I am trying to set up a simple bat file to help non-tech people execute scripts by just clicking a file on desktop.
I haven't used windows in a while, and don't have a real dev environment set up on the computers they are going to be using. I installed putty, and can manually ssh into the pi's and run commands, but I can't teach that process to the employees.
I would like to create a simple bat file that runs the following commands:
ssh pi#192.168.1.xxx
<enter password>: 'xxx'
sudo reboot
Is there a way to do this?
Thank you!
Downloaded Plink #
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
I moved it, AND putty to c:/windows/system32 instead of changing PATH
This doesn't seem necessary, as the next step will automatically locate the file and change the path.
On desktop, right click and create a new shortcut.
In the shortcut path, I typed:
plink -ssh username#192.16.1.xxx -pw raspberry sudo reboot
This worked.
if you recheck the shortcut again, it should automatically change the path to execute plink
Related
I've been trying to write a powershell script that automates my windows workspace setup and configuration and am currently stuck trying to redirect input to WSL when executing it for the first time. The core of the problem is that Ubuntu's first launch prompts for a username and password, then logs in to a bash shell. I tried writing down the input lines into a text file like so:
Username
Password
Password
exit
Then, I tried redirecting the input of wsl to the file:
Start-Process ubuntu2004.exe -RedirectStandardInput stdin.txt -NoNewWindow -Wait
The above didn't work as executing WSL just starts spamming Enter new UNIX username: adduser: only one or two names allowed. I tried doing same in CMD with the < input redirection, but the result is the same.
This is not exactly the answer to your question, but in my opinion, ansible is better suited for such a task.
I myself recently became interested in assembling a workspace in wsl and ansible seemed to me the best solution.
Before starting the build, you will need to perform minimal steps (create a user and install several packages, all this can be placed in the readme), but then there will be no restrictions.
You can find several ready-made examples of wsl assembly via ansible on github.
A few ideas for setting the username/password in a new Ubuntu WSL instance:
First, a "PowerShell sendkeys" via COM or Interop might work for this. It's probably the closest in behavior to what you are actually asking.
Second, and perhaps most promising, I just tried this with a new Debian WSL installed from the Store (since I didn't want to mess with my Ubuntu install).
When running debian.exe (like ubuntu2004.exe), I let it run the install, then I Ctrl+C'd out of it when it started asking for the default username/password. At that point, the WSL instance is installed, but with only root. I assume that your script can let the command run for a certain period of time, then kill the process to replicate this.
From your script, you should then be able to run wsl -u root useradd --create-home --user-group --groups adm,dialout,cdrom,floppy,sudo,audio,dip,video,plugdev,netdev --password "encryptedPassword" username (see here for creating the encrypted password). I think that will get you a stock Ubuntu user the way that WSL sets it up.
You'll then need to either create a /etc/wsl.conf file (instructions) letting the instance know that that user is the default, or LxRunOffline lists this as one of its features.
But I'd also throw in that you might just want to keep a "backup" of an existing WSL instance that you start from. Do a wsl --export <distroname> <imagename.tgz>, then you can import it when setting up the new Windows host by copying the tgz over and doing a wsl --import <DistroName> <DirectoryWhereYouwantItToLive> <imagename.tgz>.
If you want, you can keep this image up to date with your desired WSL configuration, so that you don't have to recreate it when you rebuild the Windows hosts. That said, this is where I do follow #Mystic's suggestion of using Ansible to store my WSL "configuration as code". It allows me to not only recreate my WSL instances, but also that same configuration when I set (or reset) a Linode host or another Linux system.
I have a .msi file in my remote machine which is in a different domain from my local machine. I am able to connect to the remote machine with powershell but how can I install the msi there. The installation process has a lot of inputs to be given along with pressing 'Next' and then again giving a particular input and radio buttons and many more. Thus it is an interactive installation. In my local I am able to do it with [System.Windows.Forms.SendKeys] to imitate the keyboard inputs but as the process will be running in background in the remote machine I don't think SendKeys will work. And 'psexec' is not an option here because in my remote machine I cannot include PSTools with my Powershell. Is there any way to do it with Invoke-Command and -ArgumentList??
If there is a way then how can I choose sequentially whether to input a text in a particular field or click the next button or click any other button within the application window??
I finally got to solve this puzzle with the help of a automation tool called AutoIt. This tool has its own scripting language and can create .exe files to run a particular application and do the corresponding installation steps based on each successive window the application installer pops. After creating the .exe I copied it to my remote machine using Copy-Item or you can use robocopy, then invoked the .exe remotely with the help of psexec. As I had the misconception previously about psexec, it only needs to be integrated with powershell at the local and thus it automatically creates a session of its own and interacts with the remote machine. This is the command to run the .exe on remote machine:-
psexec -i 2 -s -d \\remote_machine_name -u Username -p Password C:\Path_to_exe\installer.exe
You can actually log on to the remote machine and see in the GUI that it is happening. And yes, obviously you need to have the .msi which will be called to be present there in the remote machine so that the .exe can do its job locally in the remote session.
I have a scenario where I need to run a linux shell command frequently (with different filenames) from windows. I am using PuTTY and WinSCP to do that (requires login name and password). The file is copied to a predefined folder in the linux machine through WinSCP and then the command is run from PuTTY. Is there a way by which I can automate this through a program. Ideally I would like to right click the file from windows and issue the command which would copy the file to remote machine and run the predefined command (in PuTTy) with the filename as argument.
Putty usually comes with the "plink" utility.
This is essentially the "ssh" command line command implemented as a windows .exe.
It pretty well documented in the putty manual under "Using the command line tool plink".
You just need to wrap a command like:
plink root#myserver /etc/backups/do-backup.sh
in a .bat script.
You can also use common shell constructs, like semicolons to execute multiple commands. e.g:
plink read#myhost ls -lrt /home/read/files;/etc/backups/do-backup.sh
There could be security issues with common methods for auto-login.
One of the most easiest ways is documented below:
Running Putty from the Windows Command Line
And as for the part the executes the command
In putty UI, Connection>SSH> there's a field for remote command.
4.17 The SSH panel
The SSH panel allows you to configure
options that only apply to SSH
sessions.
4.17.1 Executing a specific command on the server
In SSH, you don't have to run a
general shell session on the server.
Instead, you can choose to run a
single specific command (such as a
mail user agent, for example). If you
want to do this, enter the command in
the "Remote command" box.
http://the.earth.li/~sgtatham/putty/0.53/htmldoc/Chapter4.html
in short, your answers might just as well be similar to the text below:
let Putty run command in remote server
You can write a TCL script and establish SSH session to that Linux machine and issue commands automatically. Check http://wiki.tcl.tk/11542 for a short tutorial.
You can create a putty session, and auto load the script on the server, when starting the session:
putty -load "sessionName"
At remote command, point to the remote script.
You can do both tasks (the upload and the command execution) using WinSCP. Use WinSCP script like:
option batch abort
option confirm off
open your_session
put %1%
call script.sh
exit
Reference for the call command:
https://winscp.net/eng/docs/scriptcommand_call
Reference for the %1% syntax:
https://winscp.net/eng/docs/scripting#syntax
You can then run the script like:
winscp.exe /console /script=script_path\upload.txt /parameter file_to_upload.dat
Actually, you can put a shortcut to the above command to the Windows Explorer's Send To menu, so that you can then just right-click any file and go to the Send To > Upload using WinSCP and Execute Remote Command (=name of the shortcut).
For that, go to the folder %USERPROFILE%\SendTo and create a shortcut with the following target:
winscp_path\winscp.exe /console /script=script_path\upload.txt /parameter %1
See Creating entry in Explorer's "Send To" menu.
Here is a totally out of the box solution.
Install AutoHotKey (ahk)
Map the script to a key (e.g. F9)
In the ahk script,
a) Ftp the commands (.ksh) file to the linux machine
b) Use plink like below. Plink should be installed if you have putty.
plink sessionname -l username -pw password test.ksh
or
plink -ssh example.com -l username -pw password test.ksh
All the steps will be performed in sequence whenever you press F9 in windows.
Code:
using System;
using System.Diagnostics;
namespace playSound
{
class Program
{
public static void Main(string[] args)
{
Console.WriteLine(args[0]);
Process amixerMediaProcess = new Process();
amixerMediaProcess.StartInfo.CreateNoWindow = false;
amixerMediaProcess.StartInfo.UseShellExecute = false;
amixerMediaProcess.StartInfo.ErrorDialog = false;
amixerMediaProcess.StartInfo.RedirectStandardOutput = false;
amixerMediaProcess.StartInfo.RedirectStandardInput = false;
amixerMediaProcess.StartInfo.RedirectStandardError = false;
amixerMediaProcess.EnableRaisingEvents = true;
amixerMediaProcess.StartInfo.Arguments = string.Format("{0}","-ssh username#"+args[0]+" -pw password -m commands.txt");
amixerMediaProcess.StartInfo.FileName = "plink.exe";
amixerMediaProcess.Start();
Console.Write("Presskey to continue . . . ");
Console.ReadKey(true);
}
}
}
Sample commands.txt:
ps
Link: https://huseyincakir.wordpress.com/2015/08/27/send-commands-to-a-remote-device-over-puttyssh-putty-send-command-from-command-line/
Try MtPutty,
you can automate the ssh login in it. Its a great tool especially if you need to login to multiple servers many times. Try it here
Another tool worth trying is TeraTerm. Its really easy to use for the ssh automation stuff. You can get it here. But my favorite one is always MtPutty.
In case you are using Key based authentication, using saved Putty session seems to work great, for example to run a shell script on a remote server(In my case an ec2).Saved configuration will take care of authentication.
C:\Users> plink saved_putty_session_name path_to_shell_file/filename.sh
Please remember if you save your session with name like(user#hostname), this command would not work as it will be treated as part of the remote command.
I have been trying to deploy my app into the Fortrabbit servers using the command line. I'm using windows. Here is what I tried :
C:\projects\riwaya>git remote add fort git#git2.eu1.frbit.com:riwaya.git
C:\projects\riwaya>git remote fort
C:\projects\riwaya>ssh u-riwaya#ssh2.eu1.frbit.com
'ssh' is not recognized as an internal or external command, operable program or batch file.
I have watched This Laracast Video and did the same as Jeffrey but it doesn't work ...
Can somebody help ?
Actually you have 2 problems here: First is that you don't have ssh installed, second is that you don't know how to deploy
Install SSH
It seems that ssh is not installed on your computer.
You can install openssh from here : http://openssh.en.softonic.com/download
Generate your key
Than you will have to geneate your ssh-key. There's a good tutorial about this here:
https://help.github.com/articles/generating-ssh-keys#platform-windows
Deploy
To deploy, you just have to push your code over git. Something like this:
git push fort master
If you get permission denied, be sure that you have put your public_key in the dashboard in the git tab.
SSH
The ssh command gives you access to your remote node. You should have received a password by email and now that you have ssh installed, you should be asked for a password when trying to connect. just input that password. If you want to use your private ssh key to connect to your server rather then typing that password, you can follow this : http://fortrabbit.com/docs/how-to/ssh-sftp/enable-public-key-authentication
For Windows, first install the git base from here: https://git-scm.com/downloads
Next, set the environment variable:
Press Windows+R and type sysdm.cpl
Select advance -> Environment variable
Select path-> edit the path and paste the below line:
C:\Program Files\Git\git-bash.exe
To test it, open the command window: press Windows+R, type cmd and then type ssh.
First of all Go to browser and install openssh here: https://github.com/PowerShell/Win32-OpenSSH/releases
Next step, extract rar file into folder and then copy and paste it in your drive.
after that run command: ssh it should work.
Next step is right click on shh in openssh folder and go to properties. Copy the path
and paste it in system variables in edit environment variables.
It will work fine.
TLDR, add this to settings.json
"terminal.integrated.env.windows":
{
"PATH": "C:/Windows/System32/OpenSSH",
},
Just found a case when the integrated terminal hasn't recognized 'ssh' as command, but you tried 'ssh' that was working on external terminals like CMD, git-bash.
That means you didn't add PATH variable to your integrated terminal.
If anyone looking for solution even now, here is how I did it for my Windows 10 machine.
Start > type 'Manage Optional Features'
Add Feature [+]
Look for OpenSSH client & select & install
After successful installation, open (close if already opened) powershell or command prompt and run ssh!
i have installed fresshd in one of my windows server.now i am connect to the system through putty. It is working fine.
my issue us when i am running from command line
PuTTY.lnk -ssh -2 -P 22 username#XXX -pw pswd -m command.txt
commands given in the command.txt files are not executed it just open the putty console and it is closing.
when Running from Jenkins also same issue.
I am not sure if you are connecting to Windows from a Linux machine, or to Linux from a Windows machine. Or Windows to Windows?
PuTTY.lnk is not an executable. If you try to run that, it should produce an error 'PuTTY.lnk' is not recognized as an internal or external command. I am assuming you are running the command from a Windows machine, since you are referring to windows shortcut file (.lnk)
You need to use PuTTY.exe + the rest of your command line. Please note that unless it is in your $PATH settings, you would have to provide a full path to the .exe, for example C:\LocationOfPuttyInstall\putty.exe -ssh -2 -P 22 username#XXX -pw pswd -m command.txt. For the sake of preventing any other problem, you should also specify a correct full path to the command.txt file.
If you are not sure where your Putty is installed, on the Windows machine, do the following:
Right click your PuTTY shortcut (the PuTTY.lnk file)
Look under "Target"
That would list your full path to PuTTY.exe executable.
This should resolve your problem.
p.s.
Usually Putty is used to connect from a Windows machine to a Linux machine. From your question, it almost looks like you are trying to connect from a Windows machine to another Windows machine.
You should use PsExec windows tool for such purposes:
http://technet.microsoft.com/en-us/sysinternals/bb897553.aspx