Related
I cannot understand some key elements of encoding:
Is ASCII only a character or it also has its encoding scheme algorithm ?
Does other windows code pages such as Latin1 have their own encoding algorithm ?
Are UTF7, 8, 16, 32 the only encoding algorithms ?
Does the UTF alghoritms are used only with the UNICODE set ?
Given the ASCII text: Hello World, if I want to convert it into Latin1 or BIG5, which encoding algorithms are being used in this process ? More specifically, does Latin1/Big5 use their own encoding alghoritm or I have to use a UTF alghoritm ?
1: Ascii is just an encoding — a really simple encoding. It's literally just the positive end of a signed byte (0...127) mapped to characters and control codes.
Refer to https://www.ascii.codes/ to see the full set and inspect the characters.
There are definitely encoding algorithms to convert ascii strings to and from strings in other encodings, but there is no compression/decompression algorithm required to write or read ascii strings like there is for utf8 or utf16, if that's what you're implying.
2: LATIN-1 is also not a compressed (usually called 'variable width') encoding, so there's no algorithm needed to get in and out of it.
See https://kb.iu.edu/d/aepu for a nice description of LATIN-1 conceptually and of each character in the set. Like a lot of encodings, its first 128 slots are just ascii. Like ascii, it's 1 byte in size, but it's an unsigned byte, so after the last ascii character (DEL/127), LATIN1 adds another 128 characters.
As with any conversion from one string encoding to another, there is an algorithm specifically tailored to that conversion.
3: Again, unicode encodings are just that — encodings. But they're all compressed except for utf32. So unless you're working with utf32 there is always a compression/decompression step required to write and read them.
Note: When working with utf32 strings there is one nonlinear oddity that has to be accounted for... combining characters. Technically that is yet another type of compression since they save space by not giving a codepoint to every possible combination of uncombined character and combining character. They "precombine" a few, but they would run out of slots very quickly if they did them all.
4: Yes. The compression/decompression algorithms for the compressed unicode encodings are just for those encodings. They would not work for any other encoding.
Think of it like zip/unzip. Unzipping anything other than a zipped file or folder would of course not work. That goes for things that are not compressed in the first place and also things that are compressed but using another compression algorithm (e.g.: rar).
I recently wrote the utf8 and utf16 compression/decompression code for a new cross-platform library being developed, and I can tell you quite confidently if you feed a Big5-encoded string into my method written specifically for decompressing utf8... not only would it not work, it might very well crash.
Re: your "Hello World" question... Refer to my answer to your second question about LATIN-1. No conversion is required to go from ascii to LATIN-1 because the first 128 characters (0...127) of LATIN-1 are ascii. If you're converting from LATIN-1 to ascii, the same is true for the lower half of LATIN-1, but if any of the characters beyond 127 are in the string, it would be what's called a "lossy"/partial conversion or an outright failure, depending on your tolerance level for lossiness. In your example, however, all of the characters in "Hello World" have the exact same values in both encodings, so it would convert perfectly, without loss, in either direction.
I know practically nothing about Big5, but regardless, don't use utf-x algos for other encodings. Each one of those is written very specifically for 1 particular encoding (or in the case of conversion: pair of encodings).
If you're curious about utf8/16 compression/decompression algorithms, the unicode website is where you should start (watch out though. they don't use the compression/decompression metaphor in their documentation):
http://unicode.org
You probably won't need anything else.
... except maybe a decent codepoint lookup tool: https://www.unicode.codes/
You can roll your own code based on the unicode documentation, or use the official unicode library:
http://site.icu-project.org/home
Hope this helps.
In general, most encoding schemes like ASCII or Latin-1 are simply big tables mapping characters to specific byte sequences. There may or may not be some specific algorithm how the creators came up with those specific character⟷byte associations, but there's generally not much more to it than that.
One of the innovations of Unicode specifically is the indirection of assigning each character a unique number first and foremost, and worrying about how to encode that number into bytes secondarily. There are a number of encoding schemes for how to do this, from the UCS and GB 18030 encodings to the most commonly used UTF-8/UTF-16 encodings. Some are largely defunct by now like UCS-2. Each one has their pros and cons in terms of space tradeoffs, ease of processing and transportability (e.g. UTF-7 for safe transport over 7-bit system like email). Unless otherwise noted, they can all encode the full set of current Unicode characters.
To convert from one encoding to another, you pretty much need to map bytes from one table to another. Meaning, if you look at the EBCDIC table and the Windows 1250 table, the characters 0xC1 and 0x41 respectively both seem to represent the same character "A", so when converting between the two encodings, you'd map those bytes as equivalent. Yes, that means there needs to be one such mapping between each possible encoding pair.
Since that is obviously rather laborious, modern converters virtually always go through Unicode as a middleman. This way each encoding only needs to be mapped to the Unicode table, and the conversion can be done with encoding A → Unicode code point → encoding B. In the end you just want to identify which characters look the same/mean the same, and change the byte representation accordingly.
A character encoding is a mapping from a sequence of characters to a sequence of bytes (in the past there were also encodings to a sequence of bits - they are falling out of fashion). Usually this mapping is one-to-one but not necessarily onto. This means there may be byte sequences that don't correspond to a character sequence in this encoding.
The domain of the mapping defines which characters can be encoded.
Now to your questions:
ASCII is both, it defines 128 characters (some of them are control codes) and how they are mapped to the byte values 0 to 127.
Each encoding may define its own set of characters and how they are mapped to bytes
no, there are others as well ASCII, ISO-8859-1, ...
Unicode uses a two step mapping: first the characters are mapped to (relatively) small integers called "code points", then these integers are mapped to a byte sequence. The first part is the same for all UTF encodings, the second step differs. Unicode has the ambition to contain all characters. This means, most characters are in the "UNICODE set".
Every character in the world has been assigned a unicode value [ numbered from 0 to ...]. It is actually an unique value. Now, it depends on an individual that how he wants to use that unicode value. He can even use it directly or can use some known encoding schemes like utf8, utf16 etc. Encoding schemes map that unicode value into some specific bit sequence [ can vary from 1 byte to 4 bytes or may be 8 in future if we get to know about all the languages of universe/aliens/multiverse ] so that it can be uniquely identified in the encoding scheme.
For example ASCII is an encoding scheme which only encodes 128 characters out of all characters. It uses one byte for every character which is equivalent to utf8 representation. GSM7 is one other format which uses 7 bit per character to encode 128 characters from unicode character list.
Utf8:
It uses 1 byte for characters whose unicode value is till 127.
Beyond this it has its own way of representing the unicode values.
Uses 2 byte for Cyrillic then 3 bytes for Hindi characters.
Utf16:
It uses 2 byte for characters whose unicode value is till 127.
and it also uses 2 byte for Cyrillic, Hindi characters.
All the utf encoding schemes fixes initial bits in specific pattern [ eg: 110|restbits] and rest bits [eg: initialbits|11001] takes the unicode value to make a unique representation.
Wikipedia on utf8, utf16, unicode will make it clear.
I coded an utf translator which converts incoming utf8 text across all languages into its equivalent utf16 text.
Was reading Joel Spolsky's 'The Absolute Minimum' about character encoding.
It is my understanding that ASCII is a Code-point + Encoding scheme, and in modern times, we use Unicode as the Code-point scheme and UTF-8 as the Encoding scheme. Is this correct?
In modern times, ASCII is now a subset of UTF-8, not its own scheme. UTF-8 is backwards compatible with ASCII.
Yes, except that UTF-8 is an encoding scheme. Other encoding schemes include UTF-16 (with two different byte orders) and UTF-32. (For some confusion, a UTF-16 scheme is called “Unicode” in Microsoft software.)
And, to be exact, the American National Standard that defines ASCII specifies a collection of characters and their coding as 7-bit quantities, without specifying a particular transfer encoding in terms of bytes. In the past, it was used in different ways, e.g. so that five ASCII characters were packed into one 36-bit storage unit or so that 8-bit bytes used the extra bytes for checking purposes (parity bit) or for transfer control. But nowadays ASCII is used so that one ASCII character is encoded as one 8-bit byte with the first bit set to zero. This is the de facto standard encoding scheme and implied in a large number of specifications, but strictly speaking not part of the ASCII standard.
Unicode and ASCII are both Codepoints + Encoding scheme
Unicode(UTF-8) is a superset of ASCII as its backward compatible with ASCII.
Conversion and Representation(in binary/hexadecimal) of String:
String := sequence of Graphemes(character is a "kind of" its subset).
Sequence of graphemes(characters) is converted into Codepoints (also using Encoding scheme)
Codepoints are Encoded(converted) to binary/hex also using Encoding Schemes
for Graphemes its UTF-8/UTF-32(aka Unicodes), for Character its ASCII.
Unicode(UTF-8) supports 1,112,064 valid character codepoints(covers most of the graphemes from different languages)
ASCII supports 128 character codepoints(mostly english)
This question already has answers here:
What is the difference between UTF-8 and Unicode?
(18 answers)
Closed 6 years ago.
Consider:
Is it true that unicode=utf16?
Many are saying Unicode is a standard, not an encoding, but most editors support save as Unicode encoding actually.
As Rasmus states in his article "The difference between UTF-8 and Unicode?":
If asked the question, "What is the difference between UTF-8 and
Unicode?", would you confidently reply with a short and precise
answer? In these days of internationalization all developers should be
able to do that. I suspect many of us do not understand these concepts
as well as we should. If you feel you belong to this group, you should
read this ultra short introduction to character sets and encodings.
Actually, comparing UTF-8 and Unicode is like comparing apples and
oranges:
UTF-8 is an encoding - Unicode is a character
set
A character set is a list of characters with unique numbers (these
numbers are sometimes referred to as "code points"). For example, in
the Unicode character set, the number for A is 41.
An encoding on the other hand, is an algorithm that translates a
list of numbers to binary so it can be stored on disk. For example
UTF-8 would translate the number sequence 1, 2, 3, 4 like this:
00000001 00000010 00000011 00000100
Our data is now translated into binary and can now be saved to
disk.
All together now
Say an application reads the following from the disk:
1101000 1100101 1101100 1101100 1101111
The app knows this data represent a Unicode string encoded with
UTF-8 and must show this as text to the user. First step, is to
convert the binary data to numbers. The app uses the UTF-8 algorithm
to decode the data. In this case, the decoder returns this:
104 101 108 108 111
Since the app knows this is a Unicode string, it can assume each
number represents a character. We use the Unicode character set to
translate each number to a corresponding character. The resulting
string is "hello".
Conclusion
So when somebody asks you "What is the difference between UTF-8 and
Unicode?", you can now confidently answer short and precise:
UTF-8 (Unicode Transformation Format) and Unicode cannot be compared. UTF-8 is an encoding
used to translate numbers into binary data. Unicode is a character set
used to translate characters into numbers.
most editors support save as ‘Unicode’ encoding actually.
This is an unfortunate misnaming perpetrated by Windows.
Because Windows uses UTF-16LE encoding internally as the memory storage format for Unicode strings, it considers this to be the natural encoding of Unicode text. In the Windows world, there are ANSI strings (the system codepage on the current machine, subject to total unportability) and there are Unicode strings (stored internally as UTF-16LE).
This was all devised in the early days of Unicode, before we realised that UCS-2 wasn't enough, and before UTF-8 was invented. This is why Windows's support for UTF-8 is all-round poor.
This misguided naming scheme became part of the user interface. A text editor that uses Windows's encoding support to provide a range of encodings will automatically and inappropriately describe UTF-16LE as “Unicode”, and UTF-16BE, if provided, as “Unicode big-endian”.
(Other editors that do encodings themselves, like Notepad++, don't have this problem.)
If it makes you feel any better about it, ‘ANSI’ strings aren't based on any ANSI standard, either.
It's not that simple.
UTF-16 is a 16-bit, variable-width encoding. Simply calling something "Unicode" is ambiguous, since "Unicode" refers to an entire set of standards for character encoding. Unicode is not an encoding!
http://en.wikipedia.org/wiki/Unicode#Unicode_Transformation_Format_and_Universal_Character_Set
and of course, the obligatory Joel On Software - The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!) link.
There's a lot of misunderstanding being displayed here. Unicode isn't an encoding, but the Unicode standard is devoted primarily to encoding anyway.
ISO 10646 is the international character set you (probably) care about. It defines a mapping between a set of named characters (e.g., "Latin Capital Letter A" or "Greek small letter alpha") and a set of code points (a number assigned to each -- for example, 61 hexadecimal and 3B1 hexadecimal for those two respectively; for Unicode code points, the standard notation would be U+0061 and U+03B1).
At one time, Unicode defined its own character set, more or less as a competitor to ISO 10646. That was a 16-bit character set, but it was not UTF-16; it was known as UCS-2. It included a rather controversial technique to try to keep the number of necessary characters to a minimum (Han Unification -- basically treating Chinese, Japanese and Korean characters that were quite a bit alike as being the same character).
Since then, the Unicode consortium has tacitly admitted that that wasn't going to work, and now concentrate primarily on ways to encode the ISO 10646 character set. The primary methods are UTF-8, UTF-16 and UCS-4 (aka UTF-32). Those (except for UTF-8) also have LE (little endian) and BE (big-endian) variants.
By itself, "Unicode" could refer to almost any of the above (though we can probably eliminate the others that it shows explicitly, such as UTF-8). Unqualified use of "Unicode" probably happens the most often on Windows, where it will almost certainly refer to UTF-16. Early versions of Windows NT adopted Unicode when UCS-2 was current. After UCS-2 was declared obsolete (around Win2k, if memory serves), they switched to UTF-16, which is the most similar to UCS-2 (in fact, it's identical for characters in the "basic multilingual plane", which covers a lot, including all the characters for most Western European languages).
UTF-16 and UTF-8 are both encodings of Unicode. They are both Unicode; one is not more Unicode than the other.
Don't let an unfortunate historical artifact from Microsoft confuse you.
The development of Unicode was aimed
at creating a new standard for mapping
the characters in a great majority of
languages that are being used today,
along with other characters that are
not that essential but might be
necessary for creating the text. UTF-8
is only one of the many ways that you
can encode the files because there are
many ways you can encode the
characters inside a file into Unicode.
Source:
http://www.differencebetween.net/technology/difference-between-unicode-and-utf-8/
In addition to Trufa's comment, Unicode explicitly isn't UTF-16. When they were first looking into Unicode, it was speculated that a 16-bit integer might be enough to store any code, but in practice that turned out not to be the case. However, UTF-16 is another valid encoding of Unicode - alongside the 8-bit and 32-bit variants - and I believe is the encoding that Microsoft use in memory at runtime on the NT-derived operating systems.
Let's start from keeping in mind that data is stored as bytes; Unicode is a character set where characters are mapped to code points (unique integers), and we need something to translate these code points data into bytes. That's where UTF-8 comes in so called encoding – simple!
It's weird. Unicode is a standard, not an encoding. As it is possible to specify the endianness I guess it's effectively UTF-16 or maybe 32.
Where does this menu provide from?
What is the difference between charsets and character encoding? When i say i am using utf-8 encoding then what will be my charset? Does it take unicode as charset by default?
UTF-8 is an encoding of the Unicode character set. Therefore if you're using UTF-8, the character set is Unicode, but you're not likely to have to specify this separately anywhere. The other main encoding of Unicode is UTF-16, which is not put into 8-bit byte streams because it contains zero bytes. If you are dealing with Unicode in a byte sequence, it is certainly encoded as UTF-8.
Other than Unicode, character sets are usually considered to have a single fixed encoding, and then terms like character set, charset, codepage, encoding are often used interchangeably, or depending on the vendor. This is sloppy but creates no runtime problems.
The only possible exceptions I can think of are East Asian: JIS and EUC originally defined multiple encodings for the same character set, but in practice today, each encoding is just treated separately.
Character set: definition which character has which numeric code point (ascii, jis, unicode)
Encoding: definition how the numeric code point is physically represented (utf, ucs, shiftjis)
According to Unicode terminology
ACR: Abstract Character Repertoire
= the set of characters to be encoded, for example, some alphabet or symbol set
CCS: Coded Character Set
= a mapping from an abstract character repertoire to a set of nonnegative integers
CEF: Character Encoding Form
= a mapping from a set of nonnegative integers that are elements of a
CCS to a set of sequences of particular code units of some specified width, such as 32-bit integers
CES: Character Encoding Scheme
= a reversible transformation from a set of sequences of code units (from one or more CEFs to a serialized sequence of bytes)
CM: Character Map
= a mapping from sequences of members of an abstract character repertoire to serialized sequences of bytes bridging all four levels in a single operation
TES: Transfer Encoding Syntax
= a reversible transform of encoded data, which may or may not contain textual data
Older protocols like MIME use "charset" when they really mean "character encoding scheme". Originally, different character encodings were though of as independent character repertoires instead of subsets of Unicode.
A character set defines the mapping between numbers and characters. Almost all char sets say 65 is A, and agree in general about mappings of numbers up to 127. But they might have different stands when it comes to numbers above 127.
There are a lot of character sets
EBCDIC
Double Byte Character Set
ANSI
Different OEM char sets
Unicode, an effort to create a single character set that included every reasonable writing system on the planet and some make-believe ones like Klingon, too.
When you say character encoding, you're talking about how a Unicode code point (a character) is stored internally.
In UTF-8 encoding, every code point from 0-127 is stored in a single byte. Only code points 128 and above are stored using 2, 3, in fact, up to 6 bytes.
There's something called UTF-7, which is a lot like UTF-8 but guarantees that the high bit will always be zero
There are hundreds of traditional encodings which can only store some code points correctly and change all the other code points into question marks. Some popular encodings of English text are Windows-1252 (the Windows 9x standard for Western European languages) and ISO-8859-1, aka Latin-1 (also useful for any Western European language).
UTF 7, 8, 16, and 32 all have the nice property of being able to store any code point correctly.
This post is almost entirely based on Joel Spolsky's post on Unicode: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets. Read it to get a better idea.
Charset is synonym for character encoding
Default encoding depends on the operating system and locale.
EDIT
http://www.w3.org/TR/REC-xml/#sec-TextDecl
http://www.w3.org/TR/REC-xml/#NT-EncodingDecl
It seems the most confusing issue to me.
How is the beginning of a new character recognized?
How are the codepoints allocated?
Let's take Chinese character for example.
What range of codepoints are allocated to them,
and why is it thus allocated,any reason?
EDIT:
Plz describe it in your own words,not by citation.
Or could you recommend a book that talks about Unicode systematically,which you think have made it clear(it's the most important).
The Unicode Consortium is responsible for the codepoint allocation. If you have want a new character or a code page allocated, you can apply there. See the proposal pipeline for examples.
Chapter 2 of the Unicode specification defines the general structure of Unicode, including what ranges are allocated for what kind of characters.
Take a look here for a general overview of Unicode that might be helpful: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses)
Unicode is a standard specified by the Unicode Consortium. The specification defines Unicode’s character set, the Universal Character Set (UCS), and some encodings to encode that characters, the Unicode Transformation Formats UTF-7, UTF-8, UTF-16 and UTF-32.
How is the beginning of a new character recognized?
It depends on the encoding that’s been used. UTF-16 and UTF-32 are encodings with fixed code word lengths (16 and 32 bits respectively) while UTF-7 and UTF-8 have a variable code word length (from 8 bits up to 32 bits) depending on the character point that is to be encoded.
How are the codepoints allocated? Let's take Chinese character for example. What range of codepoints are allocated to them, and why is it thus allocated,any reason?
The UCS is separated into so called character planes. The first one is Basic Latin (U+0000–U+007F, encoded like ASCII), the second is Latin-1 Supplement (U+0080–U+00FF, encoded like ISO 8859-1) and so on.
It is better to say Character Encoding instead of Codepage
A Character Encoding is a way to map some character to some data (and also vice-versa!)
As Wikipedia says:
A character encoding system consists of a code that pairs each character from a given repertoire with something else, such as a sequence of natural numbers, octets or electrical pulses, in order to facilitate the transmission of data (generally numbers and/or text) through telecommunication networks or storage of text in computers
Most popular character encodings are ASCII,UTF-16 and UTF-8
ASCII
First code-page that widely used in computers. in ANSI just one byte is allocated for each character. So ANSI could have a very limited set of characters (English letters, Numbers,...)
As I said, ASCII used videly in old operating systems like MS-DOS. But ASCII is not dead and still used. When you have a txt file with 10 characters and it is 10 bytes, you have a ASCII file!
UTF-16
In UTF-16, Two bytes is allocated of a character. So we can have 65536 different characters in UTF-16 !
Microsoft Windows uses UTF-16 internally.
UTF-8
UTF-8 is another popular way for encoding characters. it uses variable-length bytes (1byte to 4bytes) for characters. It is also compatible with ASCII because uses 1byte for ASCII characters.
Most Unix based systems uses UTF-8
Programming languages do not depend on code-pages. Maybe a specific implementation of a programming language do not support codepages (like Turbo C++)
You can use any code-page in modern programming languages. They also have some tools for converting the code-pages.
There is different Unicode versions like Utf-7,Utf-8,... You can read about them here (recommanded!) and maybe for more formal details here