.exe. For me, running odoo 13 on a windows 10 machine the location is this..
"C:\Program Files (x86)\Odoo 13.0\PostgreSQL\bin"
There is one variable that need to be passed as well to make this work here is the list. NEEDS TO BE INCLUDED IN THE CALL TO initdb.exe
Postgres Data Dir: "C:\Program Files (x86)\Odoo 13.0\PostgreSQL\data"
The End Result with the parameter would look like this for my installation:
"C:\Program Files (x86)\Odoo 13.0\PostgreSQL\bin\initdb.exe" -D "C:\Program Files (x86)\Odoo 13.0\PostgreSQL\data"
Hit Enter and let it rip. The output of this command should look like this below.
Cmd.exe running initdb.exe script
Make sure there is no buggy empty file Program at C:\ like C:\Program
In this case, explorer will warn whenever you log on into Windows.
File Name Warning
-----------------
There is a file or folder on your computer called "C:\Program" which
could cause certain applications to not function correctly. Renaming it
to "C:\Program1" would solve this problem. Would you like to rename
it now?
Installing PostgreSQL 10 On Windows 7 (yes the clock is ticking...). I first tried the latest version 11 which completely failed to install... not a good sign for Windows users. Anyway.
Quick answer: Change the account in the Windows Services panel from Network to Local.
Details of my case
During installation I created/selected a data folder in the user profile folder, because obviously the folder suggested by default, within the program folder, wouldn't work, and if it worked it would be a very idea to put data here (I don't know whether it's usual to do that on Unix/Linux, but for Windows it's it's not allowed for a long time).
At the end (when populating the data cluster) I received an error:
Failed to load SQL Modules into database Cluster
but the installation was able to complete. I found two pages about previous error, here and here, but they didn't seem relevant to my case, so I just started pgAdmin and, on the left "browser", saw the server wasn't active.
I tried to start it from here (had to type the main password), but it went inactive immediately again. So I tried to use the Windows services panel to start "postgresql-x64-10", no joy. I copied the command from this panel and pasted it into a Windows console (cmd.exe) where I finally received this
error 1063.
Searching I found this related question, and was convinced the problem was about permissions.
Solution working for my case
In the services panel I changed the account used to start the service from Network Service to Local System as suggested in a comment by #AlexanderRios.
sc create "postgresql-9.2" binPath= "\"C:/Program Files (x86)/PostgreSQL/9.2/bin/pg_ctl.exe\" runservice -N \"postgresql-9.2\" -D \"C:/Program Files (x86)/PostgreSQL/9.2/data\" -w" DisplayName= "postgresql-9.2" start= auto
Try this on CMD run as Administrator
(Add your parameters depend on your version)
Stop all postgres processes
Go to the postgres data folder (C:\Program Files\PostgreSQL\9.6\data)
Delete the postmaster.opts and postmaster.pid files
From the control panel, in administrative
tools and the services console start the postgres service
open pgAdmin III and then in right pane find server then just right click and connect, enter the password. after connected go to the browser and refresh ODOO. Problem solved.
See image to get better understanding